Motorvac TransTech III+ 500-1100B User Manual

TransTech™ III+

Transmission Service System

Part No. 500-1100B

UNIT EQUIPPED WITH V-2 CONTROL BOARD

USER MANUAL

Introduction

Congratulations on your selection of the The TranTech™ III+ Transmission Service System. By choosing this
product, you are acquiring the most technologically advanced method available for automatic transmission
service and uid exchange.

The TransTech™ III+ System is a self-contained system designed to connect to any automatic transmission
through cooling system lines or vehicle dipstick tube. Once the unit is connected, it can be used to drain the
uid from the vehicle’s transmission for lter replacement and/or to completely exchange the transmission
uid with new uid, without removing the vehicle’s transmission uid pan.

Please study this Operators Manual to become thoroughly familiar with the TransTech™ III+ Transmission
Service System.

Thank you for choosing MotorVac.
Sincerely,
The MotorVac Team.

Table of Contents

Page

System Features and Functions ………..…………………………………………….....................…………

Control Panel Features and Functions ….......................……………………………………………...……..

Getting to Know the TranTech™ III+ ……..……………………………………………..……………….........

Safety Information and Precautions ………………………....…………………………………….................

TranTech™ III+ Initial Setup Procedure ………………………....…………………………………….............

Transmission Service Procedure ………………………....…………………………………......…................

Optional Procedure - Drain Pan for Filter Change ………………………....…………………………………

Changing Fluid Types ………………………....…………………………………......…................................

Maintenance Procedures ………………………....………………………………........................................

Troubleshooting and Additional Help ………………………....…………………………………...................

Error Alerts ………………………....…………………………………......…................................................

TransTech™ In-line System Adapters ………………………....……………………....................................

Parts ………………………....…………………………………......….........................................................

1

2

3

4 - 5

6

7

8

9

10

11

12

12

13

System Features and Functions

LOW
VEHICLE
FLUID

LOW
CLEAN
FLUID

START ENGINE

STOP ENGINE

COMPLETE

SERVICE IN
PROGRESS

STOP

DRAIN

FLOW

DIRECTION

MODE

FILL

EMPTY
WASTE

AUTO

START /

RESUME

FLUID EXCHANGE

TransTech lII+

The front of the TransTech™ III+ cabinet contains the control panel, the uid ll neck for adding new
transmission uid, and the uid level windows.

Automatic Flow Direction Detection

The TransTech™ III+ is capable of automatically sensing the direction of uid ow in the
transmission cooling circuit and aligning the ow internally. A dual one way ltration system
ensures that internal lters are never backushed into a vehicle.

MODE Button – Press and hold MODE button 5 seconds until the alarm sounds. After releasing the button
will toggle between manually selecting the inlet hose. This feature can be used for troubleshooting service
issues.

MODE LEDS
Fig 1 Indicates ow direction mode is set to automatic but ow direction has not been determined yet. Flow
direction is determined when a service is started.
Fig 1 (ashing) Indicates no ow is detected. Ensure hoses are connected properly and vehicle is turned on.
Fig 2,3 Shows the ow direction as manually selected in either direction.
Fig 4,5 Shows that the ow direction mode is automatic and the ow direction has been determined. The
arrow indicates the ow direction.

1

Control Panel Features and Functions

START/RESUME Button - Begins & Resumes service

DRAIN Button - Drains uid from vehicle’s transmission.
FILL Button – Adds uid to the transmission.

LOW VEHICLE FLUID LED - Illuminates when uid in the vehicle in service is low or

empty.

COMPLETE LED - Illuminates when service is complete.

START ENGINE LED – The LED illuminates when the vehicle’s engine is running in inline

mode. The Start Engine LED ashes when the vehicle’s engine needs to be started.

STOP ENGINE LED – LED illuminates when the vehicle’s engine is OFF in inline mode.
The Stop Engine LED ashes when the vehicle’s engine needs to be stopped.

LOW CLEAN FLUID LED – Illuminates when clean uid in the unit’s clean tank is low or
empty.

STOP BUTTON – Pauses service and stops alarms. Hold for 5 seconds to reset unit.

EMPTY WASTE BUTTON - Empties uid from unit’s waste tank.

MODE BUTTON – Toggles between four different modes (Inline/Dipstick etc)

2