Moxa Technologies DA-820-C8-DP-HV, DA-820-C7-DP-HV, DA-820 Series, DA-820-C8-DP-LV, DA-820-C7-SP-HV User Manual
...
DA-820 Series Embedded Computer
User’s Manual
Edition 2.1, August 2019
www.moxa.com/product
© 2019 Moxa Inc. All rights reserved.
DA-820 Series Embedded Computer
Moxa Americas
Toll
Tel:
Fax:
Moxa China (Shanghai office)
Toll
Tel:
Fax:
Moxa Europe
Tel:
Fax:
Moxa Asia
Tel:
Fax:
Moxa India
Tel:
Fax:
User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
© 2019 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
-free: 1-888-669-2872
+1-714-528-6777
+1-714-528-6778
+49-89-3 70 03 99-0
+49-89-3 70 03 99-99
+91-80-4172-9088
+91-80-4132-1045
-free: 800-820-5036
+86-21-5258-9955
+86-21-5258-5505
+886-2-8919-1230
-Pacific
+886-2-8919-1231
Table of Contents
1. Introduction ...................................................................................................................................... 1-1
Overview ........................................................................................................................................... 1-2
Model Descriptions and Package Checklist .............................................................................................. 1-2
Appearance ........................................................................................................................................ 1-3
Dimensions ........................................................................................................................................ 1-5
Features ............................................................................................................................................ 1-5
Hardware Block Diagram ..................................................................................................................... 1-6
DA-820 Basic System .................................................................................................................. 1-6
Hardware Specifications ...................................................................................................................... 1-6
2. Hardware Installation ....................................................................................................................... 2-1
Wiring Requirements ........................................................................................................................... 2-2
Connecting the Power ......................................................................................................................... 2-2
Wiring the Power Inputs ...................................................................................................................... 2-3
HIPOT (Dielectric Strength) Testing ...................................................................................................... 2-9
Reset Button .................................................................................................................................... 2-10
LED ................................................................................................................................................. 2-10
Connecting to a Display ..................................................................................................................... 2-11
Connecting USB Devices .................................................................................................................... 2-12
Installing a USB Dongle Kit ......................................................................................................... 2-12
Gigabit LAN Ports .............................................................................................................................. 2-15
Upgrading the Memory Module ........................................................................................................... 2-16
Installing a CFast Card ...................................................................................................................... 2-17
Installing SATA Hard Disks ................................................................................................................. 2-18
3. BIOS Setup ........................................................................................................................................ 3-1
Entering the BIOS Setup ...................................................................................................................... 3-2
Main Page .......................................................................................................................................... 3-3
Advanced Settings .............................................................................................................................. 3-4
Boot Configuration....................................................................................................................... 3-4
HDC Configuration ....................................................................................................................... 3-5
Video Configuration ..................................................................................................................... 3-8
PCI Express Graphics ................................................................................................................... 3-9
Chipset Configuration................................................................................................................. 3-10
Active Management Technology Support ...................................................................................... 3-12
PCI Express Configuration .......................................................................................................... 3-13
Hardware Monitor ...................................................................................................................... 3-14
SMART RECOVERY Info .............................................................................................................. 3-15
Security Settings .............................................................................................................................. 3-16
TPM Status ............................................................................................................................... 3-16
TPM Operation .......................................................................................................................... 3-16
TPM Force Clear ........................................................................................................................ 3-17
Set Supervisor Password ............................................................................................................ 3-17
Power Settings ................................................................................................................................. 3-18
Turbo Mode (C7 and C8 Models Only) .......................................................................................... 3-19
TXT (C7 and C8 Models Only) ..................................................................................................... 3-19
Auto Wake on S5 ...................................................................................................................... 3-19
Wake on LAN ............................................................................................................................ 3-19
Boot Settings ................................................................................................................................... 3-20
Boot Type ................................................................................................................................. 3-20
PXE Boot to LAN ........................................................................................................................ 3-20
Add Boot Options ...................................................................................................................... 3-20
USB Boot ................................................................................................................................. 3-20
EFI Device First ......................................................................................................................... 3-21
Boot Delay Time ........................................................................................................................ 3-21
Legacy ..................................................................................................................................... 3-21
Exit Settings .................................................................................................................................... 3-23
Exit Saving Changes .................................................................................................................. 3-23
Save Change Without Exit .......................................................................................................... 3-23
Exit Discarding Changes ............................................................................................................. 3-23
Load Optimal Defaults ................................................................................................................ 3-24
Load Custom Defaults ................................................................................................................ 3-24
Save Custom Defaults ................................................................................................................ 3-24
Discard Changes ....................................................................................................................... 3-24
Enable AMT (C7 and C8 Models Only) .................................................................................................. 3-24
Use AMT .......................................................................................................................................... 3-28
Upgrading the BIOS .......................................................................................................................... 3-29
A. Safety Installation Instructions ........................................................................................................ A-1
1
1. Introduction
Thank you for purchasing a Moxa DA-820 industrial computer, a multi-functional embedded computer designed
especially for IEC 61850-3 substation automation systems.
This manual covers hardware installation, connector interfaces, and BIOS setup of the DA-820. For software
configuration and management, please refer to the user’s manual for your operating system.
The following topics are covered in this chapter:
Overview
Model Descriptions and Package Checklist
Appearance
Dimensions
Features
Hardware Block Diagram
DA-820 Basic System
Hardware Specifications
DA-820 Series Introduction
1-2
Overview
The DA-820 computers are x86 platforms in a standard, 19-inch, 3U rack-mountable housing, with 2 VGA
outputs, 4 Gigabit Ethernet ports, an internal CFast socket for OS storage, 2 RS-232/422/485 serial ports, and
6 USB ports.
With dual power supplies, 4 SDD/HDD slots, and a native PRP/HSR expansion module with specialized
middleware, the DA-820 computers are designed for a wide variety of industrial automation applications to
achieve maximum availability. In addition, the DA-820 computers comply with the IEC 61850-3 and IEC 60255
standards, guaranteeing system stability and reliability when used in a power industry application. As an added
value, the DA-820 features a modular design with standard PCI and PCIe interfaces for tremendous integration
and expansion flexibility. Users can add a variety of communication modules or graphics card to any of the 2
PCI slots, 3 PCIe x1 slots, and 1 PCIe x16 slot.
Wide temperature models of the DA-820 operate reliably in a -40 to 75°C operating temperature range with a
high performance dual-core processor, offering an optimal solution for applications subjected to harsh
environmental conditions.
The DA-820 is compliant with the IEC 60255 standard, which covers the protection of electrical relays in a
smart substation. IEC 60255 is one of the most widely used standards for testing relays and protection
equipment, and compliance ensures that the DA-820 will work reliably and seamlessly with IEDs (intelligent
electronic devices) as a part of robust substation automation system.
Model Descriptions and Package Checklist
The DA-820 Series includes the following models:
• DA-820-C8-DP-HV: Rackmount computer with Intel i7-3612QE, quad-core 2.1 GHz CPU, 100 to 240 V
AC/DC power supplies x 2, -40 to 60°C operating temperature (without CFast/RAM/OS)
• DA-820-C8-SP-HV: Rackmount computer with Intel i7-3612QE, quad-core 2.1 GHz CPU, 100 to 240 V
AC/DC power supply, -40 to 60°C operating temperature (without CFast/RAM/OS)
• DA-820-C8-DP-LV: Rackmount computer with Intel i7-3612QE, quad-core 2.1 GHz CPU, 24 to 110 V DC
power supplies x 2, -40 to 60°C operating temperature (without CFast/RAM/OS)
• DA-820-C8-SP-LV: Rackmount computer with Intel i7-3612QE, quad-core 2.1 GHz CPU, 24 to 110 V DC
power supply, -40 to 60°C operating temperature (without CFast/RAM/OS)
• DA-820-C7-DP-HV: Rackmount computer with Intel i7-3555LE, dual-core 2.5 GHz CPU, 100 to 240 V
AC/DC power supply x 2, -40 to 60°C (without CFast/RAM/OS)
• DA-820-C7-SP-HV: Rackmount computer with Intel i7-3555LE, dual-core 2.5 GHz CPU, 100 to 240 V
AC/DC power supply, -40 to 60°C (without CFast/RAM/OS)
• DA-820-C7-DP-HV-T: Rackmount computer with Intel i7-3555LE, dual-core 2.5 GHz CPU, 100 to 240 V
AC/DC power supply x 2, -40 to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C7-SP-HV-T: Rackmount computer with Intel i7-3555LE, dual-core 2.5 GHz CPU, 100 to 240 V
AC/DC power supply, -40 to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C7-DP-LV-T: Rackmount computer with Intel i7-3555LE, dual-core 2.5 GHz CPU, 24 to 110 VDC
power supplies x 2, -40 to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C7-SP-LV-T: Rackmount computer with Intel i7-3555LE, dual-core 2.5 GHz CPU, 24 to 110 VDC
power supply, -40 to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C3-DP-LV-T: Rackmount computer with Intel i3-3217UE, dual-core 1.6 GHz, 24 to 110 VDC x 2,
-40 to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C3-SP-LV-T: Rackmount computer with Intel i3-3217UE, dual-core 1.6 GHz, 24 to 110 VDC, -40
to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C3-DP-HV-T: Rackmount computer with Intel i3-3217UE, dual-core 1.65 GHz, 100 to 240 V
AC/DC x2, -40 to 75°C operating temperature (without CFast/RAM/OS)
DA-820 Series Introduction
1-3
ATTENTION
Additional expansion modules are
• DA-820-C3-SP-HV-T: Rackmount computer with Intel i3-3217UE, dual-core 1.6.5 GHz, 100 to 240 V
AC/DC, -40 to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C1-DP-LV-T: Rackmount computer with Intel Celeron 1047UE, dual-core 1.4 GHz, 24 to 110 VDC
x 2, -40 to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C1-SP-LV-T: Rackmount computer with Intel Celeron 1047UE, dual-core 1.45 GHz, 24 to 110
VDC, -40 to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C1-DP-HV-T: Rackmount computer with Intel Celeron 1047UE, dual-core 1.45 GHz, 100 to 240
V AC/DC x 2 , -40 to 75°C operating temperature (without CFast/RAM/OS)
• DA-820-C1-SP-HV-T: Rackmount computer with Intel Celeron 1047UE, dual-core 1.45 GHz, 100 to 240
VAC/VDC, -40 to 75°C operating temperature (without CFast/RAM/OS)
Each model ships with following additional items:
• Rackmount kit
• Quick installation guide (printed)
• Warranty card
Optional Expansion Modules:
• DA-IRIG-B-S-02: IRIG-B expansion module, PCI interface, 1 fiber IRIG-B in, 1 DB9M in/out, 1 DB9M out
• DA-IRIG-B-S-04: IRIG-B expansion module, PCI interface, 1 fiber IRIG-B in, 1 DB9M in/out, 3 DB9M out
• DE-PRP/HSR: PRP/HSR expansion module, PCIe interface
• DE-GX02-SFP: 2-port 1,000 Mbps fiber card, SFP slots x 2, PCIe interface (does not include SFP module)
• DE-FX02-SFP: 2-port 10/100 Mbps fiber card, SFP slots x 2, PCIe interface (does not include SFP module)
Appearance
Front View
currently under development.
DA-820 Series Introduction
1-4
Rear View
*The power input supports two types of power supply (refer to the section "Connecting the Power" in Chapter
2 for details):
HV: 100 to 240 V AC/DC
LV: 24 to 110 VDC
DA-820 Series Introduction
1-5
Dimensions
Features
The DA-820 computer has the following features:
• Intel® Core™ Celeron, i3, and i7 CPU with QM77 chipset
• 2 x 204-pin SO-DIMM DDR3 sockets, supporting un-buffered ECC DDR3 memory at 1333 and 1600 MT/s,
16 GB max.
• 6 USB 2.0 ports for high speed peripherals
• 3 PCIe x1 slots and 2 PCI slots for expansion modules
• 1 PCIe x16 slot for an additional video card
• Highly reliable design, supporting dual power, RAID 0/1/5/10, and PRP/HSR technology (with PRP/HSR
expansion module)
• Cybersecurity function
• IEC 61850-3 (general requirements for electrical substation automation, EMC Level 4, C3, Bm)
• IEEE 1613 compliant (environmental and testing requirements for communications networking devices in
electric power substations)
• IEC 60255 compliant (measuring relays and protection equipment)
Unit = mm (inch)
DA-820 Series Introduction
1-6
NOTE
T
Hardware Block Diagram
DA-820 Basic System
Hardware Specifications
he latest specifications for Moxa’s products can be found at https://www.moxa.com.
2
2. Hardware Installation
The DA-820 embedded computers are compact and rugged, making them suitable for industrial applications.
The LED indicators allow users to monitor performance and identify trouble spots quickly, and multiple ports
are provided for connecting a variety of different devices. The DA-820 embedded computers come with a
reliable and stable hardware platform that lets you devote the bulk of your time to application development.
This chapter describes hardware installation and connector interfaces of the DA-820 embedded computers.
The following topics are covered in this chapter:
Wiring Requirements
Connecting the Power
Wiring the Power Inputs
HIPOT (Dielectric Strength) Testing
Reset Button
LED
Connecting to a Display
Connecting USB Devices
Installing a USB Dongle Kit
Gigabit LAN Ports
Upgrading the Memory Module
Installing a CFast Card
Installing SATA Hard Disks
DA-820 Series Hardware Installation
2-2
ATTENTION
Do not run signal or communication wiring and power wiring in the same wire conduit. To avoid interference,
wires with different signal characteristics should be routed separately.
ATTENTION
Safety First!
Be sure to disconnect the power
Electrical Current Caution!
Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes
dictating the maximum current allowable for each wire size.
If the current
equipment.
Temperature Caution!
Be
plugged in, the internal components generate heat, and
consequently the
Wiring Requirements
The following common safety precautions should be observed before installing any electronic device:
• Power wires and communication/signal wires should be routed through separate paths. If power and
communication/signal wires must cross paths, make sure the wires are perpendicular at the intersection
point.
NOTE: Do not run signal or communication wiring and power wiring in the same wire conduit. To avoid
interference, wires with different signal characteristics should be routed separately.
• Use the type of signal transmitted through a wire to determine which wires should be bundled together and
which kept separate. The rule of thumb is that wiring that carries similar electrical signals can be bundled
together.
• When necessary, we strongly advise labeling the wiring for all devices in the system.
careful when handling the unit. When the unit is
cord before installing and/or wiring your device.
goes above the maximum rating, the wiring could overheat, causing serious damage to your
outer casing may feel hot to the touch.
Connecting the Power
To power on the DA-820 embedded computer, connect the power line to the DA-820’s power connector
(located on the right side of the rear panel) using the power cord shipped with the product, and then turn on
the power switch. If the power is properly supplied, the Power LED will light up first, and then the Storage LED
will start blinking when the Flash Disk Module is accessed during boot up. It takes about 30 to 60 seconds for
the operating system to boot up.
DA-820 Series Hardware Installation
2-3
is connected to the Line terminal for the AC
the ground conductor for all surge and transient suppression
is connected to the Safety Ground terminal
for AC inputs. Chassis ground connects to both power supply
terminal
for AC inputs. Chassis ground connects to both power supply
a jumper on the terminal block. Surge Ground is used as the
is connected to the Line terminal for the AC
Wiring the Power Inputs
Refer to the following diagrams and table for a detailed description of the power input wiring. The terminal
numbers referred to in the table are shown in the leftmost diagram below.
Terminal Number Description Note
1 PWR1 Line
2 PWR1 Neutral
3 PWR1 Surge Ground
4 Chassis Ground
5 Relay COM port
6 Relay Open
7 Chassis Ground
PWR1 Line (+)
power source.
PWR1 Neutral (–) is connected to the Neutral terminal for
the AC power source.
PWR1 Surge Ground is connected to the Chassis Ground
via a jumper on the terminal block. Surge Ground is used as
circuitry.
NOTE: Surge Ground must be disconnected from Chassis
Ground during HIPOT (dielectric strength) testing.
Chassis Ground
surge grounds via a removable jumper.
Chassis Ground is connected to the Safety Ground
surge grounds via a removable jumper.
PWR2 Surge Ground is connected to the Chassis Ground via
8 PWR2 Surge Ground
9 PWR2 Line
10 PWR2 Neutral
ground conductor for all surge and transient suppression
circuitry. NOTE: Surge Ground must be disconnected from
Chassis Ground during HIPOT (dielectric strength) testing.
PWR2 Line (+)
power source.
PWR2 Neutral (-) is connected to the Neutral terminal for
the AC power source.
DA-820 Series Hardware Installation
2-4
For AC Power Input
1. PWR1 Line should be connected to AC (Line).
2. PWR1 Neutral should be connected to AC (Neutral).
3. Surge Ground is connected to the Chassis Ground via a braided cable or other appropriate grounding wire.
Surge Ground is used as the ground conductor for all surge and transient suppression circuitry internal to
the protection board.
4. Chassis Ground should be connected to the AC Ground terminal.
Alternating Current (AC), Single Power
Models: DA-820-C8-SP-HV, DA-820-C7-SP-HV-T
DA-820 Series Hardware Installation
2-5
Alternating Current (AC), Dual Power
Models: DA-820-C8-DP-HV, DA-820-C7-DP-HV-T
DA-820 Series Hardware Installation
2-6
Direct Current (DC), Single Power
Models: DA-820-C8-SP-HV, DA-820-C8-SP-LV, DA-820-C7-SP-HV-T, DA-820-C7-SP-LV-T
DA-820 Series Hardware Installation
2-7
Direct Current (DC), Dual Power
Models: DA-820-C8-DP-HV, DA-820-C8-DP-LV, DA-820-C7-DP-HV-T, DA-820-C7-DP-LV-T
DA-820 Series Hardware Installation
2-8
ATTENTION
Surge Ground MUST be disconnected from the Chassis Ground during HIPOT (dielectric strength) testing.
ground transient energy is shunted to the Surge Ground terminal. In cases where users require
remove the ground braid between Surge and Chassis Ground.
1. Equipment must be installed according to the applicable country wiring codes.
2.
3. All line-to-
the inputs to be isolated from the ground,
Note that all line-to-ground transient protection circuitry will be disabled.
DA-820 Series Hardware Installation
2-9
Before performing the HIPOT test, you MUST
remove
braided ground cable. Doing so can prevent
the transient/surge suppression circuitry
(
from
being activated during the HIPOT test.
HIPOT (Dielectric Strength) Testing
the jumpers and disconnect the
which is connected to Surge Ground)
When finished, press the Power Switch button to start the system. It will take about 30 to 60 seconds for your
operating system to boot up.
Loading...