Moxa Technologies CN2610-16-2AC, CN2610-16, CN2650-8, CN2650-8-2AC-T, CN2650-16 Quick Installation Manual

P/N: 1802026000217

*1802026000217*

CN2600 Series

Quick Installation Guide

Edition 6.1, November 2018

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:
Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):
Toll

-free: 800-820-5036

Tel:

[phone]

Fax:

[phone]

Moxa Europe:
Tel:

[phone]

Fax:

[phone]

Moxa Asia-Pacific:
Tel:

[phone]

Fax:

[phone]

Moxa India:
Tel:

[phone]

Fax:

[phone]



2018 Moxa Inc. All rights reserved.

- 2 -

Overview

The Moxa CN2600 dual-LAN terminal servers have 8 or 16 RS-232 or
RS-232/422/485 ports and dual 10/100 Mbps Ethernet LAN ports, and
some models come with dual AC power inputs. The CN2600 terminal
servers are used to connect terminals, modems, printers, and other
serial devices to LAN hosts, and all models comply with TCP/IP and
IEEE 802.3 specifications using standard twisted pair 10/100BaseTX
cable as the transmission medium.

CN2600 Series Models

The CN2600 Series includes the following models: CN2610-8, CN2610­8-2AC, CN2610-16, CN2610-16-2AC, CN2650-8, CN2650-8-2AC-T,
CN2650-8-2AC, CN2650-16, CN2650-16-2AC-T, CN2650-16-2AC,
CN2650I-8, CN2650I-8-2AC, CN2650I-16, CN2650I-16-2AC, CN2650I­8-HV-T, CN2650I-16-HV-T.

Package Checklist

The CN2600 dual-LAN terminal server products are shipped with the
following items:

• 1 CN2600 Series terminal server

• Power cord (AC models only)*

• 1 DB9 serial cable (CBL-RJ45F9-150)

• 1 DB25 serial cable (CBL-RJ45M25-150)

• Rackmount kit (includes 2 brackets and 8 screws)

• Quick installation guide (this guide)

*Power cords are available with US, Euro, UK, and JP plugs.

Hardware Introduction

NOTE

The wide temperature models do not come with the LCM
display panel and push buttons. The LCM description below
applies only to standard temperature models.

Front Panel

LED

Color

Description

Reset None Press the Reset button for 5 seconds to load

factory defaults. The CN2600 will beep twice

when the configuration has been reset.

Ready
Red

Used for configuring the IP address and other
parameters.

Green

Lights up when the CN2600 system is ready.

Serial Tx

Green

Flashes to indicate serial port transmission.

Serial Rx

Yellow

Flashes to indicate serial port reception.