Mountain Buggy swift carrycot, urban jungle carrycot, duo single carrycot, duo twin carrycot Instructions Manual

English

1

Congratulations on your purchase of a Mountain Buggy carrycot.

We know how precious and inspiring a new little person can be in your world. It’s so
important to be able to show your baby to the world and just as important to show the
world to your baby.

At Mountain Buggy you and your baby matter to us. That’s why we have spent years
researching and developing a product that is safe, comfortable and in tune with
modern parents needs. We want you to be able to live your new family lifestyle with all
the freedom and satisfaction you have always experienced.

We also know that many parents use strollers incorrectly and as a result may put
their children at risk. Please take the time to read through this manual carefully. Your
Mountain Buggy carrycot will provide you with optimum safety if you follow the
instructions as detailed.

If you have any concerns, questions or comments about your Mountain Buggy carrycot
or how to use it, please do not hesitate to contact us. We’d love to hear from you.

Fitting a carrycot to your buggy is simple. However, it is important to follow the correct
instructions.

Welcome

2

Important:

Please read instructions carefully, follow them strictly and keep these instructions for

future reference. Your child’s safety is your responsibility and may be compromised if you
do not follow these instructions.

Warning

• Carrycot is suitable for newborns through to 6 months old, or until baby can sit up
unaided.

• Baby must not be in Carrycot when it is being fastened or removed from the stroller
frame.

• Depth from top of mattress to top of side of Carrycot at any position within 300mm/11.8in
from harness attachment points, should not be reduced to less than 150mm/5.5in when
mattress is in position. Mattresses purchased separately should conform to BS 1877 part

10.

• Do not add a mattress thicker than 25mm.

• Check snap locks are closed and rmly attached to frame so Carrycot will not tip or fall.

• Check Carrycot is horizontal and located correctly onto stroller frame. Refer back to

diagrams for your model to ensure positioning of snap locks is correct.

• Do not use Carrycot if you are unable to secure it to stroller frame. In this case contact
store where stroller was purchased for more help.

• Check that Carrycot attachment devices are correctly engaged before use.

• Always remove Carrycot before folding stroller.

For

the sake oF your precious passenger, please read these

warnings beFore using your Mountain buggy carrycot.

English

3

Removing the Sunhood

1. Standing beside your stroller and using a

reasonable degree of force, pull the sunhood
support wire towards you (by about 50mm/2in).

2. Remove support wire W from sunhood bush J on

the side nearest to you.

3. Unfasten sunhood domes that

attach the sunhood to stroller
frame and to stroller seat back.

Removing the Seat

1. Unfasten domes on seat that attach to frame.

2. Urban (Jungle) Only: unfasten strap

underneath seat at point A.

3. Terrain Only: remove seat support wire from

stroller frame at C and D. Push seat forward,
then slide fabric o seat
support wire.

W

J

C D

Before you can attach the Carrycot to your stroller you will need to remove the fabric
sunhood and seat on your stroller.

Preparing your stroller to fit the Carrycot

A