
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll
Tel:
Fax:
Moxa China (Shanghai office):
Toll
Tel:
Fax:
Moxa Asia-Pacific:
Tel:
Fax:
2019 Moxa Inc. All rights reserved.
ABC-01
Quick Installation Guide
Moxa Automatic Backup Configurator
Edition 2.0, June 2019
-free: 1-888-669-2872
1-714-528-6777
1-714-528-6778
+49-89-3 70 03 99-0
+49-89-3 70 03 99-99
+91-80-4172-9088
+91-80-4132-1045
-free: 800-820-5036
+86-21-5258-9955
+86-21-5258-5505
+886-2-8919-1230
+886-2-8919-1231
*1802000010011*

Overview
The ABC-01 Automatic Backup Configurator is a device that can save and
load the configuration of a MOXA EDS-series managed switch via the
switch’s RS-232 console port. The ABC-01 thus makes it easier to manage
the backup of system parameters or replacement of a switch. With the
assistance of the ABC-01, users can quickly re-install a substitute switch
(of the same model) and/or recover the entire system configuration,
including IP address, if a switch failure occurs.
Package Checklist
Moxa ABC-01 is shipped with the following ite ms. If any of these items is
missing or damaged, please contact your customer service
representative for assistance.
• 1 x ABC-01
• Quick installation guide
• Warranty card
Features
• RS-232 RJ45 console port connection
• Comp lete configuration storage including IP address for one switch
• Automatic loading of system configuration after system reboot
• Manual loading and saving of system configuration through web
console
• Portable low-power design that requires no power supply
• CE, FCC approval
Hardware Description
- 2 -

Product Installation
For further details on ABC-01 operation through the switch’s web
console, please refer to the user’s manual for the switch.
The status of the ABC-01 may be checked on the switch’s web
console or by observing the
sequentially and c ircularly
FAULT, MASTER, COUPLER LEDs light
off
FAULT LED light on, MASTER and
COUPLE LEDs light off
The ABC-01 is designed solely for use with an RS-232 port. Plug the
ABC-01 into the RS-232 console port of your Moxa EDS managed switch.
Refer to the Product Operation section for instructions on how to save and
load the configuration.
Product Operation
Save the switch’s configuration on the ABC-01
Use the switch’s web console to save the switches configuration to the
ABC-01. The function is found under “Basic Settings/System File
Upgrade/Backup Media” in the web console.
Load the configuration from the ABC-01 to the switch
There are 2 ways to load the configuration from the ABC-01 to a Moxa
EDS-series managed switch:
1. Load Automatically
When the ABC-01 is plugged in, the switch will automatically load the
configuration from the ABC-01 after the switch reboots. This function can
be disabled through the web console under “Basic Settings/System File
Upgrade/Backup Media”, or through the telnet console under “Basic
Settings/Backup Media”.
2. Load Manually
When the ABC-01 is plugged in, the configuration can be loaded manually
through the switch’s web console under “Basic Settings/System File
Upgrade/Backup Media”.
switch’s front panel LEDs.
Save/Load in progress FAULT, MASTER, COUPLER LEDs blink
- 3 -

Specifications
3 to 5 VDC, power input via RS-232 RTS
35 cm, including connectors
-20 to 70°C (-4 to 158°F)
Ambient Relative
Humidity
5 % to 95 % (non-condensing)
FCC Part 15, CISPR (EN55032) Class A
EN61000-4-2 (ESD), level 3
EN61000-4-6 (CS), level 3
via Moxa EDS managed switch’s web
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
- 4 -