MovinCool CLASSIC40, CLASSICPLUS26 User Manual

www.movincool.com

S.908

MovinCool—Pioneering Spot Air Conditioners Since 1982

Welcome to MovinCool, your solution for quality portable and ceiling-mount spot air conditioners. Ever since developing the original spot air conditioner in 1982, MovinCool has been redefining the industry and introducing innovative, cost-effective cooling solutions to you. From the Classic, Classic Plus and Office Pro® Series to the latest Ceiling-Mount Series, MovinCool is dedicated to being the best cooling solution for your heat-management needs.

MovinCool was established to develop portable spot air conditioning systems for its parent company, DENSO Corporation. A leading component supplier to virtually all of the world’s major automotive manufacturers—including Chrysler, Ford, GM, Honda and Toyota—DENSO employs 130,000 people in 38 countries throughout the world.

Today, as manufacturing, telecom, computer and office-equipment demands evolve at record speed, MovinCool spot air conditioners are keeping pace. Delivering cooling solutions that are more versatile, more efficient and more cost-effective than ever before.

To meet our stringent MovinCool qualitycontrol standards, we require that every unit we sell pass a demanding battery of performance tests. Then we back each one with the strongest, most comprehensive warranty in the industry.

E.256

TANK FULL

FAN MODE

HI/LO

COOL MODE

ON/OFF

E.256

PROGRAM

RUN/ STOP

PROGRAMMING

SET

PROG

SET

CLOCK

SET TEMP

ENTER

Office Pro

The first MovinCool portable spot air conditioners were so effective in DENSO factories and plants that the company decided to make them available commercially. Filling a critical need for spot cooling, MovinCool units were soon being put to effective use in a wide array of demanding manufacturing environments throughout North America.

OFFICE PRO® SERIES

The Office Pro® is designed to function in today’s information critical office environments. Its modern styling allows it to blend with most interiors yet it offers the same cooling power as our Classic industrial models. By cooling down to 65° F, the Office Pro® Series is ideal for cooling electronic equipment.

With programmable electronic temperature control, the Office Pro® is affordable insurance when the fixed air conditioning system is no longer sufficient or completely fails. The Office Pro® cools people and electronic equipment instantly, quietly, and efficiently.

For spaces where hot air cannot be exhausted, we now offer a 1.5 ton, 115V water-cooled model.

OFFICE PRO®

Key Features

Air or Water-Cooled Models Available

24/7 Programmable Operating Modes

Digital Temperature Control

Provides Cooling in the Mid-60’s ° F

No Costly Installation Necessary

Where It’s Used

Server & Telecom Rooms

Hospitals

Laboratories

Offices

Schools

Banks

Emergency Back-up

Supplemental Cooling

After-hours Cooling

MOVINCOOL OFFICE PRO® SERIES

OFFICE PRO® SERIES

MovinCool Technical Specifications

Office Pro® 12 Office Pro® 18 Office Pro

Electronic Features

Cooling Capacity

Electrical Characteristics

Fans

Evaporator

Condenser

Compressor

Control Programmable Programmable Programmable Programmable Programmable Programmable Programmable

Rating conditions: 95° F at 60% RH 12,000 Btu/h 16,800 Btu/h 15,700 Btu/h

Voltage Requirement 1 Phase, 115V 1 Phase, 115V 1 Phase, 115V 1 Phase, 208/230V 1 Phase, 208/230V 1 Phase, 208/230V 3 Phase, 460V

Total Power Consumption 1.3 kW 1.7 kW 1.27 kW 2.9 kW 4.3 kW 6.6 kW 6.6 kW

Current Consumption 11.9 amps 15.6 amps 11.7 amps 13.2 amps 19.6 amps 29 amps 9.5 amps

Recommended Fuse Size 15 amps 20 amps 15 amps 20 amps 30 amps 50 amps 20 amps

NEMA Plug Configuration 5 – 15 5 – 20 5 – 15 6 – 20 6 – 30 6 – 50 L16 – 20

Min. – Max. Voltage 105 – 125 105 – 125 105 – 125 198 – 250 198 – 250 198 – 250 440 – 480

Motor Output – high/low 0.14/0.08 kW 0.24/0.17 kW 0.11/0.08 kW 0.57/0.40 kW

Fan Type Centrifugal Centrifugal Centrifugal Centrifugal Centrifugal Centrifugal Centrifugal

Max. Air Flow – high/low 410/380 CFM 540/500 CFM 565/540 CFM 630/545 CFM 990/825 CFM 1940/1770 CFM 1940/1770 CFM

Max. External Static Pressure 0.31 IWG 0.31 IWG 0.31 IWG 0.5 IWG 0.6 IWG 0.9 IWG 0.9 IWG

Fan Type Centrifugal Centrifugal Water Cool Condenser Centrifugal Centrifugal Centrifugal Centrifugal

Max. Air Flow – high/low 820/715 CFM 770/710 CFM N/A 870/760 CFM 1490/1060 CFM 2830/2650 CFM 2830/2650 CFM

Max. External Static Pressure 0.16 IWG 0.23 IWG N/A 0.16 IWG 0.5 IWG 0.85 IWG 0.85 IWG

Type Hermetic Rotary Hermetic Rotary Hermetic Rotary Hermetic Rotary Hermetic Scroll Hermetic Scroll Hermetic Scroll

Output 0.9 kW 1.16 kW 1.16 kW 1.8 kW 2.3 kW 3.9 kW 3.3 kW

Refrigerant

Dimensions

Net Weight/Shipping Weight

Power Cord

Condensate Tank Capacity

Operating Conditions

Max. Equivalent Duct Length

Max. Sound Level

MOVINCOOL OFFICE PRO® SERIES

Type R-410A R-410A R-410A R-410A R-410A R-410A R-410A

W x D x H 21 x 27 x 44 in 21 x 27 x 44 in 21 x 27 x 41.5 in 21 x 27 x 49 in 30 x 40 x 52 in 30 x 52 x 65 in 30 x 52 x 65 in

151/182 lb 170/201 lb 178/209 lb 216/253 lb 432/509 lb 623/753 lb 705/835 lb

Gauge 14 AWG (3-core) 12 AWG (3-core) 14 AWG (3-core) 12 AWG (3-core) 12 AWG (3-core) 6 AWG (3-core) 12 AWG (4-core)

Length 10 ft 10 ft 10 ft 6 ft 6 ft 6 ft 6 ft

5 gal 5 gal 5 gal 5 gal 2 @ 5 gal Auto Pump Included Auto Pump Included

Min. – Max. (@ 50% RH) 65° – 95° F 65° – 95° F

Per Cold Duct Hose 30 ft 25 ft 25 ft 50 ft 40 ft 40 ft 40 ft

Hot Duct Hose 60 ft 100 ft N/A 45 ft 60 ft 100 ft 100 ft

With Condenser Duct – high/low 52/50 dB(A) 61/59 dB(A) N/A 63/61 dB(A) 65/62 dB(A) 69/67 dB(A) 69/67 dB(A)

Without Condenser Duct – high/low 55/53 dB(A) 62/60 dB(A) 62/60 dB(A) 65/63 dB(A) 67/66 dB(A) 71/69 dB(A) 71/69 dB(A)

All specifications subject to change without notice. Standard warranty includes 12 months on entire unit and compressor. Visit www.MovinCool.com/reg for details on MovinCool’s industry-best free Extended Warranty Program which includes 3 years for portable models and 2 years for ceiling-mount models for both parts and labor on units. All models feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle pro tection, return air thermostat, automatic restart and accommodate a condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance decrease from specifications listed above (except CM25 and CMW30).

Water-Cooled

OFFICE PRO®

W20 Office Pro® 24

(1)

24,000 Btu/h 36,000 Btu/h 60,000 Btu/h 60,000 Btu/h

Office Pro® 36

0.21/0.13 kW Evap. 0.5/0.33 kW Evap. 0.5/0.33 kW Evap.

0.33/0.12 kW Cond. 1.2/0.93 kW Cond. 1.2/0.93 kW Cond.

Office Pro® 60

Office Pro® 63

65° – 95° F

40° – 90° F (Condenser water)

* Specification information shown with 230V

(1)

Rating Conditions: Air: 80° F at 50% RH / Water (EWT/LWT): 85°F/95° F

65° – 95° F 65° – 95° F 65° – 105° F 65° – 105° F

MOVINCOOL OFFICE PRO® SERIES

OFFICE PRO® SERIES

Spot Cooling Solutions with MovinCool Accessories

The all-in-one design of MovinCool air conditioners make them the ideal cooling solution for virtually any heat-related problem. Using the optional accessories not only gives you the ability to customize the cooling application, but also makes the unit work more efficiently. In this catalog, we’ve grouped the accessories into the most common applications such as cooling multiple areas with one unit, automatically removing condensation and removing condenser heat. The possibilities are endless. And with genuine MovinCool accessories, you are assured of quality parts engineered and designed specifically to gain optimum performance from your MovinCool spot air conditioner.

How to Select MovinCool Accessories

The most common accessory installations are included in this catalog.

Find your MovinCool model category:

Ceiling-Mount, Office Pro®, Classic Plus, or Classic.

Find the application(s) suited to your

specific need.

Order the part number(s) for your specific

MovinCool model.

PROGRAM

RUN/

STOP

PROGRAMMING

SET PROG

TANK FULL

FAN MODE

HI/LO

SET

CLOCK

COOL MODE

SET TEMP

ON/OFF

ENTER

Office Pro

Individual Part Descriptions

For MovinCool Office Pro® Series

1 Nozzle Adapter Kit Two-piece metal frame converts airflow from louvers to nozzles or cold air ducts.

Includes mounting screws. (Nozzles and ducts sold separately)

1A Duct Adapter Kit

(Not shown)

2 Nozzle Kit 5" or 6" diameter white plastic nozzle that extends up to 2’ in length.

3 Cold Air Flange Kit 5" or 6" diameter white metal flange with wire clamp and mounting screws.

4 Cold Air Self-Supported Duct 5", 6" or 8" adjustable diameter, white polypropylene duct that extends

4A Cold Air Flexible Duct

(Not shown)

5 Trim Ring 5" or 6" diameter black end-cap for cold air self-supported duct.

6 Warm Air Self-Supported Duct 12" diameter white, polypropylene plastic duct that extends 6-½’ to 10’ in

7 Ceiling Tile 24" x 24" white tile with 12" hole for warm air self-supported duct.

8 Condenser Air Plenum White plastic plenum for return air to condenser. Hinged for filter cleaning.

9 Condensate Pump Kit 110V or 220V pump kit includes /" diameter x 20’ length clear vinyl hose

10 Condensate Tank Drain tank storage for condensation. Requires condensate float, sold separately.

10A Condensate Float (Not shown) Controls water level in condensate tanks. (For Office Pro® 60/63 only)

11 Evaporator Air Plenum White plastic plenum for return air to evaporator. (For Office Pro® 60/63 only)

12 Warm Air Flexible Duct Kit 12" diameter wire-reinforced, accordion-style duct in 10’ lengths for condenser

13 Hose Kit Two 25’ hoses for condenser water supply and return.

Same as above, but for use with cold air flexible ducts. Includes flange. Use on Office Pro® 36 or 60/63 only. (Cold air flexible ducts sold separately)

Includes flange, mounting screws and trim ring. (Sold individually)

Use with cold air ducts.

from 6-½’ to 10’ in length.

8" diameter wire-reinforced, accordion-style duct in 25’ lengths. (For Office Pro® 36 & 60/63 only)

length. (N/A for Office Pro® 36 exhaust and entire Office Pro® 60/63)

(24" x 24" sheet metal tile with 16" hole and built-in flange and tie-strap for Office Pro® 36 exhaust and entire Office Pro® 60/63)

and installation hardware.

(For Office Pro® 60/63 only)

exhaust. Includes clamp. Duct is 16" in diameter and 25’ in length for Office Pro® 36 exhaust and entire Office Pro® 60/63 only.

(For Office Pro® W20 only)

MOVINCOOL OFFICE PRO® SERIES

+ 14 hidden pages