Moxa Technologies 5100 User Manual

3
Serial Device Servers
Serial Device Servers
5100 Series
1-port Serial Device Servers
Features
Small size Real COM/TTY drivers for Windows and Linux Standard TCP/IP interface and versatile operation modes Easy-to-use Windows utilty for mass installation Built-in 15 KV ESD protection for all serial signals SNMP MIB-II for network management Configuration by Telnet or web browser Adjustable termination resistor for the RS-485 port
Overview
NPort 5100 device servers are designed to make industrial serial devices instantly Internet-ready. Their small size makes them ideal for connecting devices such as card readers or payment terminals to an
Most Cost-Effective Serial-to-Ethernet Solution
Using serial-to-Ethernet to connect legacy serial devices to Ethernet is no longer a novel solution. Users now expect to be able to find device servers that are cost-effective, provide a broad selection of different
functions, and are high quality. With its full support of Microsoft and Linux operating systems and solid 5-year warranty, NPort 5100 is one of the best device server solutions in the worldwide industrial market.
Adjustable Termination and Pull High/Low Resistors
In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor
values is universally compatible for all environments, NPort 5100 device servers allow user adjustment of termination and pull high/low resistor values for each serial port, using jumpers.
Standard TCP/IP Interface and Versatile Operation Modes
The NPort 5110 can operate in TCP Server, TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode, ensuring
compatibility with software based on a standard network API (Winsock, BSD Sockets).
Real COM/TTY Drivers for Existing Software
With the Real COM/TTY drivers that are provided with each NPort, software designed for communication with COM/TTY ports can be instantly and seamlessly integrated into a TCP/IP network. This is
an excellent way to preserve your software investment and enjoy the benefits of networking your serial devices, with no fuss.
3-15
Easy Troubleshooting
NPort 5100 device servers support SNMP V2, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an
e-mail alert can be sent instead. Users can define the trigger for those alerts using MOXA’s Windows utility or the web console. For example, alerts can be triggered by a warm start, a cold start, or a change in password.
www. m o x a . c o m e - m a i l : i n f o @ m o x a . c o m
NPort 5110, 5130, 5150
Total Solutions for Industrial Device Networking
Power input
12 to 48 VDC
DK-35A
Power jack
RJ45 10/100 Mbps
Ethernet
Reset button
RS-232/422/485
RJ45 10/100 Mbps
Reset button
Power input
Power jack
12 to 48 VDC
Ethernet
RS-232
Power input
Power jack 12 to 48 VDC
Reset button
Ethernet
RT45 10/100 Mbps
3
Serial Device Servers
RS-422/485
Ordering Information
NPort 5110: 1-port RS-232 device server NPort 5130: 1-port RS-422/485 device server NPort 5150: 1-port RS-232/422/485 device server
Package Checklist
• 1 NPort 5100 Device Server
• Power Adaptor
• Quick Installation Guide
• NPort Document and Software CD-ROM
Optional Accessories
DK-35A: DIN-Rail Mounting Kit (35 mm)
www. m o x a . c o m e - m a i l : i n f o @ m o x a . c o m
3-16
Serial Device Servers
1
12-48
3
Port 1 RS-422/485
12-48
5
Port 1 RS-232/422/485
12-48
Dimensions (unit = mm)
3
Serial Device Servers
NPort 5110
NPort 5130 NPort 5150
Pin Assignment
NPort 5110 NPort 5130
1 2 3 4 5
1 2 3 4 5
NPort 5150
6 7 8 9
PIN RS-232
1 DCD 2 RxD 3 TxD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS
6 7 8 9
PIN RS-422/485 (4W) RS-485 (2W)
1 TxD-(A) 2 TxD+(B) 3 RxD+(B) Data+(B) 4 RxD-(A) Data-(A) 5 GND GND 6 7 8 9
1 2 3 4 5
6 7 8 9
PIN RS-232 RS-422/485 (4W) RS-485 (2W)
1 DCD TxD-(A) 2 RxD TxD+(B) 3 TxD RxD+(B) Data+(B) 4 DTR RxD-(A) Data-(A) 5 GND GND GND 6 DSR 7 RTS 8 CTS 9
3-17
www. m o x a . c o m e - m a i l : i n f o @ m o x a . c o m
Specifications
Total Solutions for Industrial Device Networking
LAN
Ethernet: 10/100 Mbps, RJ45 Protection: Built-in 1.5 KV magnetic isolation
NPort 5110 Serial Interface
Interface: RS-232 No. of Ports: 1 Port Type: DB9 (Male) Transmission Speed: 100-230.4 Kbps Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Serial Line Protection: 15 KV ESD for all signals
NPort 5130 Serial Interface
Interface: RS-422/485 No. of Ports: 1 Port Type: DB9 (Male) Transmission Speed: 50-921.6 Kbps Signals
RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (2-wire): Tx+, Tx-, Rx+, Rx-, GND
Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction: ADDC™ (Automatic Data Direction Control)
NPort 5150 Serial Interface
Interface: RS-232/422/485 No. of Ports: 1 Port Type: DB9 (Male) Transmission Speed: 50-921.6 Kbps Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction ADDC™ (Automatic Data Direction Control) Power Line Protection: 4 KV burst (EFT), EN61000-4-4, 2 KV surge, EN61000-4-5
Advanced Built-in Features: Watchdog timer
Serial Communication Parameters
Parity: None, Even, Odd, Space, Mark Data Bits: 5, 6, 7, 8 Stop Bit(s): 1, 1.5, 2 Flow Control: RTS/CTS, DTR/DSR (for RS-232 only), XON/XOFF
Software Features
Protocols:
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP Utilities: NPort Administrator for Windows 95/98/ME/NT/2000/XP/2003/Vista OS Driver Support: Windows 95/98/ME/NT/2000/XP/2003/XP x64/2003 x64/ COM driver/
Linux Real TTY driver/SCO Unix/SCO OpenServer 5/UnixWare 7/Unix Ware 2.1.x/SVR4.2/QNX
Configuration: Web console, serial console, Telnet console, or Windows utility
Power Requirements
Power Input: 12 to 48 VDC Power Consumption:
NPort 5110: 128.7 mA@12V, 72 mA@24V NPort 5130: 200 mA@12V, 106 mA@24V NPort 5150: 200 mA@12V, 106 mA@24V
Mechanical
Casing: Aluminum case (1 mm) Dimensions (W × H × D): 50 × 80 × 22 mm (1.97 × 3.15 × 0.87 in) Gross Weight: 0.580 kg
Environment
Operating Temperature:
0 to 55°C (32 to 131°F), 5 to 95%RH
-40 to 75°C (-40 to 167°F) for wide temperature models
Storage Temperature: -20 to 85°C (-4 to 185°F), 5 to 95%RH
Regulatory Approvals
EMC FCC Class A, CE Class A, Safety UL, CUL, TÜV
Warranty: MTBF
NPort 5110: 279/22 hrs NPort 5130: 246505 hrs NPort 5150: 246034 hrs
5 years
3
Serial Device Servers
www. m o x a . c o m e - m a i l : i n f o @ m o x a . c o m
3-18
Loading...