www.moxa.com
NPort 5100 Series
1-port RS-232/422/485 serial device servers
Features and Benefits
• Small size for easy installation
• Real COM/TTY drivers for Windows and Linux
• Standard TCP/IP interface and versatile operation modes
• Easy-to-use Windows utility for configuring multiple device servers
• SNMP MIB-II for network management
• Configure by Telnet, web browser, or Windows utility
• Adjustable pull high/low resistor for RS-485 ports
Certifications
Introduction
NPort® 5100 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for
connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort 5100 device servers to give your PC
software direct access to serial devices from anywhere on the network.
Most Cost-effective Serial-to-Ethernet Solution
Using serial device servers to connect legacy serial devices to Ethernet is now commonplace, and users expect device servers to be cost-effective
and to provide a broad selection of useful functions. With its full support of Microsoft and Linux operating systems and solid 5-year warranty, the
NPort® 5100 Series provides the best choice for serial-to-Ethernet converters.
Adjustable Termination and Pull High/Low Resistors
In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is
also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally
compatible with all environments, the NPort® 5100 device servers come with jumpers for adjusting termination and pull high/low resistor values for
each serial port.
Standard TCP/IP Interface and Broad Choice of Operation Modes
The NPort® 5100 device servers can be configured for TCP Server, TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode,
ensuring compatibility with software based on a standard network API (e.g., Winsock or BSD Sockets).
Real COM/TTY Drivers for Existing Software
The Real COM/TTY drivers provided with the NPort® 5100 device servers allow you to continue using software designed for communicating
through COM/TTY ports. Installation and configuration are painless, and allows your serial devices and PC to communicate seamlessly over a TCP/
IP network. Using Moxa’s Real COM/TTY drivers is an excellent way to preserve your software investment while still allowing you to enjoy the
benefits of networking your serial devices.
Easy to Troubleshoot
NPort® 5100 device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap
messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an email alert
can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be
triggered by a warm start, a cold start, or a change in password.
Specifications
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 1
Magnetic Isolation Protection 1.5 kV (built-in)
1
www.moxa.com
Ethernet Software Features
Configuration Options Web Console (HTTP), Serial Console (NPort 5110/5110-T/5150 only), Telnet Console,
Windows Utility
Management DHCP Client, IPv4, SNTP, SMTP, SNMPv1, Telnet, DNS, HTTP, ARP, BOOTP, UDP,
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64),
Linux Real TTY Drivers Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.
Android API Android 3.1.x and later
MIB RFC1213, RFC1317
TCP/IP, ICMP
Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP
Embedded
x, HP-UX 11i, Mac OS X
Serial Interface
Connector DB9 male
No. of Ports 1
Serial Standards NPort 5110/5110-T: RS-232
Operation Modes Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, TCP Client,
NPort 5130: RS-422, RS-485
NPort 5150: RS-232, RS-422, RS-485
TCP Server, UDP
Baudrate NPort 5110/5110-T: 110 bps to 230.4 kbps
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF
Pull High/Low Resistor for RS-485 NPort 5130/5150: 1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control NPort 5130/5150: ADDC® (automatic data direction control)
NPort 5130/5150: 50 bps to 921.6 kbps
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Power Parameters
Input Current NPort 5110/5110-T: 128 mA @ 12 VDC
NPort 5130/5150: 200 mA @ 12 VDC
Input Voltage 12 to 48 VDC
No. of Power Inputs 1
Source of Input Power Power input jack
2
www.moxa.com
Physical Characteristics
Housing Metal
Dimensions (with ears) 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
Dimensions (without ears) 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
Weight 340 g (0.75 lb)
Installation Desktop, DIN-rail mounting (with optional kit), Wall mounting
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Storage Temperature (package included) -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Standards and Certifications
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
Safety UL 60950-1
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
MTBF
Time NPort 5110/5110-T: 3,126,448 hrs
Standards Telcordia (Bellcore) Standard TR/SR
NPort 5130: 2,836,863 hrs
NPort 5150: 2,736,202 hrs
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty
Package Contents
Device 1 x NPort 5100 Series device server
Power Supply 1 x power adapter, suitable for your region (all models except NPort 5110-T)
Documentation 1 x quick installation guide
1 x warranty card
3
www.moxa.com
Dimensions
Ordering Information
Model Name Operating Temp. Baudrate Serial Standards Input Current Input Voltage
NPort 5110 0 to 55°C 110 bps to 230.4 kbps RS-232 128.7 mA @ 12 VDC 12-48 VDC
NPort 5110-T -40 to 75°C 110 bps to 230.4 kbps RS-232 128.7 mA @ 12 VDC 12-48 VDC
NPort 5130 0 to 55°C 50 bps to 921.6 kbps RS-422/485 200 mA @ 12 VDC 12-48 VDC
NPort 5150 0 to 55°C 50 bps to 921.6 kbps RS-232/422/485 200 mA @ 12 VDC 12-48 VDC
Accessories (sold separately)
Cables
CBL-F9M9-20 DB9 female to DB9 male serial cable, 20 cm
CBL-F9M9-150 DB9 female to DB9 male serial cable, 1.5 m
CBL-RJ458P-100 8-pin RJ45 CAT5 Ethernet cable, 1 m
CBL-RJ45SF9-150 8-pin RJ45 to DB25 male serial cable with shielding, 1.5m
Connectors
ADP-RJ458P-DB9F DB9 female to RJ45 connector
Mini DB9F-to-TB DB9 female to terminal block connector
DIN-Rail Mounting Kits
DK35A DIN-rail mounting kit, 35 mm
Power Adapters
PWR-12150-AU-SA-T Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Australia (AU) plug, -40 to 75°C operating
PWR-12150-CN-SA-T Wide-temperature (-40 to 75°C) locking barrel plug, 12 VDC, 1.5 A, 100 to 240 VAC, China (CN) plug
temperature
Applicable Models:
NPort 5110-T
Applicable Models:
4
www.moxa.com
NPort 5110-T
PWR-12150-EU-SA-T Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Continental Europe (EU) plug, -40 to 75°C operating
PWR-12150-UK-SA-T Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, United Kingdom (UK) plug, -40 to 75°C operating
PWR-12150-USJP-SA-T Locking barrel plug, 12 VDC 1.5 A, 100-240 VAC, United States/Japan (US/JP) plug, -40 to 75°C
PWR-12050-WPUK-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, United Kingdom (UK) plug, 0 to 40°C operating
PWR-12050-WPAU-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, Australia (AU) plug, 0 to 40°C operating
PWR-12050-WPCN-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100 to 240 VAC, China (CN) plug, 0 to 40°C operating
PWR-12050-WPUSJP-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, United States/Japan (US/JP) plug, 0 to 40°C
PWR-12050-WPEU-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, Continental Europe (EU) plug, 0 to 40°C
temperature
Applicable Models:
NPort 5110-T
temperature
Applicable Models:
NPort 5110-T
operating temperature
Applicable Models:
NPort 5110-T
temperature
temperature
temperature
operating temperature
operating temperature
Power Cords
CBL-PJ21NOPEN-BK-30 Locking barrel plug to bare-wire cable
© Moxa Inc. All rights reserved. Updated Dec 06, 2019.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
5
Loading...