Moxa Technologies EDS-210A-1GTX-1GSFP-4SFP, EDS-210A-1GSFP-1SFP Quick Installation Manual

P/N: 1802002100012

*1802002100012*

EDS-210A

Quick Installation Guide

Moxa EtherDevice Switch

Edition 3.0, February 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:
Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):
Toll

-free: 800-820-5036

Tel:

[phone]

Fax:

[phone]

Moxa Europe:
Tel:

[phone]

Fax:

[phone]

Moxa Asia-Pacific:
Tel:

[phone]

Fax:

[phone]

Moxa India:
Tel:

[phone]

Fax:

[phone]



2017 Moxa Inc. All rights reserved.

- 2 -

Overview

EDS-210A series 10-port industrial Ethernet switches are equipped with 1
Gigabit fiber optic Ethernet port, up to 8 10/100M copper ports, and 4
100M fiber optic Ethernet ports, making it ideal for applications that
require high bandwidth data co nvergence and long-distance up links. The
EDS-210A series provides 12/24/48 VDC redundant power inputs, has a
rugged IP30-rated metal housing, and is DIN-rail mountable. These
switches are compliant with FCC/UL/CE standards and undergo a 100%
burn-in test to ensure that they fulfill the special needs of industrial
automation control applications. The EDS-210A series has a -10 to 60°C
operating temperature range and is a lso available with wide-temperature
operation (-40 to 75°C).

NOTE

Throughout this Hardware Installation Guide, we use EDS as an
abbreviation for Moxa EtherDevice Switch:

EDS = Moxa EtherDevice Switch

Package Checklist

Your EDS is shipped with the following items. If any of these items is
missing or damaged, please contact your customer service
representative for assistance.

• Moxa EtherDevice™ Switch

• Protective caps for unused ports

• Quick installation guide (printed)

• Warranty card

Features

High Performance Network Switching Technology

• 10/100/1000BaseT(X) (EDS-210A-1GTX-1GSFP-4SFP only),
10/100BaseT(X) auto-negotiation speed, full/half duplex mod e, auto
MDI/MDI-X connection, and 100Base SFP slot /1000Base SFP slot.

• IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3ab
for 1000BaseT, and IEEE 802.3z for 1000BaseX.

• Store-and-forward switching process type.

Rugged Design

• Operating temperature range of -10 to 60°C, or extended operating
temperature of -40 to 75°C (T models only)

• IP30, rugged high-strength case

• DIN-rail or panel mounting available

• Redundant dual 12/24/48 VDC

- 3 -

Panel Layout of EDS-210A-1GSFP-1SFP/
EDS-210A-1GTX-1GSF-4SFP

1. Grounding screw

2. Terminal block for power input
(PWR1, PWR2) and relay output

3. Power input PWR1 LED

4. Power input PWR2 LED

5. TP port’s 10/100 Mbps LED

6.

TP port’s 10/100/1000 Mbps LED

7. SFP port's 100Mbps LED

8. SFP port's 1000Mbps LED

9. Port number

10.

10/100 BaseT(X) Port

11.

10/100/1000 BaseT(X) Port

12.

100Base SFP slot

13.

1000Base SFP slot

14.

Model Name

15.

Screw hole for wall mounting kit

16.

DIN rail kit

- 4 -

Mounting Dimensions unit = mm (in)

DIN-Rail Mounting

The aluminum DIN-rail attachment plate should already be fixed to the
back panel of the EDS when you take it out of the box. If y ou need to
reattach the DIN-rail attachment plate, make sure the metal spring is
situated towards the top, as shown in the figures below.

STEP 1:

Insert the top of the DIN

-rail into

the slot just below the metal spring.

STEP 2:
The DIN

-rail attachment unit will

snap into place as shown below.

To remove the DIN-rail from the EDS, simply reverse Steps 1 and 2 .

Wall Mounting (optional)

For some applications, you will find it convenient to mount the EDS o n the
wall, as illustrated below.

STEP 1:
Remove the aluminum DIN-rail
attachment plate from the
EDS’s rear panel, and then
attach the wall mount plates, as
shown in the

figure.