Motorola T6LL1 User Manual

DRAFT - MOTOROLA CONFIDENTIAL

& PROPRIETARY INFORMATION

DRAFT - MOTOROLA CONFIDENTIAL

& PROPRIETARY INFORMATION

Congratulations

Your Motorola H730 headset is designed for quick
connections, clear calls, and lasting comfort.

We’ve crammed all of the main features of your
headset into this handy guide, and in a matter of
minutes we’ll show you just how easy your headset is
to use.

So go on, check it out.

more information

on the Web: www.motorola.com/support

Caution: Before using your headset for the first
time, please read the important Safety, Regulatory
& Legal information at the back of this guide (page

15).

1Congratulations

DRAFT - MOTOROLA CONFIDENTIAL

& PROPRIETARY INFORMATION

Yo u r h e a d s e t

the important parts

Call
Button

Microphone

Volume

Button

Micro USB

Charging

Connector

Earhook

2 Your headset

Volume

Button

Status
Light

Microphone

Boom

DRAFT - MOTOROLA CONFIDENTIAL

& PROPRIETARY INFORMATION

Charge it

let’s get you up and running

Indicator Light

Red/Purple - charging
Blue - fully charged

While your headset is charging, you won’t be able to
use it.

Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling
facility. Any attempt to remove or replace your battery
will damage your headset.

3Charge it

DRAFT - MOTOROLA CONFIDENTIAL

& PROPRIETARY INFORMATION

Basics

Hinge pinEar hook

a few essentials to get you started

Tu r n o n & off

To turn on/off your headset, flip the boom to the open
(extended)/closed (folded under the headset body)
position.

Wear it

Open the boom, flex the earhook
and loop it over your ear.

Make sure the speaker aligns with
your ear canal.

Change for left ear use

Open the boom and earhook
and gently lift top of the
earhook up and off, flip the
headset over, and then hook
bottom of the earhook onto
the lower hinge pin and lift top
of the earhook up and on to
the upper hinge pin.

4 Basics

DRAFT - MOTOROLA CONFIDENTIAL

& PROPRIETARY INFORMATION

Pair & connect

connect and go

Note: The voice prompts are only in English.

Pair & connect with your phone

1 Turn off any Bluetooth® devices previously paired

with your headset.

2 Turn on the Bluetooth feature on your phone.

3 Turn on your headset (see “Turn on & off” on

page 4).

4 Put the headset on your ear (see “Wear it” on

page 4).

The status light is steadily lit in blue and you hear
“ready to pair”.

5 Follow the voice prompts to connect your phone to

your headset.

Note: When prompted for the passkey, enter 0000.

When your headset successfully pairs with your
phone, you hear “pairing complete”.

For daily use, make sure your headset is turned on,
and your phone’s Bluetooth feature is on. Your headset
and phone will connect automatically.

5Pair & connect

DRAFT - MOTOROLA CONFIDENTIAL

& PROPRIETARY INFORMATION

Pair & connect a second phone (optional)

1 Turn off first phone and any other Bluetooth devices

previously paired with your headset.

2 Turn your headset off (see “Turn on & off” on

page 4).

3 Turn on the Bluetooth feature on your phone.

4 Put the headset on your ear.

5 Turn on your headset.

The status light becomes steadily lit in blue and you
hear “ready to pair”.

6 Follow the voice prompts to connect your phone to

your headset.

Note: When prompted for the passkey, enter 0000.

When your headset successfully pairs with your
phone, you hear “pairing complete”.

To connect to both phones, turn on both phones and
then turn your headset off and back on again. When
you hear “phone 1 connected” and “phone 2
connected” you’re ready to go. The last paired phone
(your second phone) is your primary phone (or “phone
1”) for voice dial functionality.

6 Pair & connect

DRAFT - MOTOROLA CONFIDENTIAL

& PROPRIETARY INFORMATION

Test your connection

1 Place the headset on your ear.

2 On your phone, dial a phone number and press the

Call/Send key.

If your phone and headset are successfully connected,
you hear ringing on the headset.

7Pair & connect

DRAFT - MOTOROLA CONFIDENTIAL

& PROPRIETARY INFORMATION

Calls

it’s good to talk

Note: Some features are phone/network dependent.

Note: The voice prompts are only in English.

To .. .

answer call Press the Call button.

reject call Press and hold a Volume button

make a voice
dial call

redial last call Press and hold the Call button until

mute or
unmute a call

end a call Press the Call button.

answer
second
incoming call

reject second
incoming call

Tip: When connected to two phones, voice prompts
help manage call functions such as voice dial, redial,
and end call. Follow the voice prompts to execute a
function on the desired phone.

8 Calls

until you hear a tone

Press the Call button and you hear
a tone.

you hear a tone.

Press both Volume buttons and you
hear “mute on” or “mute off”.

Press the Call button.

Press and hold a Volume button
until you hear a tone.