Getting started with navigation
ENGLISH
Precautions for safe driving
Please observe and comply with local traffic
rules and regulations.
•
•
For your safety, some features cannot be operated while driving. Features that cannot be
operated will be disabled.
•
•
The route displayed for destination guidance
is a reference and the route guidance will take
you to the vicinity of your destination. The highlighted route is not always the shortest distance,
the least congested, and in some cases might,
not be the fastest route.
•
•
Road, name, and POI information may not
always been completely updated. It might happen that road names and POI information is not
up to date.
•
•
The car position mark does not always indicate
your exact location. This system uses GNSS
information, various sensors, and road map data
to display the current position. However, errors
in displaying your location may occur if the satellite is transmitting inaccurate signals or two or
less satellite signals can be received. Errors that
occur in such conditions cannot be corrected.
•
•
The position of the vehicle within the navigation
may differ from your actual location depending
on various reasons, including the satellite trans-
mission state, vehicle state (driving location and
conditions), etc. Additionally, the car position
mark may differ from the actual position if the
map data is different from the actual road landscape, such as changes due to the construction
of new roads. If such differences occur, driving
for a short period of time will automatically
correct the position of the vehicle through map
matching or GNSS information.
What is GNSS?
The GNSS(Global Navigation Satellite System) is
a satellite-based navigation system made up of
a network of 32 satellites placed into orbit by the
Global Positioning System (GPS) of U.S.A, GLONASS
of RUSSIA, etc.
GNSS works in any weather conditions, anywhere
in the world, 24 hours a day.
There are no subscription fees or setup charges to
use GNSS.
About satellite signals
Your unit must acquire satellite signals to operate.
If you are indoors, near tall buildings or trees or in a
parking garage, the unit cannot
acquire satellite signals.
Acquiring satellite signals
Before the unit can determine your current position and navigate a route, you must do the following steps:
1. Go outside to an area free from tall obstructions.
2. Turn on the unit.
Acquiring satellite signals can take a few
minutes.
Initial navigation screen
When you enter a navigation mode for the first
time, the caution screen is displayed on the
screen. Read the caution carefully and then
press [Agree].
•
•
If you want to change the system language,
press [Language]. For details refer to page
42(“Language”).
•
•
If there is no operation for 10 seconds in the
caution screen the system automatically
switches to the navigation screen.
27
Bluetooth® Wireless Technology
Before Using the Bluetooth
Handsfree
What is Bluetooth®
Wireless Technology?
•
•
Bluetooth ® Wireless Technology refers to a
short-distance wireless networking technology which uses a 2.45GHz frequency to connect various devices within a certain distance.
•
•
Supported within PCs, external devices,
Bluetooth® phones, PDAs, various electronic
devices, and automotive environments,
Bluetooth ® Wireless Technology to be transmitted at high speeds without having to use a
connector cable.
•
•
Bluetooth® Handsfree refers to a device which
allows the user to conveniently make phone
calls with Bluetooth® mobile phones through
the Multimedia system.
•
•
The Bluetooth® Handsfree feature may not be
supported in some mobile phones.
Precautions for Safe Driving
•
•
Bluetooth® Handsfree is a feature that enables
drivers to practice safe driving. Connecting the
head unit with a Bluetooth® phone allows the
user to conveniently make calls, receive calls,
and manage the phone book. Before using
Bluetooth ® Wireless Technology, carefully read
the contents of this user’s manual.
•
•
Excessive use or operations while driving may
lead to negligent driving practices and be the
cause of accidents. Do not operate the device
excessively while driving.
•
•
Viewing the screen for prolonged periods of
time is dangerous and may lead to accidents.
When driving, view the screen only for short
periods of time.
Cautions upon Connecting
Bluetooth Phone
•
•
Before connecting the head unit with the
mobile phone, check to see that the mobile
phone supports Bluetooth® features.
•
•
If you do not want automatic connection with
your Bluetooth® device, turn the Bluetooth®
feature off of the Bluetooth® device.
•
•
Park the vehicle when connecting the head
unit with the mobile phone.
•
•
Some Bluetooth features may occasionally not
operate properly depending on the firmware
version of your mobile phone. If such features
can be operated after receiving a S/W upgrade
from your mobile phone manufacturer, unpair
all devices and pair again before use.
28
Bluetooth Connection
ENGLISH
When no Phones Have Been
Paired
Press the key on the steering wheel or
press the key ▶ Press the OK .
Pairing from the Bluetooth® Device
Press the
Search from device
From the Bluetooth® device, search for the car
name and pair the device. When searching from
the Bluetooth® device, the car name is AVANTE
and the default passkey is ‘0000’.
MENU
button ▶ Press the
.
Pairing from the car
Press the
Search from car
pair ▶ Press the
MENU
button ▶ Press the
▶ Press the phone name to
YES
.
29
Bluetooth Connection
When a Phone is Already Paired
Press the key on the steering wheel or
press the key ▶ Press the OK ▶
Press the phone name to pair ▶ Press the
NOTE
• When a Bluetooth device is connected, a new
device cannot be paired. If you want to pair a new
phone, first disconnect the connected Bluetooth
device.
YES
.
When your phone is
connected
Press the key on the steering wheel or
press the key on the head unit to display the following screen.
NOTE
• Once Bluetooth connection is successful, the name
of the connected mobile phone will be displayed
on the phone screen and Bluetooth handsfree
functions will be ready to be operated.
• Some functions may not be supported due to
limited Bluetooth compatibility between the car
system and mobile phone.
30
Bluetooth Phone
ENGLISH
Making/Answering Calls
Calling by Dialing a Number
Enter number on the Dial Pad ▶ Press the
button or the key on the steer-
ing wheel.
NOTE
• If you press the wrong number, press to
delete one digit of the entered number. Press and
hold the dial pad 0 "+" to enter a "+".
• Press the button to search phone numbers.
For detail, refer to the “Searching for contacts “ on
the page 33.
Making a Call from Speed Dial
Enter the 1 or 2 digit speed dial number with the
Dial Pad ▶ Press and hold the last number.
Calling through Redial
Press and hold the button or Press the
key on the steering wheel twice.
NOTE
• Redialing is not possible when there is no dialed
calls list.
Answering a Call
Incoming call notice ▶ Press the
button or the key on the
steering wheel.
Rejecting a Call
Incoming call notice ▶ Press the
button or the key on the
steering wheel.
31
Bluetooth Phone
Operating Menus during a
Call
1 2 3 4 5
Button Description
1
2
3
4
5
Ends a call.
Turns the Mic On/Off.
Switches a voice call from the car
handsfree to the mobile phone.
Display dial pad screen for entering ARS numbers.
3 Way call
Ending a Call
While on a call ▶ Press the button or
the key on the steering wheel.
Switching Call to Bluetooth® Phone
During handsfree call ▶ Press the but-
ton or press and hold the key on the
steering wheel
During call on mobile phone ▶ Press the
button or press and hold the
key on the steering wheel
Making 3 way call
While on a call ▶ Press the button.
Press phone number you want to make a call
Press the button.
▶
▶
32
Bluetooth Phone
ENGLISH
Using the Menu Buttons
In Phone screen ▶ Press the
use Contacts , Calling list , Favorites , Bluetooth
settings .
MENU
button to
Contacts
Updating Mobile Phone Contacts
Up to 5,000 mobile phone contacts can be
updated.
In Contacts screen ▶ Press the
Press the
▶
Update
.
The contacts are deleted and the contacts
of the connected phone is updated.
MENU
button
Making a call from contacts
In Contacts screen ▶ Press the
Press the
Contacts
button ▶ Press the contact
you want to call.
MENU
Searching for contacts
In Contacts screen ▶ Press the
Press the
Search
▶ Enter the name ▶ Press the
OK
▶ Press the contact you want to call.
MENU
button
button
▶
▶
33
Bluetooth Phone
Calling list
Viewing Calling lists
In Phone screen ▶ Press the
Press the
Press the
Calling lists
MENU
Button Description
All
1
Missed
2
Received
3
Dialed
4
.
button on Calling list screen.
Displays all calling list.
Displays the missed calling list.
Displays the incoming calling
list.
Displays the outgoing calling
list.
1
2
3
4
MENU
button
Favourites
Calling Favourites
In Phone screen ▶ Press the
▶
Press the
want to call.
Saving to Favourite
In Phone screen ▶ Press the
button.
Favourites
MENU
button
▶
▶ Press the Favourite you
Add to favourites
In Contacts screen or Calling list screen ▶ Press
and hold the contact you want to save ▶ Press
Save to Favourites
the
.
NOTE
• The calling list may not be saved in some mobile
phones.
34
Loading...