Motus M90T User Manual

MOTUS M90T SERIES

USER MANUAL

M90T

www.motus.co.kr

4 MOTUS

M90T SERIES

Introduction

Ⅰ. IMPORTANT SAFETY INSTRUCTIONS

Safety Warnings & Precautions

Read all instructions using the treadmill to ensure your safety. Make sure that all users read
and understand this manual.

DANGER

WARNING

To reduce the risk of burns, fire, electric shock, or injury.

●

Connect each treadmill to a properly grounded electrical outlet.

●

Never leave the treadmill unattended. Unplug the treadmill from the power outlet when it
is not in use, before cleaning it, and putting on or taking off parts.

●

Do not place blanket on the treadmill. Never operate the treadmill with the air openings
blocked. Keep air openings free of lint, hair, or obstructing material.

●

Use the treadmill only for its intended use as described in this manual. Do not attach
accessories that are not recommended by Motus. lt can cause an accident.

●

Stop using the treadmill and contact your dealer for repair, if the product is wet, if it is not
working properly, if it has a damaged cord or plug or if it has been dropped or damaged.

●

Do not plug the treadmill by the power cord or use the cord as a handle.

●

Never drop or insert objects into any opening in the treadmill lf an object is dropped
inside, turn off the power and unplug the power cord from the outlet. lf the object cannot
be retrieved, contact your dealer.

●

Do not operate where aerosol spray products are being used or where oxygen is being
administrated. Such substances create the danger of combustion and explosion.

●

To disconnect, turn all controls to the off position then remove plug from outlet.

●

Intermittent and improper lubrication by manual operation not only reduces the expected
life span of product but also might be the cause of the accident. Make sure to completely
lubricate periodically.

●

Do not stand on the display console or motor hood.

●

Never perform the striding belt alignment or tension adjustment while you or other person
are standing on the striding belt.

●

Never let your hands or your body touch the striding belt directly when the treadmill is in
operation, except for purpose of exercise.

To reduce the risk of electric shock, always unplug the treadmill from the electric outlet
immediately after using and before cleaning or attempting maintenance activity.

5M90T SERIES

M90T SERIES

Introduction

Caution

Place the treadmill on a firm and even floor.
Keep the space 1 to 2 meters surrounding the
treadmill.

Keep the machine horizontal. If not, this can be
cause of vibration and noise.

Install the treadmill where ventilation is good.

Do not use the treadmill outdoors or in humid or
dusty environments so as to prevent malfunction.

● When you move the product, do not collide the product with the wall or drop it on the floor.

● The lubricant used in the treadmill shall be only the lubricant designated or provided by Motus.

If you use the general industrial lubricant or the one provided by other companies, the deck and
running belt may be damaged.

● After the installation, absolutely do not make unauthorized alteration.

● Make sure to use the power cord that Motus provides.

2m

1m

1m

Installation Precautions

6 MOTUS

M90T SERIES

Introduction

Warning

Place the plug completely into the outlet.

Bad connection with power source may cause
an explosion or a fire.

Do not use a worn-out plug or damaged outlet.

This can result in a risk of electric shock or fire.

The overheat of outlet can cause fire.

Do not hold the plug with a wet hand.

This can cause electric shock.

Check power source before use whether the
treadmill is proper for 120V AC or 230V AC.

Do not connect several plugs into one outlet box.
(Use the outlet with ground pin)

The overheat of outlet can cause fire.

Make sure the cable is not caught under
the machine or other heavy objects.

This can be the cause of electric shock,
disconnection or fire.

7M90T SERIES

M90T SERIES

Introduction

Precautions Before Use

●

●

●

●

●

●

●

●

●

●

You must begin the exercise after consulting with your physician prior to beginning the exercise.
Do not exercise if you are sick or patient. This can cause an accident.
Make sure the emergency stop lanyard is tied to you and emergency push button switch is
unlocked on the right position before beginning the exercise.
The connection line with CD, MP3, and headphone shall be linked prior to beginning the exercise.
If the connection is made during the exercise, it may cause an accident.
Make sure to check the conditions of the treadmill before beginning the exercise. If the treadmill is
not properly in operation, do not use it.
Wear proper exercise cloth and shoes. Tie long hair back before exercise.
The loose outfit or towel shall be away from the running belt not to become caught in the belt or
roller. In the event that an object is caught, the treadmill makes the sudden stop which causes an
accident.
Do not operate the treadmill when someone is standing on the treadmill.
Take care when getting on and off the treadmill. Use the handlebars whenever possible. Place
your feet on the right and left side platforms before the running belt begins moving. Step onto the
running belt when the speed in at or below 1.0 km/h.
Never step off the treadmill while the running belt is moving.

Grip head of the plug when you unplug it. Cable can be
disconnected if you pull cable itself when unplugging it.

Do not use extension cord.

Long cord can cause malfunction or stop of
treadmill due to voltage drop.

Do not place the machine near a heating device.

8 MOTUS

M90T SERIES

Introduction

Safety Guido

Please put safety guide on where to be easily
seen by user.

Cautions During Use

Warning

Do not allow children, individuals or disabled
persons on or near the treadmill.

Do not leave children unsupervised around the treadmill.

Always unplug the treadmill from the outlet
when it is not used, before cleaning or
attempting any maintenance tasks.

Attach Emergency lanyard to waist level prior to
beginning exercise.

Do not push buttons with sharp object or pin etc.

This can cause electric shock.

During operation, do not touch any moving parts or
rotating parts with one

’s hand or any other object.

This can lead to severe injury to your body or damage on the
product.

9M90T SERIES

M90T SERIES

Introduction

If you feel pain, dizziness, shortness of breath or abnormal symptoms during the exercise, stop the exercise
immediately and consult with a physician.
Please refrain from unnecessary action during the exercise, such as mobile phone conversation, talking with
another person, drinking beverages, etc as it can cause unexpected accident.
Do not use the treadmill in bare feet. Always wear shoes with rubber or high traction soles.
Do not allow more than one person to exercise on the treadmill.
The user manual indicates the maximum user weight of the product.
Do not allow any persons with more than the maximum user weight to use the product.
Make sure to use handle when mounting or dismounting the treadmill.
Absolutely do not walk or jog backwards on the treadmill. While the treadmill is in operation, do not try to turn
around on the treadmill.
Do not use the product for the purpose of animal exercise.
Do not use a damaged running belt or deck. Use of a damaged running belt or deck may cause high risk of
accident.
Make sure to exercise right in the middle of the running belt of the treadmill.
Exercise only at the speed and incline appropriate for your own physical strength. If you exercise at a speed
and incline faster than your capability, you may be under the risk of an injury.
Do not insert hand or any object in between the side platforms and the running belt.
Use your own safety guide including additional warning or cautions if necessary.
Treadmill is hard metal product, so make sure to be careful always when you use treadmill.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

DANGER

Grounding Instructions

The treadmill must be properly grounded. Grounding will protect you against the danger of electric
shock by providing a path of least resistance for electric current in case of malfunction or short
circuit.The treadmill is equipped with a power cord, whict has grounding conductor and a grounding
plug. The plug must be inserted into an approprinte outlet that is ploperly installed and grounded
inaccordance with all local cores and ordinances. lf you don’t follow these grounding instructions，you
could void the warranty or suffer severe injuries.

Risk of electric shock may result from improper connection of equipment-grounding conductor. Check
with a qualified electrician if in doubt about proper grounding techniques. Do not modify the plug
provided with the product. Any modifcation to the electrical plug will result in a voided warranty. lf it
doesn’t fit the outlet, get a proper outlet installed by a qualified techhician. For 120V-class treadmill in
North America, a 20 amp dedicated circuit is recommended and a temporary adaptpr must not be
used to connect the plug to a two-pole receptacle.

10 MOTUS

M90T SERIES

Basic Information

ⅡⅡ.. BBaassiicc IInnffoorrmmaattiioonn

Product Features

Ergonomics Design

Console screen, handlebars and side platforms are
ergonomically designed based on body line, running
stances and running habits or viewing angle.
Various exercise information can be easily read
through the display and touch sensitive keys make
the user operate it conveniently while exercising.

Exercise Program

Built-in exercise programs, which are based on scientific analysis, allow user to enjoy various
exercises, and custom programs allow user to edit exercise program appropriate for themselves. Also
user can enjoy goal-oriented exercise programs based on distance, calories and time.

Low Noise and Vibration

Through long-time manufacturing experience and
know-how, up-to-date structure analysis and
repeated tests, low noise is achieved and vibration
is minimized in wide speed range from low speed to
high speed. Higher torque in the low speed range
results in a little speed variation, which is based on
powerful motor and precise motor control.

M90T series treadmill is a distinct product line from Motus in its unique design and reliable functions
as advanced commercial treadmill.

Artficial Intelligence System

High-tech electric control system based on artificial
intelligence and high quality motor provides you the
best feeling of exercise and enables you to operate
treadmill under the optimum conditions.

11M90T SERIES

M90T SERIES

Basic Information

Convenient Manager Mode

Manager can set up maximum exercise time, maximum speed limit, measurement unit, pause time,
etc. Also, manager can check accumulated distance, accumulated time, error log, etc, so it enables
manager to maintain the product more effectively.

Heart Rate Course

The workout programs based on heart rate
monitoring are the optimal way to exercise safely
and efficiently within user’s fitness capability.
M990T series is equipped with built-in contact
heart rate system and optional telemetry heart
rate system, which measures user’s heart rate
exactly and then adjusts the workout intensity
according to target heart rate.

Shock Absorber System

Multiple shock absorption not only helps to
protect the joints of knees or ankles from the
repetitive impact of running but also offers natural
feeling during exercising.

12 MOTUS

M90T SERIES

Basic Information

Name of Each Part

Display Console

Accessory Tray

Emergency Key

Side Handlebars

Upright

Handle Posts

End Cap

Adjustable

Rear Feet

Side Platforms

Running Belt

Emergency Key
Audio Jack

Motor Hood

CSAFE DOWNLOAD