Congratulations on your selection of the TRANSTECH-1000 Transmission Service System. By choosing this
product, you are acquiring the most technologically advanced method available for automatic transmission service
fluid exchange.
The TRANSTECH-1000 System is a self-contained system; designed to service any automatic transmission thru
it’s’ dipstick tube. Once the unit is connected, it can be used to drain the fluid from the vehicle’s transmission for
filter replacement and/or to completely exchange the transmission fluid with new fluid, without removing the
vehicle’s transmission fluid pan.
It is recommended that a vehicle’s transmission lubrication system be serviced every 15,000 miles
(Or according to the vehicle owner’s manual) to obtain the highest lubricant protection, to reduce friction from
internal transmission components, and thus increase the efficiency and life span of the transmission to its’
maximum.
Please study this Operators Manual to become thoroughly familiar with the TRANSTECH-1000 Transmission
Service System.
IMPORTANT
The TRANSTECH-1000 Transmission Service System is designed to work
EXCLUSIVELY
with Automatic Transmission Fluid.
Use of any chemical during this process may cause operational failure of the
TRANSTECH-1000 System and voids the manufacturer’s warranty.
See warranty card for details.
Overview
This manual contains all the information you need to use the TRANSTECH-1000 System. Please make sure all
technicians using the unit read this manual and have it within easy reach whenever the unit is being used.
The following is a quick reference to the information in this manual:
System Features and Functions
This chapter describes the TRANSTECH-1000 Transmission Service System’s Switches, Lights and
Connections.
Safety Information
Adhere to the safety guidelines in this chapter at all times!
Before You Begin
Follow the instructions in this chapter before using the unit for the first time.
Service Procedure
This chapter contains step-by-step setup and service procedure for using the unit to drain the vehicle’s
transmission oil pan and/ or to exchange the fluid completely.
Frequently Asked Questions
Troubleshooting and Additional Help
Appendices - Maintenance, Accessories, and Parts
Helpful information to common questions.
Turn to this chapter in the unlikely event you have problems with your TRANSTECH-1000 System or need
additional help.
The appendices contain routine maintenance procedures for the TRANSTECH-1000 System, such as
cleaning the filter screen, lists of available accessories, replacement parts, and the Material Safety Data
Sheet.
System Features and Functions
The front of the TRANSTECH III cabinet contains the control panel, the fluid fill neck for adding new
transmission fluid, and the fluid level windows.
A
B
C
A. CONTROL PANEL
B. CLEAN TANK FILL
C. FLUID LEVEL WINDOWS
Front View - Control Panel Features and
Functions
A
E
B
C
D
A. Vacuum-Off-Fill
Switch.
Turns on pump and activates valves to initiate vacuum, Fill
or turn unit off.
B. Vacuum light
Illuminates when unit is powered in vacuum mode.
C. Empty Waste
Turns on pump and activates valves to evacuate the waste
switch
capture tank fluid.
D. Circuit Breaker 15 amp circuit breaker to protect unit from overloads.
E. Fill light
Illuminates when unit is powered in Fill mode.
Loading...
+ 13 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.