8-port entry-level unmanaged Ethernet switches with metal housing
Features and Benefits
• 10/100BaseT(X) (RJ45 connector)
• Compact size for easy installation
• QoS supported to process critical data in heavy traffic
• IP40-rated metal housing
• -40 to 75°C wide operating temperature range (-T models)
Certifications
Introduction
The EDS-2008-EL series of industrial Ethernet switches have up to eight 10/100M copper ports, which are ideal for applications that require simple
industrial Ethernet connections. To provide greater versatility for use with applications from different industries, the EDS-2008-EL Series also
allows users to enable or disable the Quality of Service (QoS) function, and broadcast storm protection (BSP) with DIP switches on the outer panel.
In addition, the EDS-2008-EL Series has a rugged metal housing to ensure suitability for use in industrial environments and fiber connections
(Multi-mode SC or ST) can also be selected.
The EDS-2008-EL Series has a 12/24/48 VDC single power input, DIN-rail mounting, and high-level EMI/EMC capability. In addition to its compact
size, the EDS-2008-EL Series has passed a 100% burn-in test to ensure it will function reliably after it has been deployed. The EDS-2008-EL Series
has a standard operating temperature range of -10 to 60°C with wide-temperature (-40 to 75°C) models also available.
100BaseFX Ports (multi-mode ST connector)EDS-2008-EL-M-ST: 1
StandardsIEEE 802.3 for 10BaseT
EDS-2008-EL-M-ST: 7
EDS-2008-EL-M-SC: 7
Full/Half duplex mode
Auto MDI/MDI-X connection
Auto negotiation speed
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for flow control
IEEE 802.1p for Class of Service
Optical Fiber
100BaseFX
Multi-ModeSingle-Mode
Fiber Cable TypeOM1
Typical Distance4 km5 km40 km
WavelengthTypical (nm)13001310
1
50/125 µm
G.652
800 MHz x km
Page 2
www.moxa.com
100BaseFX
Multi-ModeSingle-Mode
Fiber Cable TypeOM1
Optical Power
Note: When connecting a single-mode fiber transceiver, we recommend using an
attenuator to prevent damage caused by excessive optical power.
Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link
budget (dB) > dispersion penalty (dB) + total link loss (dB).
Switch Properties
Processing TypeStore and Forward
MAC Table Size8 K
Packet Buffer Size4 Mbits
50/125 µm
800 MHz x km
TX Range (nm)1260 to 13601280 to 1340
RX Range (nm)1100 to 16001100 to 1600
TX Range (dBm)-10 to -200 to -5
RX Range (dBm)-3 to -32-3 to -34
Link Budget (dB)1229
Dispersion Penalty
(dB)
31
G.652
DIP Switch Configuration
Ethernet InterfaceQuality of Service (QoS), Broadcast Storm Protection (BSP)
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
6
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.