Moxa UC-2112-T-LX, UC-2111-LX, UC-2104-LX, UC-2101-LX, UC-2112-LX User Manual

P/N: 1802021000112

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:
Toll
Tel:
Fax:

Moxa China (Shanghai office):
Toll
Tel:
Fax:

Moxa Europe:
Tel:
Fax:

Moxa Asia-Pacific:
Tel:
Fax:

Moxa India:
Tel:
Fax:

2019 Moxa Inc. All rights reserved.

UC-2100 Series

Quick Installation Guide

Version 3.0, March 2019

-free: 1-888-669-2872
1-714-528-6777

1-714-528-6778

[phone]

[phone]

[phone]

[phone]



-free: 800-820-5036
[phone]

[phone]

[phone]

[phone]

*1802021000112*

Overview

NOTE

The console cable and power jack can be found beneath the
molded pulp cushioning inside the product box.

The UC-2100 Series computing platform is designed for embedded data
acquisition and processing applications. The computer comes with up to
two software-selectable RS-232/422/485 full-signal seria l ports and
single or dual Ethernet LAN ports. In addition, the Arm-based computing
platform is available in various models that can fulfill diverse interface
requirements, such as single and dual serial, LAN ports, and gigabit
Ethernet, and wireless connections. These versatile communication
capabilities let u sers efficiently adapt the palm-sized UC-2100 computing
platfor m to a variety of complex communications solutions.

Model Names and Package Checklist

The UC-2100 Serie s includes the following models:

UC-2101-LX: Palm-sized industrial computing platform with 1 serial p ort,
1 Ethernet port, -10 to 60°C operating temperature

UC-2102-LX: Palm-sized industrial computing platform with 2 Ethernet
ports, -10 to 60°C operating temperature

UC-2104-LX: Palm-sized industrial computing platform with 1 Min i PCIe
socket for wireless module, 1 Ethernet port, -10 to 70°C operating
temperature

UC-2111-LX: Palm-sized industrial computing platform with 2 serial
ports, 2 Ethernet ports, Micro SD socket, -10 to 60°C operating
temperature

UC-2112-LX: palm-sized industrial computer with 1 GHz processor, 2
serial ports, 2 Ethernet ports (1 gigabit Ethernet), Micro SD socket, -10 to
60°C operating temperature

UC-2112-T-LX: Palm-sized indust rial computing platform with 1 GH z
processor, 2 serial ports, 2 Ethernet ports (1 gigabit Ethernet), Micro SD
socket, -40 to 75°C operating temperature

Before installing a UC-2100 computer, verify that the package contains
the following ite ms:

• UC-2100 Series computer

• Console cable

• Power jack

• Quick Installation Guide (printed)

• Warranty card
Notify your sales representative if any of the above items are missing or
damaged.

- 2 -

Appearance

UC-2101

UC-2102

- 3 -

UC-2104

UC-2111

UC-2112

- 4 -

LED Indicators

LED Name

Status

Function

Green

Power is on, and the device is functioning
normally

Off

Power is off

Green

Steady On: 10 Mbps Ethernet link
Blinkin g: Data transmission is in progress

Yel lo w

Steady On: 100 Mbps Ethernet link
Blinkin g: Data transmission is in progress

Off

Speed lower than 10 Mbps or the cable is
not connected

Green

only)

Steady On: 100 Mbps Ethernet link

Yel lo w

only)

Steady On: 1000 Mbps Ethernet link

Green

Serial port is transmitting data

Off

Serial port is not transmitting data

Yel lo w

Serial port is rece iving data

Off

Serial port is not receiving data

User

Green/Yellow

User Programmable

LEDs that

strength

Yel lo w

The number of glowing LEDs indicates

1 LED : Poor

Off

Wireless module is not detected

The function of each LED is described in the table below:

Power

Ethernet

(UC-2112

Blinkin g: Data transmission is in progress

(UC-2112

Serial (Tx)

Serial (Rx)

indicate
the
Wireless
signal

Blinkin g: Data transmission is in progress

the signal strength
3 LEDs: Excellent
2 LEDs : Good

Reset Button

The UC-2100 panel computer is provided with a reset button, which is
located on the top panel of the computer. To reboot the computer, press
the reset button for 1 second. Press and hold the reset button between 7
to 9 seconds to reset the computer to the factory default settings. When
the reset button is held down, the User LED (the first signal LED on
UC-2104) will blink once every second. The User LED will become steady
when you hold the button continuously for 7 to 9 seconds. Release the
button within this period to load the factory default sett ings.

Installing the Computer

Wall or Cabinet Mounting

Use two screws per side to mount the UC-2100 Series on a wall or inside
a cabinet.

- 5 -