Moxa Technologies CP-132EL, CP-132EL-I Quick Installation Manual

P/N: 1802001320021

*1802001320021*

CP-132EL/CP-132EL-I

Quick Installation Guide

PCI Express Multiport Serial Board

Edition 2.0, February 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:
Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):
Toll

-free: 800-820-5036

Tel:

[phone]

Fax:

[phone]

Moxa Europe:
Tel:

[phone]

Fax:

[phone]

Moxa Asia-Pacific:
Tel:

[phone]

Fax:

[phone]

Moxa India:
Tel:

[phone]

Fax:

[phone]



2017 Moxa Inc. All rights reserved.

- 2 -

Overview

Moxa’s new PCI Express multiport serial boards, the CP-132EL and
CP-132EL-I, are designed for POS and ATM applications and for use by
industrial automation system manufacturer s and system integrators. Th e
boards are compatible with all popular operating systems and support
data rates of up to 921.6Kbps as well as full modem control signals,
ensuring compatibility with a wide range of serial peripherals. In addition ,
the CP-132EL and CP-132EL-I work with PCI Express ×1, allowing the
boards to be installed in any availa ble PCI Express slot (including ×1 , ×2,
×4, ×8, ×16, and ×32).

Package Checklist

Before installing the PCI Express board, verify that the package co ntains
the following items:

• 1 PCI Express serial board

• Documentation and Software CD

• Quick installation guide (printed)

• Low Profile Bracket

Notify your sales representative if any of the above items is missing or
damaged.

Hardware Installation Procedure

The PCI Express board MUST be plugged into the PC before the driver is
installed. Follow these steps to install the board in the PC.

STEP 1: Power off the PC.
STEP 2: Plug the board firmly into an open PCI Express slot.
STEP 3: Fasten the holding screw to fix the control board in place.
STEP 4: Connect the connection cable.
STEP 5: Power on the PC; the BIOS will automatically set the IRQ and I/O

address.

Software Installation Information

The board MUST be plugged in before installing the driver. See the
previous section for instructions on how to install the board in your PC.
Refer to the PCI Express Board User’s Manual fo r detailed instructions on
installing the drivers for this board.

NOTE

The following procedure shows how to install the CP-132EL
driver.