Motul TEKMA MEGA User Manual

TEKMA MEGA
15W-40

Lubricant for Heavy Duty Diesel engines
SHPD: « Super High Performance Diesel »

TYPE OF USE

All low emissions European, American or Japanese heavy duty Diesel engines naturally aspirated or
turbocharged, in line with Euro II, Euro III, Euro IV, Euro V, fitted with EGR System (Exhaust Gas Re­circulation), SCR (Selective Catalytic Reduction), or older engine generation: Trucks, Bulldozers,
Construction machinery, Buses, Farm machinery, Stationary engines, Boat engines...
Can be used as single lubricant in case of fleet composed of new & old generation engines.

PERFORMANCES

STANDARDS ACEA E7 (Replaces E5 and E3)
API CI-4 / CH-4

APPROVALS CUMMINS CES 20071 / 72 / 76 / 77 / 78, MACK EO-N, MAN M 3275,
MB-Approval 228.3, RVI RLD-2, VOLVO VDS-3

PERFORMANCES CATERPILLAR ECF-2, Global DHD-1, MTU Type II
Also suitable for SCANIA, IVECO, DAF… when an ACEA E3/E5 lubricant is required.

The new standard Global DHD-1 is the result of requirements defined by European = ACEA, American
= API and Japanese = JASO associations.
The new API CI-4 performance ensures protection and longevity of engines fitted with EGR systems:

- dispersant and anti-oxidation properties: protection against soot build-up and oil filter clogging.

- superior Anti-Wear level: bore polishing protection.

- superior detergent level: piston cleanliness and piston groove deposits control.
Anti-corrosion, Anti-rust, Anti-foam.

RECOMMENDATIONS

Drain interval: refer to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral oils.

PROPERTIES

Viscosity grade SAE J 300 15W-40
Density at 20°C (68°F) ASTM D1298 0.872
Viscosity at 40°C (104°F) ASTM D445 104.3 mm
Viscosity at 100°C (212°F) ASTM D445 14.9 mm
Viscosity Index ASTM D2270 149
Flash point ASTM D92 226°C / 439°F
Pour point ASTM D97 -39°C / -38°F
TBN ASTM D2896 10.5 mg KOH/g

2

/s

2

/s

We retain the right to modify the general characteristics of our products in order to offer to our customers the latest technical development.
Product specifications are not definitive from the order which is subject to our general conditions of sale and warranty. – Made in France

MOTUL - 119 Bd Félix Faure - 93303 AUBERVILLIERS CEDEX - BP 94 - Tel: [phone] - Fax: [phone] - Website: www.motul.com 11/16