The AWK-1131A industrial wireless AP/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology
with a net data rate of up to 300 Mbps. The AWK-1131A is compliant with industrial standards and approvals covering operating temperature,
power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply. The AWK-1131A
can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless
investments.
Improved Higher Data Rate and Channel Capacity
• High-speed wireless connectivity with up to 300 Mbps data rate
• MIMO technology to improve the capability of transmitting and receiving multiple data streams
• Increased channel width with channel bonding technology
• Supports flexible channel selection to build up wireless communication system with DFS
Specifications for Industrial-grade Applications
• Redundant DC power inputs
• Integrated isolation design with enhanced protection against environmental interference
• Compact aluminum housing, IP30-rated
Specifications
WLAN Interface
WLAN Standards802.11a/b/g/n
Modulation TypeDSSS
802.11i Wireless Security
OFDM
MIMO-OFDM
Frequency Band for US (20 MHz operating channels)2.412 to 2.462 GHz (11 channels)
Frequency Band for EU (20 MHz operating channels)2.412 to 2.472 GHz (13 channels)
1.The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free
20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load.
Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
2.DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel.
However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)
5.745 to 5.825 GHz (5 channels)
5.180 to 5.240 GHz (4 channels)
1
2
2
www.moxa.com
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)
3
3
Frequency Band for JP (20 MHz operating channels)2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)
3
3
Wireless SecurityWEP encryption (64-bit and 128-bit)
Receiver Sensitivity for 802.11n (5 GHz; measured at
5.680 GHz)
3.DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel.
However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
4.Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.
LED IndicatorsPWR, FAULT, STATE, SIGNAL, WLAN, LAN
Input/Output Interface
ButtonsReset button
Physical Characteristics
HousingMetal
IP RatingIP30
5.Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.
3
www.moxa.com
Dimensions58 x 115 x 70 mm (2.29 x 4.53 x 2.76 in)
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
6
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.