Moxa Technologies EDS-205A, EDS-208A Hardware Installation Manual
2014 Moxa Inc. All rights reserved.
P/N: 1802002050025
EDS-205A/208A Series
Hardware Installation Guide
Moxa EtherDevice Switch
Sixth Edition, April 2014
- 2 -
Overview
The EDS-205A/208A series of industrial Ethernet switches are entry-level
industrial 5 and 8-port Ethernet switches that support IEEE 802.3, IEEE
802.3u, and IEEE 802.3x with 10/100M, full/half-duplex, and MDI/MDIX
auto-sensing.
The EDS-205A/208A series provides 12/24/48 VDC (9.6 to 60 VDC)/18 to
30 VAC redundant power inputs that can be connected simultaneously to
a live AC/DC power source. The switches are available with a standard
operating temperature range from -10 to 60°C, or with a wide operating
temperature range from -40 to 75°C, and IP30 metal housing makes
them rugged enough for any harsh industrial environment.
To provide greater versatility for use with applications from different
industries, the EDS-205A/208A also allow users to enable or disable
broadcast storm protection with DIP switches on the outer panel.
The EDS-205A/208A switches can be easily installed with DIN-Rail
mounting as well as distribution boxes. The DIN-rail mounting capability
and IP30 metal housing with LED indicators make the plug-and-play
EDS-205A/208A switches reliable and easy to use.
NOTE
Throughout this Hardware Installation Guide, we use EDS as an
abbreviation f
or Moxa EtherDevice Switch:
EDS = Moxa EtherDevice Switch
ATTENTION
This device complies with part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Package Checklist
Your EDS is shipped with the following items. If any of these items is
missing or damaged, please contact your customer service
representative for assistance.
• Moxa EtherDevice™ Switch
• Hardware Installation Guide
• Moxa Product Warranty booklet
- 3 -
Panel Layout of EDS-205A/208A (Standard)
1. Grounding screw
2. Terminal block for
power input P1/P2
3. Heat dissipation orifices
4. DIP Switches
5. Power input P1 LED
6. Power input P2 LED
7. 10/100BaseT(X) Port
8. TP port’s 10/100 Mbps
LED
9. Model Name
10.
Screw hole for wall
mounting kit
11.
DIN-Rail Kit
- 4 -
Panel Layout of EDS-205A-M-SC/ST
NOTE:
The appearance of
EDS
-205A-S-SC is identical
to EDS
-205A-M-SC.
1. Grounding screw
2. Terminal block for
power input P1/P2
3.
Heat dissipation orifices
4. DIP Switches
5. Power input P1 LED
6. Power input P2 LED
7. 10/100BaseT(X) Port
8. TP port’s 10/100 Mbps
LED
9. Model Name
10.
100BaseFX Port
11.
FX port’
s 100 Mbps LED
12.
Screw hole for wall
mounting kit
13.
DIN-Rail Kit
- 5 -
Panel Layout of EDS-208A-M-SC/ST
NOTE:
The appearance of
EDS
-208A-S-SC is identical
to EDS
-208A-M-SC.
1. Grounding screw
2. Terminal block for
power input P1/P2
3. Heat dissipation orifices
4. DIP Switches
5. Power input P1 LED
6. Power input P2 LED
7. 10/100BaseT(X) Port
8. TP port’s 10/100 Mbps
LED
9. Model Name
10.
100BaseFX Port
11.
FX port’
s 100 Mbps LED
12.
Screw hole for wall
mounting kit
13.
DIN-Rail Kit
Loading...