Motorola Solutions 89FT5845 User Manual

Boost MobileTM Voice Mail

Greetings Schedule

You can choose to have your greetings automatically activated based on a pre-determined time schedule. By activating the Greeting Schedule, Greetings 1, 2, and 3 will automatically play according to the time schedule listed below.

Greeting 1 Evenings and

Greeting 2 Weekday

Greeting 3 Weekday

To activate the greeting schedule: 1 From the main voice mail menu, press 3 to

access the greetings menu.

2 Press 9 to activate your greeting schedule. 3 Press ** to return to the main menu.

Note: The greeting schedule, when on, will

Weekends

Mornings

Afternoons

override any other greeting that you may set as active. If a greeting is not recorded, a system standard greeting will be played.

5:00 pm – 7:59 am, Monday – Friday 24-hours, Saturday and Sunday

8:00 am – 11:59 am Monday – Friday

Noon – 4:59 pm Monday – Friday

Automatic Playback

By default, the playback mode of your voice mail service is set to normal. This feature automatically plays and saves new messages when you log in. To activate automatic playback:

1 From the main voice mail menu, press 4 to

access personal options.

2 Press 4 to access personal preferences. 3 Press 2 to access playback preferences. 4 Press 2 to switch between automatic and

normal playback.

5 Press ** to return to the main menu.

Changing the Playback Order of Messages

You can select the order in which you want unheard messages to be played. You may listen to the last received message first, or you may listen to the first received message first. To select the order in which new messages should be played:

1 From the main voice mail menu, press 4 to

access personal options.

2 Press 4 to access personal preferences. 3 Press 2 to access playback preferences. 4 Press 1 to switch between the playback orders. 5 Press ** to return to the main menu.

Advanced Voice Mail Features

Recording, Forwarding, and Replying to Messages

These functions allow you to record and send, reply to, or forward a message to an assigned destination address list number. If you record a complete or partial message, but do not send it, Boost Mobile

Voice Mail service will refer to this

message as an “in preparation” message. To record and send a message: 1 From the main voice mail menu, press 2 to

record a message.

2 Record your message and press # to end the

message.

3 Press 9 at the prompt to indicate that you want

to send the message or press 5 for delivery options.

4 Enter the mail box number list number(s). (A

mail box number is the 10-digit Boost Mobile PTN of a Boost Mobile

Mobile area. The name of the recipient plays if it is

customer must be in your local calling

customer. The Boost

recorded.)

5 Press # to send. 6 Press ** to return to the main menu.

Note: You can only send messages using this

method to Boost Mobile

customers in

your home market.

Delivery Options

After you have created a message, you can assign the message to a category before you send it. Below is a list of the options that can be applied to a message:

•Urgent — Recipient will hear this message before other messages.

•Boost

• Notification of Non-Delivery — You will be

• Future Delivery — You can specify a time and

To set a special delivery option:

1 After recording your message, but before

Walkie-Talkie— Recipient cannot copy

the message to another mail box or phone number.

notified if the recipient has not listened to your message by a certain date and time.

date (up to three months in advance) for the message to be delivered.

Note: All dates must have digits in the MM/DD

format (2 digits for the month and 2 digits for the date). For example, January 2nd would be 0102.

Important: Once a message has been sent for

future delivery, it cannot be retrieved or deleted.

sending it, press 5 for delivery options.

Boost MobileTM Voice Mail

2 Press the number that corresponds with the

desired delivery option:

• Press 1 for urgent.

• Press 2 for private.

• Press 3 for notification of non-delivery. At

prompt, specify time and date.

• Press 4 for future delivery of messages. At

prompt, specify time and date.

• Press 9 to send the message immediately.

3 The list of options will be presented again.

Select an additional option or press 9 to send the message.

4 Enter the destination mail box list number of the

recipient(s).

5 Press # to send. 6 Press ** to return to the main menu.

Working With Group Lists

This feature enables you to create a list and assign it a unique name. Then, you can add mail box numbers, group lists, or individuals. Once you create a list, you can send a voice message to everyone on the list by entering the group list number. You can have up to 40 group lists. Each list can hold up to 50 addresses.

To set up a group list: 1 From the main voice mail menu, press 4 to

access personal options.

2 Press 2 to access your group lists. 3 Press 2 to create a group list. 4 Enter the 1- or 2-digit group list number and

press #.

5 Record a name for the list and press #. 6 Select group members by mail box number,

group list, or name.

7 Press # to save all entries added to the list. 8 Press ** to return to the main menu.

To modify a group list: 1 From the main voice mail menu, press 4 to

access personal options.

2 Press 2 to access group lists. 3 Press 4 to modify a group list. Enter the

number of the group list you want to modify.

4 Press 1 to add a new recipient. 5 Press # to save your changes. 6 Press ** to return to the main menu.

To delete a group list: 1 From the main voice mail menu, press 4 to

access personal options.

Advanced Voice Mail Features

2 Press 2 to access group lists. 3 Press 3 to delete a group list. 4 Enter the number of the group list you want to

delete. The system will play the name of the group list.

5 Press # to delete the list. 6 Press ** to return to the main menu.

Message Forwarding

Note: You can only forward messages to Boost

Mobile customers in your home market.

This feature allows you to program your phone to automatically forward incoming messages to another mail box. There are two types of forwarding: notified and silent. Notified forwarding prompts the caller that the message will be forwarded. Silent forwarding does not prompt the caller that the message will be forwarded.

To modify forwarding options: 1 From the main voice mail menu, press 4 to

access personal options.

2 Press 5 to modify forwarding options. 3 Select the applicable option below:

• To create a forwarding number, press 2.

• If you have already created a forwarding

number, press 2 to modify the number.

• To enable or disable message forwarding,

press 3.

• To change the forwarding type, press 2.

4 Press ** to return to the main menu.

SMS

SMS Messages

Short Message Service (SMS) messages are short text messages, also called text and numeric messages. You can send SMS messages through any email account or on www.boostmobile.com.

Your phone receives SMS messages sent to its SMS address, but does not send SMS messages.

Your phone's SMS address is your PTN@myboostmobile.com.

If your phone is powered off when you receive a message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area.

Your phone attempts to deliver these messages for up to 7 days.

Receiving a Message

When you receive a text and numeric message, New Text Message appears on the display.

To view the message:

1 Press A under Read.

2 If the message fills more than one screen, scroll

to read it.

3 To keep the message, press O. -or-

To delete the message, scroll to the end of the message, then press A under Delete.

To dismiss the message notification:

Press A under Back. This icon

you that you have a new message.

w appears on the display, reminding

Reading from the Message Center

1 From the main menu, select Messages > SMS. 2 Select the message you want to read. 3 If the message fills more than one screen, scroll

to read it.

4 To keep the message, press O. -or-

To delete the message, scroll to the end of the message, then press A under Delete.

Calling and Storing Numbers

If an SMS message you receive contains a phone number, you can call that number by pressing s while viewing the message.

SMS Messages

If an SMS message you receive contains a phone number, Boost Talkgroup ID, you can call or send a call alert to that number, or store that number to Contacts. Press m while viewing the message to access these options.

Walkie-Talkie number, or

To call the number, select Call Back. To send a call alert, select Alert, then press the

Walkie-Talkie button.

Boost To store the number to Contacts, select Store

Number.

BoostTM Wireless Web Services

You can use your phone’s Web feature to access a suite of wireless data products known as Boost Wireless Web. Services include Text Messaging, Web and Premium Web, Address Book, Mobile Email, and wireless access to AOL Messenger

With the exception of the Text Messaging Express service, Boost the activation of a Boost plan. To order, go to www.boostmobile.com or call 1-888-BOOST-4U (1-888-266-7848). You can also contact your Boost

Wireless Web Services require

Wireless Web service

Authorized Dealership.

Instant

Starting the Microbrowser

Just as you use Netscape Navigator® or Microsoft® Internet Explorer to browse the Web from your desktop, the microbrowser allows you to explore and use a variety of Internet services. To begin using the Boost

1 Press m to access the Main Menu. 2 Scroll to Web. 3 Press A under SELECT. 4 Your home page displays.

Wireless Web:

Note: The first time you access Web, you will be

asked to enable security to ensure your information remains private and secure.

• Press A under Yes. The phone will

5 Scroll to highlight the service you wish to access

display: Generating…, Computing…, Sending))))).

• You may be asked to (re)enable security as Boost upon your return to the U.S. after traveling.

• When transmitting highly personal or sensitive data, such as a credit card number, you will see the Secure Data icon

E. This icon indicates that the data is

encrypted during transmission.

adds new services or

and press A under Ok. -or- Press the number shown to the left to

automatically jump to that service. Press * to return to the previous screen. To return to the home page, press e.

6 To exit the browser, press e until the idle

screen displays. -or- Press and hold m. The Browser Menu screen

displays with Exit Browser highlighted.

Starting the Microbrowser

Press A under OK. When you re-enter Web, you will enter on the page from which you exited

BoostTM Wireless Web Navigation Keys

•Home — Press e to return to your home page. Tip: Press e twice to return to your phone's

idle screen.

•Back — Press * to return to a previous screen.

•Scroll — A scroll bar on the left of the phone’s display indicates that additional text can be viewed. Scroll using the navigation key.

Tip: While navigating through Boost

screens, a number may appear to the left of the application or topic you want to access. Press the corresponding number on the keypad for quicker access to that

Wireless

application or topic.

When transmitting highly personal or sensitive data, such as a credit card number, this icon

Eappears, indicating that the data is encrypted

during transmission.

Note: You may be asked to (re)enable security

as Boost your return to the U.S. after traveling.

adds new services or upon

For more information and multimedia demos, go to www.boostmobile.com. You can also get one page service-specific guides called Frequently Asked Questions and other instruction for Boost Wireless Web Services at www.boostmobile.com.

My Pictures

My Pictures lets you view pictures you received in MMS messages.

Viewing Pictures

To view pictures stored in My Pictures: 1 From the main menu, select My Pictures.

The pictures stored are listed by name.

2 Select the picture you want to view.

Note: If this icon ] appears next to a picture,

you cannot send it in a message.

Getting File Information

To view the file type and file size of a picture:

1 Scroll to or select the picture. 2 Press m. 3 Select Details.

Deleting Pictures

1 Scroll to or select the picture you want to delete. 2 Press m. 3 Select Delete.

Managing Memory

To view your used memory, free memory, and memory capacity:

1 Scroll to or select any picture. 2 Press m. 3 Select Memory Size.

Note: Pictures are stored in your phone using

the same memory space used to store Java applications data, voice records, ring tones, messages, and wallpaper images. Deleting some of these other items frees memory space for pictures.

My Info

My Info lets you view information about your phone and send this information to other phones.

Viewing My Info

1 From the main menu, select My Info. 2 Scroll to see the entire screen.

The My Info screen contains:

•My Name — You can enter your name here.

•Line 1 — your phone numbers for phone line 1.

Each number appears when you receive your first call on that line.

•Boost

• Carrier IP — the IP address assigned to

• IP1 Address and IP2 Address — the IP

Walkie-Talkie Number — Your

Boost

Walkie-Talkie number is the number that others use to contact you using Boost Walkie-Talkie calls. This number appears when you receive your first Boost

Boost

. This number appears when you register for packet data services.

Walkie-Talkie call.

addresses you use to access the Internet with your phone.

Note: If you request equipment-related

transactions on your account, Boost Customer Care may require you to provide specific information about your phone. By pressing m anytime while in My Info, a submenu will appear that includes your phone’s service status, unit information, and phone identification numbers including IMEI, SIM ID, and Serial Number (SN). Please be prepared to supply the representative with this information when requesting these types

of transactions.

Editing My Info

To edit My Info to enter or change the text that appears in My Name:

1 From the main menu, select My Info. 2 Press A under Edit. 3 Select Name. 4 Enter the name you want to appear. See

“Entering Text” on page 30. When you are finished, press O.

You can also edit the information in Line 1, but your changes are only temporary. The next time your phone registers on the network, your actual phone number will reappear in My Info.

My Info

Setting Sending Options

Your phone can send information in My Info to other phones that have this capability.

You can control what portion of the information in My Info is sent and whether it is sent automatically in every Boost you choose to send it.

Information Sent

The information your phone sends always includes My Name and Boost

It may include Line 1 and Carrier IP, depending on how you set your sending options.

To change which fields are sent:

1 From the main menu, select My Info. 2 Press m. 3 Select Send My Info Setup > Info to Send. 4 A checkmark appears next to the fields that will

be sent. To add or remove the checkmark, select the field.

5 When you are finished, press A under Done.

Walkie-Talkie call or only when

Walkie-Talkie number.

Automatic Sending

To control whether your information is sent automatically:

1 From the main menu, select My Info. 2 Press m. 3 Select Send My Info Setup > AutoSend. 4 To set your information to be sent automatically,

set this option to On. -or- To set your information to be sent only when you

choose to send it, set this option to Off.

Using Walkie-Talkie Send

Walkie-Talkie Send lets you exchange My Info and contact information with other phones that have this capability. You do this through Boost Walkie-Talkie calls.

Sending My Info and Contact Information

When you send My Info or contact information using Walkie-Talkie Send, the information you sent appears on the display of the phone you are engaged in the Boost After the call, the information appears on the recent call list of that phone.

Sending My Info

You can control what portion of the information in My Info is sent and whether it is sent automatically in every Boost you choose to send it. See “Setting Sending Options” on page 90.

Tip: When you send My Info, certain

information, such as your email address or fax number, cannot be included. To send complete contact information, create an entry for yourself in Contacts and send.

Walkie-Talkie call with.

Walkie-Talkie call or only when

Sending Information During a Call

1 While in a Boost

Walkie-Talkie, press m.

2 With WT Send My Info highlighted, press O. 3 When Ready to Send appears on the display,

press the Boost

Walkie-Talkie button to send

the information.

Starting a Call by Sending Information 1 From the main menu, select My Info.

2 Press m. 3 With WT Send My Info highlighted, press O. 4 Use the keypad to enter the Boost

Walkie-Talkie number you want to send the information to. -or-

Press A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter.

5 When Ready to Send appears on the display,

press the Boost

Walkie-Talkie button to send

the information.

Sending Contact Information

You can send contact information by selecting a Contacts entry or an item from the recent calls list.

Using Walkie-Talkie Send

Contacts entries that contain only addresses cannot be sent. When Contacts entries are received, they do not include ring tones or pictures.

These items from the recent calls list can be sent:

• Contact information sent from other phones

• Calls to or from numbers store in your Contacts

list

Sending Information During a Call

1 While in a Boost

Walkie-Talkie call, press m.

2 Select Contacts or Recent Calls. 3 Scroll to the Contacts entry or item in the recent

calls list you want to send.

4 When Ready to Send appears on the display,

press the Boost

Walkie-Talkie button to send

the information.

Starting a Call by Sending Information 1 From the Contacts list, scroll to or select the

entry you want to send. -or- From the recent calls list, scroll to or select the

item you want to send.

2 Press m. 3 Select WT Send Contact. 4 Use the keypad to enter the Boost

Walkie-Talkie number you want to send. -or-

Press A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter.

5 When Ready to Send appears on the display,

press the Boost the information.

Walkie-Talkie button to send

Receiving My Info or Contact Information

When you receive My Info or contact information from another phone, an icon appears on the display:

My Info.

Contact information.

To view the information while still in the Boost Walkie-Talkie call:

1 Press m. 2 Select View Contact .

You can also view My Info from other phones on the recent calls list. See “Recent Calls” on page 26.

Voice Records

A voice record is a recording you make with your phone and can play back. You can record notes to yourself when your phone is not in a call or record phone calls when your phone is in a call.

Viewing Voice Records

To view your list of voice records:

1 From the main menu, select Voi c eR eco rd. 2 Scroll to view more voice records.

Voice Records Icons

One of these icons appears next to each voice record:

A voice record made while your phone was

not in a call.

A voice record made while your phone was in

a call.

Filtering by Voice Record Type

You can set your phone to show all voice records, only voice records created when your phone was in a call, or only voice records created when your phone was not in a call.

1 From the main menu, select Voi ceR ec. 2 Press m. 3 Select Filter. 4 Select the option you want:

•All — show all voice records.

•In Call — show only voice records created

when your phone was in a call.

•Normal — show only voice records created when your phone was not in a call.

Tip: You can also press * or # to scroll

through these options while viewing the list of voice records.

Creating Voice Records

Phone Not in a Call

To record a note to yourself:

1 From the main menu, select Record > [New

VoiceR ec] .

Voice Records

2 Say the message you want to record into the

microphone. Tip: To stop recording before you are finished,

press A under Pause. To start recording again, press A under Resume.

3 When you are finished recording, press O. To add to the end of an existing voice record:

1 From the main menu, select Voi c eR eco rd. 2 Scroll to the voice record you want to add to. 3 Press m. 4 Select Add To. 5 When you are finished recording, press O.

Phone in a Call

To record a phone call:

1 While on an active call, press m. 2 Select Record. 3 When you are finished recording, press O.

Note: Recording of phone calls is subject to

applicable laws regarding privacy and recording of phone conversations.

Playing Voice Records

1 From the main menu, select Voi ceR eco rd. 2 Select the voice record you want to play. 3 To stop the voice record while it is playing, press

Tip: To pause or resume, press any key.

Labeling Voice Records

When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label.

1 From the main menu, select Voi ceR eco rd. 2 Scroll to the voice record you want to label. 3 Press A under Label. 4 Enter the label you want to assign. See

“Entering Text” on page 30.

5 Press O.

Locking Voice Records

When you lock a voice record, it cannot be deleted until you unlock it.

1 From the main menu, select Voi ceR eco rd. 2 Scroll to the voice record you want to lock or

unlock.

Deleting Voice Records

3 Press m. 4 Select Lock to lock the message. -or-

Select Unlock to unlock the message.

When a voice record is locked, this icon next to it.

R appears

Deleting Voice Records

Deleting a voice record from the voice record list deletes it from all parts of your phone, including the media center.

Deleting a Voice Record

1 From the main menu, select Voi c eR eco rd. 2 Scroll to the unlocked voice record you want to

delete.

3 Press m. 4 Select Delete. 5 Press O or A under Yes to confirm.

Deleting All Voice Records

1 From the main menu, select Voi c eR eco rd. 2 Scroll to any voice record. 3 Press m. 4 Select Delete All. 5 Press O or A under Yes to confirm.

Managing Memory

To view the amount of memory available for voice records:

1 From the main menu, select Voi ceR eco rd. 2 With [New VoiceRec] highlight, press A under

Memory. -or-

With any voice record highlighted, press m. Select Memory.

To free more memory by deleting all unlocked voice records:

1 From the voice records memory screen, press A

under Delete.

2 Press O or A under Yes to confirm.

Note: Voice Records are stored in your phone

using the same memory space used to store Java applications data, voice records, ringtones, messages, and wallpaper images. Deleting some of these other items frees memory space for voice records.

Java® Applications

Your phone arrives with Java applications installed and ready to run. You can download and install more Java applications.

To download and install more Java applications, go to the BoostLIVE menu option on your phone or visit www.boostmobile.com.

Note: Using Java applications may cause your

phone to use up more battery power than other uses of your phone.

Running Applications

To run an application that has a shortcut on the main menu:

1 From the main menu, select the application or

suite of applications you want to run.

2 If you have selected a suite of applications,

select the application you want to run.

To run an application that does not have a shortcut on the main menu:

1 From the main menu, select Java Apps. 2 Select the application or suite of applications

you want to run.

3 If you have selected a suite of applications,

select the application you want to run.

Tip: If you don’t hear the sounds associated with

the Java application, select Settings > Vol ume and check the volumes of Java Speaker and Java Earpiece.

Suspending Applications

When you suspend an application, it does not stop running. It goes to the background so that you can run another application in the foreground.

To suspend an application:

Press e.

To view your suspended applications:

From the Java menu, select Suspended Apps.

You can have up to 3 applications running at one time — 1 running in the foreground and 2 in the background.

Resuming Applications

You can resume a suspended application at any time. This brings it to the foreground.

1 From the Java menu, select Suspended Apps. 2 Select the application you want to resume.

Ending Applications

To end an application:

1 From the main menu, select Java Apps. 2 If the application you want to end is part of a

suite of applications, select the suite.

3 Scroll to the application you want to end.

Press A under End. -or- If End is not one of your options: Press m. Select

End. Tip: You can also end applications from the

Suspended Ap ps screen.

4 Press A under End.

To end all applications:

1 From the main menu, select Java Apps. 2 Scroll to Suspended Apps. 3 Press m. 4 Select End All. 5 If you want to end all applications without letting

them exit, press A under EndNow. Tip: You can also end applications from the

Suspended Ap ps screen.

Downloading Applications

If you want to run more Java applications, you can download them into your phone.

Check the BoostLIVE menu option on your phone for a catalog of items available for purchase and download.

You can also go to www.boostmobile.com for a selection of Java applications and downloading instructions.

Installing Applications

Before running most application you have downloaded, you must install them.

1 From the main menu, select Java Apps. 2 Select the application or suite of applications

you want to install.

3 If you want to create a shortcut to the Java

application on the main menu: Press A under

Next. Press A under Yes. 4 Press O. 5 Press A under Done.

Java® Applications

About DRM Java Applications

Your phone supports gifting and Tell-A-Friend services for DRM java applications. However, these services may not be offered by Boost Please contact Boost these services.

For more information about DRM items, see “Digital Rights Management (DRM)” on page 102.

for more information about

Deleting Applications

Note: Under certain conditions, some DRM

vendors will not charge you if you download an item multiple times within a given time frame. Please contact the DRM vendor to learn more about their download regulations.

To delete an application:

1 From the main menu, select Java Apps. 2 Scroll to the application you want to delete. 3 Press m. 4 Select Deinstall. 5 Press O or press A under Yes to confirm. 6 When your phone has finished deleting the

application, press A under Done.

To delete all Java applications:

1 From the main menu, select Java Apps. 2 Scroll to Java System. 3 Press m. 4 Select Delete All. 5 Press O or press A under Yes to confirm.

Managing Memory

To view the amount of memory available for Java applications:

1 From the main menu, select Java Apps > Java

System. 2 Press A under Next. 3 To see more memory information, press A

under Next again. Deleting Java applications frees memory.

Note: Java application data is stored in your

phone using the same memory space used to store voice records, ringtones, and wallpaper images. Deleting some of these other items frees memory space for Java applications.

Shortcuts on the Main Menu

When you install an application, you can create a shortcut to the application on the main menu.

To create a shortcut to an application that is already installed:

1 From the main menu, select Settings >

Personalize > Menu Options > Add/Remove Apps. -or-

From the main menu: Press m. Select Main Menu Setup > Add/Remove Apps.

2 Scroll to view the list of Java applications. Any

application that has a shortcut on the main menu has a checkmark next to it.

3 Scroll to the application you want to create a

shortcut for.

4 Press O. 5 Press A under Done.

To remove a shortcut:

1 From the main menu, select Settings >

Personalize > Menu Options > Add/Remove Apps. -or-

From the main menu: Press m. Select Main Menu Setup > Add/Remove Apps.

2 Scroll to view the list of Java applications. Any

application that has a shortcut on the main menu

has a checkmark next to it. 3 Scroll to the application you want to remove the

shortcut for.

4 Press O. 5 Press A under Done.

Java Applications and GPS Enabled

Some Java applications can make use of your phone’s GPS feature to determine the approximate geographical location of your phone. (See “GPS (Global Positioning System) Enabled” on page 104 for more information on the GPS feature.) However, for privacy reasons, you may not always want Java applications to access the location of your phone. Your phone protects your privacy by giving you the option to block all or some Java applications from accessing the location of your phone.

Setting Privacy for All Java Applications

These options control the privacy of all Java applications on your phone:

Java® Applications

• Restricted — No Java or similar software

applications may access the location of your phone. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.

• Unrestricted — All Java applications may access the location of your phone, without notifying you.

• By Permission — When a Java application attempts to access the location of your phone, you are prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.

See “Setting Privacy Options” on page 109 for information on choosing these options.

Granting or Denying Permission

If you choose By Permission, you must grant or deny each Java application access to the location of your phone when the application requests access for the first time. You may be required to grant or deny subsequent requests from the same application, depending on the privacy setting you choose for the individual Java application (see “Setting Privacy for Each Java Application” on page 101).

100

When a Java application requests access the location of your phone, a screen appears informing you.

To deny this request: 1 Press A under Deny. The application does not

access the location of your phone.

2 Select the denying option you want:

•Always — If the application requests access

to the location of your phone again, the request is denied without notifying you.

• For this session — If the application requests access to the location of your phone again before you power off your phone, the request is denied without notifying you.

• Only Once — If the application requests access to the location of your phone again, you are prompted to grant or deny permission.

To grant this request: 1 Press A under Grant. The application accesses

your phone’s location.

2 Select the granting option you want:

•Always — If the application requests access

to the location of your phone again, the request is granted without notifying you.

Java Applications and GPS Enabled

• For this session — If the application

requests access to the location of your phone again before you power off your phone, the request is granted without notifying you.

• Only Once — If the application requests access to the location of your phone again, you are prompted to grant or deny permission.

Setting Privacy for Each Java Application

After a given Java application requests access to the location of your phone for the first time, you have the opportunity to set GPS privacy option for that Java application.

1 From the main menu, select Java Apps. 2 Select the application or suite of applications

you want to set the privacy option for. If the application has requested access to the

location of your phone, m appears when you highlight the application.

3 Press m. 4 Select Permissions. 5 Select the privacy option you want for this

application:

•Always — The application always has permission to access the location of your phone, without notifying you.

•Ask — When the application requests access to the location of your phone, you are prompted to grant or deny permission (see “Granting or Denying Permission” on page

100).

• Never — When the application requests access to the location of your phone, the request is denied without notifying you.

101

Digital Rights Management (DRM)

When you download multimedia content available online, such as Java applications, these items may be subject to DRM restrictions. DRM, or digital rights management, is a system that defines how copyrighted multimedia content can be distributed and used.

DRM limits items to time-based or count-based usage settings. Time-based settings let you use the given item for a specified interval. Examples of time-based settings include being able to use an item for a specified number of days from the date of purchase, a specified number of days from the date that the item is first used, or a specified number of minutes. Count-based settings let you use an item for a specified number of times after you download it or for unlimited use.

Managing Items

Note: Depending on how the third-party vendor

has set rights for the given DRM item, you may be unable to perform some of the following tasks.

102

Viewing License Information

You can check a DRM item’s license to view the following information:

• For time-based items, either the date and time the item is scheduled to expire, or the number of days left

• For count-based items, the number of credits (uses) left or an unlimited use notice

• The name of the item’s vendor

To view the license of a DRM item: 1 Go to the location on your phone that contains

the item you want.

2 Highlight the DRM item you want to view license

information for.

3 Press m. 4 Select License Info.

Renewing DRM Licenses

Note: You can only renew DRM licenses if the

license contains a link to the page where you purchased the item.

1 Go to the location on your phone that contains

the item you want.

2 Highlight the DRM item you want to renew.

Managing Items

3 Press A under Renew or press m. Select

Renew.

4 Select the link to the page where you purchased

the item.

5 Follow the vendor’s instructions for purchasing

an additional license.

Deleting Items

If you delete a DRM item that you purchased from

Boost

from your phone, you will have to

purchase it again to download it.

Note: You cannot delete locked items.

Under certain conditions, third-party vendors will let you download an item multiple times within a given time frame, even if you deleted the item. Please contact the third-party vendor of an item to learn more about the vendor’s download regulations.

To delete an item: 1 Go to the location on your phone that contains

the item you w ant.

2 Highlight the DRM item you want to delete. 3 Press m. 4 Select Delete. 5 If prompted, press A under Yes .

About Expired Items

Most items will continue to display on your phone until you delete them. You can also choose to renew the license for an expired item.

Note: You cannot delete items that are DRM

locked.

GPS (Global Positioning System) Enabled

Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature. For example, GPS location fixes are often difficult to obtain indoors, in covered locations, between high buildings, or in other situations where you have not established a clear broad view of the sky. Also, nearby radio and electronic equipment may block or interfere with reception from these distant satellites. SEE: “IMPORTANT: Things to Keep in

Mind”.

When you make a 911 emergency call, the GPS feature of your phone can help emergency personnel locate you if your phone has adequate access to GPS satellite signals and your emergency response center is equipped to process such information.

104

You can also use the GPS feature to view your approximate location. Location information appears on the phone’s display.

Java applications loaded on your phone can also request your location. If your phone is connected to a laptop computer or similar device, software running on that device can request your location. To protect your privacy, you can control whether these requests are granted.

IMPORTANT: Things to Keep in Mind

If you are using the GPS feature of your phone while driving, please give full attention to driving and to the road.

Where adequate signals from multiple satellites are not available (usually because your GPS

antenna cannot establish a view of a wide area of open sky), the GPS feature of your phone WILL

NOT WORK. Such situations include but are not limited to:

• In underground locations

• Inside of buildings, trains, or other covered vehicles

• Under any other metal or concrete roof or structure

Making an Emergency Call

• Between tall buildings or under dense tree-cover

• Near a powerful radio or television tower

• When your GPS antenna is covered (for example, by your hand or other object) or facing the ground

• In temperature extremes outside the operating limits of your phone

Walking or driving very slowly may also substantially reduce GPS performance.

Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Therefore, in any 911 call, always report the location to the emergency response center if you can and if you cannot, remain on your phone for as long as the emergency response center instructs you.

Even where adequate signals from multiple satellites are available, your GPS feature will only provide an approximate location, often within 150 feet (45 meters) but sometimes much further from your actual location. Advice on how to improve GPS performance is provided in “Enhancing GPS Performance” on page 107.

While the GPS feature of your phone can be a valuable navigational aid, it does not replace the need for careful navigating and good judgment. Never rely solely on one device for navigation. Remember that the accuracy of the location information and the time needed to obtain it will vary depending on circumstances, particularly the ability to receive signals from adequate numbers of satellites.

On emergency calls, your phone uses assistance information from the phone network to improve the speed and accuracy of your phone’s location calculation: if such assistance information becomes unavailable, it may reduce the speed and accuracy of the location calculation.

The satellites used by the GPS feature of your phone are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense GPS user policy and the Federal Radionavigation Plan. These changes may affect the performance of the GPS feature of your phone.

Making an Emergency Call

Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.

+ 60 hidden pages

Motorola Solutions 89FT5845 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual