Moxa EDS-G512E-8POE-4GSFP-T, EDS-G512E-8POE-4GSFP User Manual
P/N: 1802005120012
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll
Tel:
Fax:
Moxa China (Shanghai office):
Toll
Tel:
Fax:
Moxa Europe:
Tel:
Fax:
Moxa Asia-Pacific:
Tel:
Fax:
Moxa India:
Tel:
Fax:
2017 Moxa Inc. All rights reserved.
EDS-G512E-8PoE Series
Quick Installation Guide
Moxa EtherDevice™ Switch
Edition 2.1, July 2017
-free: 1-888-669-2872
1-714-528-6777
1-714-528-6778
+49-89-3 70 03 99-0
+49-89-3 70 03 99-99
+91-80-4172-9088
+91-80-4132-1045
-free: 800-820-5036
+86-21-5258-9955
+86-21-5258-5505
+886-2-8919-1230
+886-2-8919-1231
*1802005120012*
Package Checklist
The EDS-G512E-8PoE is shipped with the following items. If any of these
items are missing or damaged, please contact your customer service
representative for assistance.
• 1 EDS-G512E-8PoE-4GSFP or EDS-G512E-8PoE-4GSFP-T Ethernet
switch
• USB cable
• Protective caps for unused ports
• Documentation and software CD
• Quick installat ion guide (pr inted )
• Warranty card
Features
• Up to 8 10/100/1000BaseT(X) ports and 4 100/1000BaseSFP ports
• Up to 8 IEEE 802.3af and IEEE 802.3at PoE+ standard ports
36-watt output per PoE+ port in high-power mode
Intelligent PoE power management functions
• Operate with 240 watts full PoE+ loading at -40 to 75°C
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250
switches), RSTP/STP, and MSTP for network redundancy
• TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance
network security
• Easy network management by web browser, CLI, USB serial console,
ABC-02-USB, MXview, MXconfig, and Windows utility
- 2 -
Panel Views of EDS-G512E-8PoE Series
Front Panel
Front Panel
1.
2.
3.
4.
5.
6.
7.
8.
9.
PoE+
Top Panel
1.
2.
3.
4.
5.
6.
Rear
1.
2.
1000BaseT(X) LED indicator
10/100BaseT(X) LED indicator
Top Panel
10/100/1000BaseT(X) ports
Port 1 to 8
System status LED:
• STATE LED indicator
• PWR1 LED indicator
• PWR2 LED indicator
• FAULT LED indicator
• MSTR/HEAD LED indicator
• CPLR/TAIL LED indicator
USB storage port
SFP port LED indicator
Port 9 to 12
100/1000BaseSFP slots
Model Name
SmartPoE LED indicator of
ports
Reset button
USB console port
DIP switches for Turbo Ring,
Ring Master, and Ring Coupler
Grounding screw
4-pin ter minal block for digital
input and power input 2
4-pin ter minal block for relay
output and power input 1
Rear Panel
Panel
Screw holes for wall mounting
kit
DIN-rail mounting kit
- 3 -
Mounting Dimensions
Unit = mm (inch)
- 4 -
DIN-Rail Mounting
STEP 1—Insert the upper lip
of the DIN r
ail
mounting kit.
STEP 2
EDS
towards the
snaps into
STEP 1
on the mounting kit
screwdriver.
STEP 2
the
EDS
forward and lift up to remove
it from the DIN r
STEP 1—Remove the
aluminum DIN r
attachment plate from the
rear panel
EDS
and then attach
mount plates
screws
figure at the right.
The metal DIN-rail kit is fixed to the back panel of the EDS-G512E-8PoE
series when you take it out of the box. Mount the EDS-G512E-8PoE series
on corrosion-free mounting rails that meet the EN 60715 standard.
Installation
ail into the DIN-r
—Press the
-G512E-8PoE series
DIN rail until it
place.
Removal
—Pull down the latch
& 3—Slightly pull
-G512E-8PoE series
with a
ail.
Wall Mounting (Optional)
For some applications, you will find it convenient to mount Moxa EDSG500E series on the wall, as shown in the following illustrations:
-G512E-8PoE series,
, as shown in the
of the
with M3
ail
the wall
- 5 -
Loading...