• 8 IEEE 802.3af and IEEE 802.3at PoE+ standard ports
• 36-watt output per PoE+ port in high-power mode
• Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/
STP, and MSTP for network redundancy
• RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL,
HTTPS, SSH, and sticky MAC-addresses to enhance network security
• Security features based on IEC 62443
• EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device
management and monitoring
• Supports MXstudio for easy, visualized industrial network management
• V-ON™ ensures millisecond-level multicast data and video network recovery
Certifications
Introduction
The EDS-G512E Series is equipped with 12 Gigabit Ethernet ports and up to 4 fiber-optic ports, making it ideal for upgrading an existing network to
Gigabit speed or building a new full Gigabit backbone. It also comes with 8 10/100/1000BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant
Ethernet port options to connect high-bandwidth PoE devices. Gigabit transmission increases bandwidth for higher performance and transfers
large amounts of triple-play services across a network quickly.
Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, RSTP/STP, and MSTP increase the reliability of your system and improve the
availability of your network backbone. The EDS-G512E Series is designed specifically for communication demanding applications, such as video
and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable backbone construction.
Additional Features and Benefits
• Command line interface (CLI) for quickly configuring major
managed functions
• Advanced PoE management function (PoE port setting, PD failure
check, and PoE scheduling)
• DHCP Option 82 for IP address assignment with different policies
• Supports EtherNet/IP, PROFINET, and Modbus TCP protocols for
device management and monitoring
• IGMP snooping and GMRP for filtering multicast traffic
• Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
planning
• Supports the ABC-02-USB (Automatic Backup Configurator) for
system configuration backup/restore and firmware upgrade
• Port mirroring for online debugging
• QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism
• Port Trunking for optimum bandwidth utilization
• RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC
ACL, HTTPS, SSH, and sticky MAC address to enhance network
security
• SNMPv1/v2c/v3 for different levels of network management
• RMON for proactive and efficient network monitoring
• Bandwidth management to prevent unpredictable network status
• Lock port function for blocking unauthorized access based on MAC
address
• Automatic warning by exception through email and relay output
Specifications
Input/Output Interface
Alarm Contact Channels1, Relay output with current carrying capacity of 1 A @ 24 VDC
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for flow control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
IEEE 802.3ad for Port Trunk with LACP
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
7
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.