Motus M-FUSION Owner's Manual
OWNER’S MANUAL
MODEL
DESCRIPTION
INCLUDES
ALL RIGHTS RESERVED; COPYRIGHT® MOTUS USA 2008
: M-FUSION
: Motus® Fusion Group Indoor Racing Bike
: Motus® M-Racing PC; Dual SPD & Cage Pedals & CHR
1
Dear Motus USA Customer,
We would like to thank you for buying our studio sports training equipment ,hope
that it affords you the desired satisfaction. Please note and follow the information
and instructions for assembly and use. If you have any questions, please contact at
any time.
SAFETY INSTRUCTIONS
Before you start training on your sports training equipment, please read the
instructions carefully.
Be sure to keep the instructions and any other accompanying in case of repair and
for spare parts delivery.
z Use only original parts as delivered.
z Check before the equipment is first used, and again at regular intervals, that all
screws, bolts, nuts and other connections have been done up tightly, to ensure
that your training equipment is in a safe operating condition at all items.
z Place the bike on an even, non-slippery surface. Because of possible corrosion,
the usage of the bike in moist areas is not recommended.
z Check every 1-2 month that all connecting elements are tight fitting and are in
the correct condition.
z Only carry out training work on the equipment when it is in perfect working
order.
z One person for training may only use the equipment.
z The bike is designed for adult. Children are not allowed to use this bike.
z Always pay attention that you or any other persons never bring parts of the
body in close proximity to any parts of the equipment that are still moving.
z Consult your physician before starting with any exercise program. He can
advise which kind of training and impact is suitable.
z When making settings for any adjustable parts, check that they are in the right
position and also check the marked maximum setting.
z Please follow the advice for correct training as detail in training instructions.
z This bike not suits for therapeutic use.
z The user’s max. Weight in 120 KGS.
2
Basic Maintenance and Pre-us Suggestions and Requirements:
- Lubricant is recommended as a Silicone Spray (Do Not Use WD-40). Lubricate
seat neck and display neck if adjustment becomes difficult.
- Flywheel should be thoroughly cleaned prior to; and port workout. This will
prevent build up on flywheel as-well as limit rough operation of the unit.
- Check foot mounts to ensure they are adjusted accordingly.
- Check Resistance to ensure that all bikes have matching tension.
- Adjust Resistance to desired preference.
- Always keep bikes clean and wipe down after use, for improved product
longevity.
PARTS LIST
:
Item Description Quantity Item Description Quantity
1
Main Frame
2
Rear Foot Bar
3
Front Foot Bar
4
U-Zone Bar
5
Seat Post
6
Handle Post
7
Seat Slider
8
Handle Bar
9
End Cap
10
Adjustable Pad
11
Move Wheel
12
Hex Head Bolt
1 39
1 40
1 41
1 42
1 43
1 44
1 45
1 46
2 47
2 48
2 49
2 50
Nut
Adjustable Bolt
Lock Nut
Function Set
Stopper Set
Function Controller
Screw
Inner Chain Cover
Screw
Belt
Belt Deck
Screw
3
2
2
2
2
1
1
2
1
2
1
1
4
Loading...