Moxa TN-5510A, TN-5508A User Manual

P/N: 1802055080022

Technical Support Contact Information

www.moxa.com/support

Moxa Americas: Toll Tel: Fax:

Moxa China (Shanghai office): Toll Tel: Fax:

Moxa Europe: Tel: Fax:

Moxa Asia-Pacific: Tel: Fax:

Moxa India: Tel: Fax:

TN-5508A/5510A

Quick Installation Guide

Moxa ToughNet Switch

Edition 3.0, February 2017

-free: 1-888-669-2872 1-714-528-6777

1-714-528-6778

+49-89-3 70 03 99-0

+49-89-3 70 03 99-99

+91-80-4172-9088

+91-80-4132-1045



-free: 800-820-5036 +86-21-5258-9955

+86-21-5258-5505

+886-2-8919-1230

+886-2-8919-1231

*1802055080022*

Overview

The ToughNet TN-5508A/5510A series M12 managed Ethernet switches are designed for industrial applications in harsh environments. The TN series switches use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental dist u rbances, such as vibration and shock. The wide 24 to 110 VDC with dual power input (non-PoE series) increases the reliability of your communications.

The TN-5508A series includes PoE and non-PoE switches.

• TN-5508A series: 8 Fast Ethernet M12 ports.

• TN-5508A-8PoE series: 8 PoE Fast Ethernet M12 ports. The TN-5510A series also includes PoE and non-PoE switches.

• TN-5510A series: 8 Fast Ethernet M12 ports, supports additional 2 Gigabit ports located on the bottom of the unit, with or without bypass function.

• TN-5510A-8PoE series: 8 PoE Fast Ethernet M12 ports, supports additional 2 Gigabit ports located on the bottom of the unit, with o r without bypass function.

The -40 to 75°C operating temperature an d IP54 rated waterproof enclosure allow deployment in harsh environments. The TN-5508A/5510A series Ethernet switches are compliant with EN 50155/50121-4 (railway applications) requirements, covering operating temperature, power input voltage, surge, ESD and vibration, mak ing the switches suitable for a variety of industrial applications

Package Checklist

Your ToughNet TN-5508A/5510A switch is shipped with the following items. If any of these items is missing or damaged, please contact your customer service representative for assistance.

• 1 Moxa ToughNet switch.

• M12 to DB9 console port cable.

• 2 protective caps for console and relay output ports

• Panel mounting screws.

• Quick installation guide (printed).

• CD-ROM with user’s manual.

• Warranty card.

Features

Anti-Vibration Circular Connectors for Robust Links

• M12 D-coding 4-pin female connectors for Fast Ethernet 10/100BaseT(X) ports.

• M12 X-coded 8-pin female connectors for Gigabit Ethernet 10/100/1000BaseT(X) ports

• M12 A-coding 5-pin male connectors for console and relay output.

• M23 6-pin male connectors for power input.

Isolated Power Inputs

• Supports 24-110 VDC (16.8 to 137.5 VDC).

- 2 -

High Performance Network Switching Technology

• IPv6 ready, certified by the IPv6 Logo Committee.

• IEEE 1588 PTP (Precision Time Protocol) for the precise time synchronization of networks.

• DHCP Option 82 for IP address assignment with different policies.

• EtherNet/IP and Modbus/TCP industrial Ethernet protocols supported.

• Turbo Ring and Turbo Chain (recovery time <20 ms @250 switches),and STP/RSTP/MSTP for network redundancy

• IGMP Snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols.

• Port-based VLAN, IEEE802.1Q VLAN, and GVRP protocol to ease network planning.

• QoS (IEEE 802.1p/1Q and ToS/DiffServ) allows real-time traffic classification and prioritization.

• 802.3ad, LACP for optimum bandwidth utilization.

• TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security

• SNMP v1/v2c/v3 for different levels of network management.

• RMON for efficient network monitoring and proactive capability.

• Bandwidth management prevents unpredictable network status.

• Lock port allows access by only authorized MAC addresses.

• Port mirroring for online debugging.

• Automatic warning by exception through email, relay output.

• Automatic recovery of connected devices’ IP addresses.

• Line-swap fast recovery.

• LLDP for automatic topology discovery through network management software.

• Loop protection prevents network loops

• Configurable through Web browser, Telnet/Serial console, CLI, and Windows utility.

Designed for Industry-specific Applications

• Two Gigabit Ethernet ports to meet high bandwidth requirements.

• Bypass relay option on the 2 Gigabit Ethernet ports ensure non-stop data communication in the event a switch stops working due to a power failure.

• EN 50155/50121-4 compliant.

• -40 to 75°C operating temperature range.

• IP54 rugged high-strength case.

• Panel mounting or DIN-Rail mounting installation capability.

Recommended Optional Accessories

• CBL-M23(FF6P)Open-BK-100-IP67: 1-meter M23 to 6-pin power cable with IP67-rated female 6-pin M23 connector.

• CBL-M12D(MM4P)/RJ45-100 IP67: 1-meter M12-to-RJ45 Cat-5E UTP Ethernet cable with IP67-rated male 4-pin M12 D-coded connector.

• CBL-M12(FF5P)/OPEN-100 IP67: 1-meter M12-to-5-pin power cable with IP67-rated female 5-pin M12 A-coded connector.

• M12D-4P-IP68: Field-installable M12 D-coded screw-in connector, male 4-pin, IP68-rated.

• M12A-5P-IP68: Field-installable M12 A-coded screw-in connector, female 5-pin, IP68-rated.

• CAP-M12F-M: Metal cap for M12 female connector

• DK-DC50131: DIN-Rail mounting kit, 50 x 131 mm.

- 3 -

TN-5508A/5510A Panel Layouts

1. Model name.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

5510A

User's Manual).

2. Screw holes for panel mounting kit.

3. Console port.

4. Grounding screw.

5. Relay output port.

6. Power input voltage range indication.

7. Power input port (male 5-pin shielded M23 connector).

8. PWR1 LED: for power input 1.

9. PWR2 LED: for power input 2.

FAULT LED. MSTR/HEAD LED: for ring master or chain head. CPLR/TAIL LED: for ring coupler or chain tail. TP port’s 10/100 Mbps LED. 10/100BaseT(X) port (M12 D-coded 4-pin female connector) Waterproof vent. Product label. 12 Screw holes for DIN-Rail mounting kit. E2 LED: Not used by the TN-5508A series. E1 LED: Not used by the TN-5508A series. Gigabit Ethernet port E1 (corresponding to port 9 in the TN-5510A

User's Manual).

Gigabit Ethernet port E2 (corresponding to port 10 in the TN-

- 4 -

TN-5508A-8PoE/5510A-8PoE Panel Layouts

1. Model name

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

5510A

User's Manual)

2. Screw holes for panel mounting kit

3. Console port

4. Grounding screw

5. Relay output port

6. Power input voltage range indication

7. Power input port (male 5-pin shielded M23 connector)

8. PWR1 LED: for power input 1

9. PWR2 LED: for power input 2

FAULT LED MSTR/HEAD LED: for ring master or chain head CPLR/TAIL LED: for ring coupler or chain tail TP port’s 10/100 Mbps LED 10/100BaseT(X) port (M12 D-coded 4-pin female connector) Waterproof vent Product label 12 Screw holes for DIN-Rail mount ing kit E2 LED: Down-side E2 Gigabit port's 10/100/1000 Mbps LED E1 LED: Down-side E1 Gigabit port's 10/100/1000 Mbps LED Gigabit Ethernet port E1 (corresponding to port 9 in the TN-5510A

User's Manual)

Gigabit Ethernet port E2 (corresponding to port 10 in the TN-

- 5 -

ATTENTION

DO NOT open or remove the vent (#15). Once the seal has been removed, the warranty becomes invalid. Exposed connectors (including 3, 5, must be tightly covered with protective caps (an optional accessory) to ensure IP54-rated protection.

and 14) when not in use

Mounting Dimensions (unit = mm)

TN-5508A Series

- 6 -

+ 13 hidden pages