Moxa Z2150 Users Manual
Moxa Industrial ZigBee Module SLEZ2150
User’s Manual
First Edition, November 2011
www.moxa.com/product
© 2011 Moxa Inc. All rights reserved.
Moxa Industrial ZigBee Module SLEZ2150
Moxa Americas
Toll
Tel:
Fax:
Moxa China (Shanghai office)
Toll
Tel:
Fax:
Moxa Europe
Tel:
Fax: +49-89-3 70 03 99-99
Moxa Asia
Tel:
Fax: +886-2-8919-1231
User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
© 2011 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
-free: 1-888-669-2872
+1-714-528-6777
+1-714-528-6778
+49-89-3 70 03 99-0
-free: 800-820-5036
+86-21-5258-9955
+86-21-5258-5505
+886-2-8919-1230
-Pacific
Table of Contents
1. Introduction ...................................................................................................................................... 1-1
Overview ........................................................................................................................................... 1-2
Features ............................................................................................................................................ 1-2
Specifications ..................................................................................................................................... 1-2
2. Gettting Started ................................................................................................................................ 2-1
Module Layout .................................................................................................................................... 2-2
Block Diagram .................................................................................................................................... 2-2
Connector Locations ............................................................................................................................ 2-3
Hardware Installation .......................................................................................................................... 2-3
Software Installation ........................................................................................................................... 2-3
A. Regulatory Statements...................................................................................................................... A-1
Loading...