Page 1
Typical input and output connections
System Block Diagram
Fast Ethernet (100MBps) Network
Stereo Mix Output (balanced) for
listening to individual monitor mix via
In-Ear system
or
amplifier and passive
monitor speakers
Headphone
or In-Ear
2 Mono or 1 Stereo Input
Mic/Line (balanced) for
microphones, instruments,
modelers, keyboards, e-drums and
submixers
or
or
powered monitor
speaker
Typical in and output options for myMix.
Inputs plugged into one myMix unit are available on all other myMix
units via the network. Outputs are the individual monitor mixes,
available on 3,5mm headphone or balanced line outputs.
Fast Ethernet Network (CAT5 cabling)
Mic or Line Signal
Stereo Mix Output
MIC
PRE
LINE
OUT
myMix
A/D
D/A
NETWORK INTER FA CE
Sending 2 local Input Signals
Receiving other Input signals
16 in 2 mixer with
built in FX
16 + 2 track recording, 24-bit
or
or
myMix Block Diagram - the two local input signals are converted and
sent to the network, while the signals from the other myMix units are
received from the network. Up to 16 signals can be recorded as
multitrack plus the mixed stereo monitor signal.
2010 MOVEK LLC
Page 2
Application Band Rehearsal
Selfcontained system for 5 musicians with
individual mixes for up to 10 inputs
Joe- Guitar: uses a mic to pick up the guitar amplifier, the second input
is for Nicks mic. The outputs are connected to a power amplifier to drive
a pair of monitor speakers.
Nick- Keyboards and backing vocals. Keyboards connected to myMix
(Stereo), vocal mic connected to free input on Joe‘s myMix. Nick listens
through his wired in-ears.
Steve- Bass and backing vocals. Bass is connected direct from the
amplifier line out to myMix. Steve uses headphones to listen.
Lisa- Lead Vocals. Connects her vocal mic to myMix, the second input is
for Greg‘s click track. She is listening through wired in-ears.
Greg- Drums. Greg is using one mic for kick drum and one overhead mic
for snare, hihat and cymbals in the rehearsal room. He uses a
headphone for listening.
Conventional Fast Ethernet (100MBps) switch with 5 ports to connect
to all myMix units via a CAT5 cable.
2010 MOVEK LLC
Page 3
Application Club Gig - stage mixing
Selfcontained system for 5 musicians with
individual mixes plus main PA mix
Joe- Guitar: uses a mic to pick up the guitar amplifier. myMix outputs
are connected to an in-ear system or a monitor speaker.
Nick- Keyboards and backing vocals. Keyboards connected to myMix
(Stereo), vocal mic connected to free input on Joe‘s myMix. Nick is
listening through an in-ear system or a monitor speaker.
or
or
Steve- Bass and backing vocals. Bass connects from line out to myMix.
Steve is using an in-ear system or a monitor speaker for listening.
Lisa- Lead Vocals. Connects the receiver of her wireless mic to myMix
and uses the second input for Greg‘s click track. She is listening through
her wireless in-ear system.
Greg- Drums. Greg is using a submixer for his drum kit. He uses an in-ear
system or a monitor speaker for listening. All 6 myMix units are
connected to a Fast Ethernet (100MBps) switch.
or
or
An additional myMix is used to create the mix for the main PA speaker
system. A mic for announcements and a file player for background
music are connected to the inputs.
2010 MOVEK LLC
Page 4
Application Concert with FOH console
5 musicians with individual mixes
Drum submix at FOH console
Joe- Guitar: the guitar mic is plug into a splitter, which provides the
signal for FOH and monitors . Nick‘s vocal mic is also connetced to the
myMix. Joe is listening through a powered monitor speaker.
Nick- Keyboards and backing vocals. Keyboards connected to a pair of DI
boxes, the DI outputs connect to FOH, and the pass- through to the
myMix. Nick is listening through an in-ear system.
Steve- Bass and backing vocals. Bass connects from line out to DI box; DI
out for FOH, pass-through to myMix. His vocal mic connects to a splitter
for FOH and monitors. Steve is using an in-ear system.
Lisa- Lead Vocals. Connects the receiver of her wireless mic to a splitter
for FOH and monitors. The second input is for Greg‘s click track
(monitors only). She is listening through her wireless in-ear system.
Greg- Drums. All drum mics go straight to FOH. A stereo or dual mono
drum submix is returned to stage for monitoring in myMix. All myMix
connect to a Fast Ethernet swicth.
FOH console multicore
FOH: receives all input signals independent from myMix. A two channel
submix (e.g. 1: kick, 2: snare, HH, toms) is returned to stage for
monitoring through myMix. Talkback to stage through same feed.
2010 MOVEK LLC
Loading...