MOTREX MTXH100 User Manual

(Head Up Display)

User Manual

Table of Contents

▣ Before use (HUD, OBD

1. Components｜5

※ MOTREX HUD Main Body Buttons

2. HUD Installation｜7

3. MOTREX HUD APP Installation & HUD Connection｜10

4. WAZE APP Installation｜10

5. WAZE Navigation｜11

6. MOTREX HUD APP Settings｜12

1) Car information settings

2) OBD information correction

3) HUD Setting

7. Display ｜19

8. OBD Update ｜22

(If the firmware related to OBD is separately operated)

9. Firmware Update｜26

10. Product Specifications and other Information｜28

1) Product specifications

2) FCC regulations

)

■

Checklist Before Use - HUD

▶ MOTREX HUD is a navigation system that uses WAZE MAP.

▶ Both MOTREX HUD APP and WAZ APP need to be installed on the user's mobile phone.

▶ Once MOTREX HUD APP is open and the destination has been entered on WAZE,

the GPS navigation can start . ▶ As the information is delivered through the WAZE server, the estimated arrival time on WAZE and HUD may not match.

▶ WAZE only works and the connection with HUD is maintained while MOTREX HUD APP

is on. (only inside the car)

▶ Navigation starts by opening MOTREX HUD APP and clicking the navigation button to

start WAZE MAP.

- For auto start navigation, navigation is automatically connected when HUD APP is launched.

▶ Display protection

- HUD display angle tilted by 45 degrees when the car is parked

·When the surrounding environment is bright or the temperature rises due to the strong sunlight, tilt the display angle

by 45 degrees to protect the display.

- When the temperature inside the car is high, the display brightness is dimmed.

·When the car is parked outdoor in the summer, the display may be dimmed when the HUD is launched.

- Do not manually adjust the display (TOLED) angle by force.

·Forcefully moving the display (TOLED) angle may break the product.

- 'Auto' brightness is recommended for the display (TOLED).

·When the display is used for a long time at a high brightness setting, the life of the display (TOLED) may

shorten.

▶ The power for MOTREX HUD H100 is supplied through OBD Ⅱ.

- If the car model is supported by OBD II, the car setting can be established in MOTREX HUD APP.

·Ask the seller or the installer for the types of car models supported.

If you do not have a vehicle on the OBD II supported vehicle list, you can use it by entering the OBD II Standard information.

(It is limited to Hyundai and Kia vehicles.)

▶ MOTREX HUD APP may not work if the user's mobile phone in the battery saver mode.

- When the mobile phone display is off or when MOTREX HUD APP is running on the

background

Supported OS : iOS 10.0 or higher / Android 5.0 or higher

■

Checklist Before Use - OBD

▶ For the OBD Ⅱ setting, the car must be fully started and MOTREX HUD APP must be

launched.

(Setting cannot be modified under ACC ON or KEY ON status.)

▶ Please reenter and save the car information after an OBD Ⅱ firmware or DB file update.

▶ Please check the information (year/fuel type/mileage) on the vehicle registration before

entering the car information on OBD Ⅱ.

(When using the car information (vehicle identification number) attached to the car, OBD

Ⅱ communication may not work properly.)

▶ Although the car model name is the same due to the manufacturer’s categorization by

model year, the cars actually supported may be different from the list of cars supported.

▶ There may be restrictions in functions depending on the car’s grade (trim) and

options.

▶ There may be restrictions in some functions (genuine trip setting) related to OBD Ⅱ

communication. In this case, the operation is only enabled under ACC ON status.

▶ OBD Ⅱ is not supported for a car with structural modification.

▶ For some hybrid cars and cars that use two types of fuel, the fuel efficiency information

may not match the actual measurement.

If necessary, please correct the fuel efficiency before use.

▶ For electric cars, the fuel efficiency option is disabled. Remaining gas is replaced with

the battery charge rate.

▶ Fuel efficiency and distance to empty may change according to the driving condition,

therefore, it may be different from the officially recognized value or the actual distance

traveled. If necessary, please correct the fuel efficiency before use.

▶ For some car models, the method of installation may be different.

▶ When more than 7 car DB has been registered on OBD Ⅱ, OBD Ⅱ will not work and

there will be no compensation. This does not apply if a same car is being registered

repeatedly.

▶ Vehicles not listed on the supported vehicle list (passenger standard, vehicles fitted with

standard OBD) should be used by setting the vehicle to OBD II Standard on other vehicles.

(It is limited to Hyundai and Kia vehicles.)

▶ When connecting an OBD II module using Y-CABLE, there may be errors in the function

and operation of the product.

▶ The OBD II module must be used with direct contact with the vehicle connector.

■

User Manual

(Head Up Display)

1. Components

HUD（main body)

HUD main cable

User manual

Angle-Adjustable cradle

OBD ll module

Fixed cradle

Fixing clip

■

※ MOTREX HUD Main Body Buttons

Reset

- Press with a sharp object to reset the HUD.

Power (touch sensor)

- When the power button is pressed, the LCD (TOLED) opens and turns on.

- When the power button is pressed when the power is on, the LCD (TOLED) closes and the system is turned off.

LCD(65K color AM TOLED)

- Use the HUD APP to adjust the angle.

※ When the HUD auto-start is selected on MOTREX HUD APP

** It automatically turns on when starting up the car (ACC ON) and off when the engine turns off (ACC OFF).

※ When the HUD auto-start is not selected on MOTREX HUD APP

** The user can manually turn on/off with the power button.

※ The LCD (TOLED) may break when the angle is adjusted by force. ※ The standard for ACC ON may differ by car model.

■

2. HUD Installation

Check where

the OBD

terminal is

Organize

the cables

Set the

HUD location

Connect the

OBD ll module

Embed the

HUD main cable

Connect the OBD ll

module with the

HUD main cable

Connect the

HUD main cable

Attach HUD to the dashboard

※ When the first OBD module is connected to the vehicle, the HUD will illuminate for 10 minutes.

Please set up the vehicle in the MOTREX HUD APP. The HUD APP automatically switches off after 10 minutes without having to set up the vehicle, after which the HUD must be switched on.

1) Check where the OBD Ⅱ terminal is.

(The location of the OBD terminal is different by car.)

2) Decide where to install the HUD.

(Decide the location and install. Order of recommendation: 1, 2, 3)

3) Embed the HUD main cable.

(Check the length of the main cable and then embed the HUD main cable.)

■

4) Connect the HUD main cable to the HUD.

(When connecting the HUD main cable, make sure the thicker part does not get inside the place for the cables as shown in the image below.)

5) Attach the HUD on the dashboard.

(Install the HUD on the cradle and remove the 3M tape to attach the HUD on the dashboard.) (Choose the cradle of your preference between the adjustable type and the fixed type.)

Adjustable Type Fixed Type

* Above images are provided for reference.

6) Use the clips to organize the line.

■

7) Connect the OBD module to the OBD terminal.

8) Connect the OBD module with the HUD main cable.

■

3. MOTREX HUD APP Installation and HUD Connection

1) Open App Store (iOS) or Google Play Store (Android) on the

smartphone.

2) Search for “MOTREX HUD”.

3) Download and install MOTREX HUD APP from App Store (iOS) or

Google Play Store (Android).

4) Open MOTREX HUD APP.

5) Install MOTREX HUD APP and use Bluetooth to connect the

smartphone with HUD.

6) When the Bluetooth connection pop-up appears on the

smartphone display, select “Accept”.

(When Bluetooth has not been activated on the user’s smartphone)

7) Select H100 on the HUD connection screen on the smartphone

to complete connection.

4. WAZE APP Installation

1) Open App Store (iOS) or Google Play Store (Android) on the

smartphone.

2) Search for “WAZE” in the search box.

3) Download and install WAZE APP from App Store (iOS) or Google

Play Store (Android).

4) Open WAZE.

※ Both MOTREX HUD APP and WAZE APP should be installed. ※ You can also install WAZE APP by selecting Navigation on the

main screen of MOTREX HUD APP.

■

+ 22 hidden pages

MOTREX MTXH100 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual