Mountain Buggy Strollers User Manual
Mountain Buggy Carrycot
P
A
S
S
E
D
S
A
F
E
T
Y
Instruction Manual
P
P
A
A
S
S
S
S
E
E
D
D
S
S
Y
Y
A
A
T
T
F
F
E
E
This manual covers all carrycot attachments – single, double and twin options.
Carrycots t onto the following Mountain Buggy® models:
English 1-10
Designed and made in New Zealand by Mountain Buggy Ltd. Manufactured by Tritec Manufacturing Ltd,
an ISO 9001 certi ed company. Models made to BS 7409:1996, AS/NZS 2088:2000.
Français 11-20
Conçu et fabriqué en Nouvelle-Zélande par Mountain Buggy Ltd. Fabriqué par Tritec Manufacturing Ltd,
une société certi ée ISO 9001. Modèles conformes à la BS 7409:1996, AS/NZS 2088:2000.
Deutsch 21-30
Entwickelt und hergestellt in Neuseeland durch Mountain Buggy Ltd und produziert von Tritec
Manufacturing Ltd., einem nach ISO 9001 zerti zierten Unternehmen. Modelle nach BS 7409:1996, AS/NZS
2088:2000.
Italiano 31-40
Ideato e fatto in Nuova Zelanda da Mountain Buggy Ltd. Prodotto da Tritec Manufacturing Ltd, una ditta
certi cata con ISO 9001. Modelli sono conformi alla BS 7409:1996, AS/NZS 2088:2000.
Español 41-50
Proyectado y fabricado en Nueva Zelanda por Mountain Buggy Ltd. Producido por Tritec Manufacturing Ltd,
una empresa certi cada con ISO 9001. Modelos se conforman a la BS 7409:1996, AS/NZS 2088:2000.
Nederlands 51-60
Ontworpen en gefabriceerd in Nieuw Zeeland door Mountain Buggy Ltd en geproduceerd door Tritec
Manufacturing Ltd. een ISO 9001 gecerti ceerde onderneming. Modellen gemaakt volgens de BS 7409:1996,
AS/NZS 2088:2000.
Svenska 61-70
Design och framställning i Nya Zeeland av Mountain Buggy Ltd. Tillverkad av Tritec Manufacturing Ltd, ett
företag met ISO 9001 certi kat. Modeller ar tillverkade enligt BS 7409:1996, AS/NZS 2088:2000.
Welcome
Congratulations on your purchase of a Mountain Buggy carrycot.
We know how precious and inspiring a new little person can be in your world. It’s so
important to be able to show your baby to the world and just as important to show the
world to your baby.
At Mountain Buggy you and your baby matter to us. That’s why we have spent years
researching and developing a product that is safe, comfortable and in tune with
modern parents needs. We want you to be able to live your new family lifestyle with all
the freedom and satisfaction you have always experienced.
We also know that many parents use strollers incorrectly and as a result may put
their children at risk. Please take the time to read through this manual carefully. Your
Mountain Buggy carrycot will provide you with optimum safety if you follow the
instructions as detailed.
1
ENGLISH
If you have any concerns, questions or comments about your Mountain Buggy carrycot
or how to use it, please do not hesitate to contact us. We’d love to hear from you.
Fitting a carrycot to your buggy is simple. However, it is important to follow the correct
instructions.
2
For the sake of your precious passenger, please
read these warnings before using your Mountain
Buggy Carrycot.
Important:
Please read instructions carefully, follow them strictly and keep these instructions for
future reference. Your child’s safety is your responsibility and may be compromised if you
do not follow these instructions.
Warning
• Carrycot is suitable for newborns through to 6 months old, or until baby can sit up
unaided.
• Baby must not be in Carrycot when it is being fastened or removed from the stroller
frame.
• Depth from top of mattress to top of side of Carrycot at any position within 300mm/11.8in
from harness attachment points, should not be reduced to less than 150mm/5.5in when
mattress is in position. Mattresses purchased separately should conform to BS 1877 part
10.
• Do not add a mattress thicker than 25mm.
• Check snap locks are closed and rmly attached to frame so Carrycot will not tip or fall.
• Check Carrycot is horizontal and located correctly onto stroller frame. Refer back to
diagrams for your model to ensure positioning of snap locks is correct.
• Do not use Carrycot if you are unable to secure it to stroller frame. In this case contact
store where stroller was purchased for more help.
• Check that Carrycot attachment devices are correctly engaged before use.
• Always remove Carrycot before folding stroller.
Preparing your Stroller to fi t the Carrycot
Before you can attach the Carrycot to your stroller you will need to remove the fabric
sunhood and seat on your stroller.
Removing the Sunhood
1. Standing beside your stroller and using a
reasonable degree of force, pull the sunhood
support wire towards you (by about 50mm/2in).
2. Remove support wire W from sunhood bush J on
the side nearest to you.
3. Unfasten sunhood domes that
attach the sunhood to stroller
frame and to stroller seat back.
3
ENGLISH
Removing the Seat
1. Unfasten domes on seat that attach to frame.
2. Urban (Jungle) Only: unfasten strap
underneath seat at point A.
3. Terrain Only: remove seat support wire from
stroller frame at C and D. Push seat forward,
then slide fabric o seat
support wire.
W
J
A
CD
Loading...