Motorola T5ZP1 Users manual
APPLICANT: MOTOROLA, INC. FCC ID: IHDT5ZP1
INSTRUCTION MANUAL
The following is a draft copy of the instruction manual.
Exhibit 8
Modulous.book Page i Friday, February 25, 2000 4:19 PM
Welcome
Thank you for choosing your
Motorola phone from a global
leader in communications
technology. All Motorola digital
cellular phones are designed
and manufactured to meet
Motorola’s rigorous
specifications and world-class
quality standards. During
development, our laboratory
testing team took your cellular
phone through rigorous
durability tests including
temperature, humidity, shock,
dust, vibration, and drop tests—
and the phone still worked!
We are confident that the phone you purchased will
meet your own exacting standards. Enjoy your
Motorola phone.
Modulous.book Page ii Friday, February 25, 2000 4:19 PM
Contents
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . v
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Phone Overview . . . . . . . . . . . . . . . . . . . . . . . . 10
Understanding the Guide. . . . . . . . . . . . . . . . . 11
Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . 12
About Your Batteries . . . . . . . . . . . . . . . . . . . . 12
Installing and Removing a Battery . . . . . . . . . 13
Checking Battery Levels . . . . . . . . . . . . . . . . . 14
Charging Batteries . . . . . . . . . . . . . . . . . . . . . . 15
Using the Phone . . . . . . . . . . . . . . . . . . . . . . . . . 17
Turning the Phone On and Off . . . . . . . . . . . . . 17
Reading the Indicators . . . . . . . . . . . . . . . . . . 18
Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . 19
Viewing Your Phone Number . . . . . . . . . . . . . . 19
Placing a Call . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . 20
Switching Between Digital and
Analog Modes . . . . . . . . . . . . . . . . . . . . . . . . . 21
Redialing a Number . . . . . . . . . . . . . . . . . . . . . 21
Controlling Volume . . . . . . . . . . . . . . . . . . . . . . 22
Using Phone Memory . . . . . . . . . . . . . . . . . . . . 23
Storing Names and Numbers . . . . . . . . . . . . . 23
Recalling by Name. . . . . . . . . . . . . . . . . . . . . . 25
Recalling by Memory Location . . . . . . . . . . . . 25
Clearing a Phone Memory Entry. . . . . . . . . . . . 26
Shortcuts for Recalling Phone Book Entries . . 26
Making Notes on the Scratchpad . . . . . . . . . . 27
Using the Menu System . . . . . . . . . . . . . . . . . . . 28
Introducing the Menu Features . . . . . . . . . . . . 28
Navigating the Menu . . . . . . . . . . . . . . . . . . . . 29
Road Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ii
Modulous.book Page iii Friday, February 25, 2000 4:19 PM
Managing Recent Calls . . . . . . . . . . . . . . . . . . .30
Road Map for Recent Calls . . . . . . . . . . . . . . .30
About Recent Calls . . . . . . . . . . . . . . . . . . . . . .30
Reviewing Received Calls . . . . . . . . . . . . . . . .32
Reviewing Dialed Calls . . . . . . . . . . . . . . . . . . .32
Clearing Caller Line ID . . . . . . . . . . . . . . . . . . .33
Managing the Phone Book . . . . . . . . . . . . . . . .34
Road Map for Phone Book . . . . . . . . . . . . . . . .34
Storing Names and Numbers . . . . . . . . . . . . . .35
Editing a Memory Location . . . . . . . . . . . . . . . .40
Viewing All Entries in Alphabetical Order . . . . .41
Recalling an Entry by Name . . . . . . . . . . . . . . .42
Recalling an Entry by Location . . . . . . . . . . . .42
Assigning an Individual Ring Style to a
Phone Book Entry . . . . . . . . . . . . . . . . . . . . . . .43
Timing Y our Calls . . . . . . . . . . . . . . . . . . . . . . . .44
Road Map for Call Timers . . . . . . . . . . . . . . . . .44
Viewing the Individual Call Timer . . . . . . . . . . .45
Viewing the Resettable Call Timer . . . . . . . . . .45
Viewing the Cumulative Timer . . . . . . . . . . . . .46
Resetting the Timer . . . . . . . . . . . . . . . . . . . . .46
Displaying the Individual Call Timer
Automatically . . . . . . . . . . . . . . . . . . . . . . . . . .46
Setting the One-Minute Audible Timer . . . . . . .47
Setting the Repeating Audible Timer . . . . . . . .47
Setting the Single Timer . . . . . . . . . . . . . . . . . .48
Adjusting T one Controls . . . . . . . . . . . . . . . . . .49
Road Map for Tone Controls . . . . . . . . . . . . . . .49
Selecting a Ring Style . . . . . . . . . . . . . . . . . . .50
Turning Keypad Tones On and Off . . . . . . . . . .50
Turning Scratchpad Tones On and Off . . . . . . .51
Using Lock/Security Features . . . . . . . . . . . . . .52
Road Map for Lock Security . . . . . . . . . . . . . . .52
Activating Voice Privacy . . . . . . . . . . . . . . . . . .53
Locking/Unlocking Your Phone. . . . . . . . . . . . .54
Activating Priority Calling . . . . . . . . . . . . . . . . .55
Viewing and Changing the Lock Code . . . . . .56
Restricting Call Placement . . . . . . . . . . . . . . . .57
Resetting All Options . . . . . . . . . . . . . . . . . . . .59
Clearing All Stored Information . . . . . . . . . . . .59
iii
Modulous.book Page iv Friday, February 25, 2000 4:19 PM
Customizing Phone Options . . . . . . . . . . . . . . 60
Road Map for Phone Options . . . . . . . . . . . . . 60
Activating Pager Mode . . . . . . . . . . . . . . . . . . 61
Selecting Preferred Call Mode . . . . . . . . . . . . . 62
Viewing Your Own Number. . . . . . . . . . . . . . . . 63
Switching Between Numbers . . . . . . . . . . . . . 63
Selecting a Cellular System . . . . . . . . . . . . . . 64
Reviewing Feature Settings . . . . . . . . . . . . . . . 65
Activating Multiple Key Answer . . . . . . . . . . . . 66
Activating Automatic Answer . . . . . . . . . . . . . . 67
Displaying System Identification . . . . . . . . . . . 68
Selecting a Language . . . . . . . . . . . . . . . . . . . 68
Selecting a Network . . . . . . . . . . . . . . . . . . . . . . 69
Road Map for Network Selection . . . . . . . . . . . 69
Selecting a Non-Public Network . . . . . . . . . . . 70
Selecting a Public Network . . . . . . . . . . . . . . . 71
Specifying a Default Search. . . . . . . . . . . . . . . 72
Viewing All Non-Public Networks . . . . . . . . . . 72
Using Voice Mail and Text Messages . . . . . . . . 73
Road Map for Message Center . . . . . . . . . . . . 73
Voice Mail Alerts . . . . . . . . . . . . . . . . . . . . . . . 74
Dialing Voice Mail . . . . . . . . . . . . . . . . . . . . . . 74
Reading Text Messages . . . . . . . . . . . . . . . . . 75
Editing the Voice Mail Number . . . . . . . . . . . . 80
Setting the Scrolling Speed . . . . . . . . . . . . . . . 81
Reference Information . . . . . . . . . . . . . . . . . . . . 82
Accessory Options . . . . . . . . . . . . . . . . . . . . . 82
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 84
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Patent Information . . . . . . . . . . . . . . . . . . . . . . . 94
iv
•
•
•
•
Modulous.book Page v Friday, February 25, 2000 4:19 PM
Safety Information
Important:
wireless handheld phone.
Read this information before using your
Exposure to Radio Frequency Signals
Your wireless handheld portable telephone is a low
power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF)
signals.
In August 1996, The Federal Communications
Commission (FCC) adopted RF exposure guidelines
with safety levels for handheld wireless phones. Those
guidelines are consistent with safety standards
previously set by both U.S. and international
standards bodies:
American National Standards Institute (ANSI)
IEEE. C95. 1-1992
National Council on Radiation Protection and
Measurement (NCRP). Report 86
International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1996
Ministry of Health (Canada), Safety Code 6
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific literature.
For example, over 120 scientists, engineers, and
physicians from universities, government health
agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC
guidelines (and those standards). For additional
information concerning exposure to radio frequency
signals, see the statement by the FDA at the end of
this user guide.
v
•
•
•
Modulous.book Page vi Friday, February 25, 2000 4:19 PM
To maintain compliance with FCC RF exposure
guidelines, if you wear a handset on your body, use
the Motorola-supplied or approved carrying case,
holster, or other body-worn accessory. If you do not
use a body-worn accessory, ensure the antenna is at
least one inch (2.5 centimeters) from your body when
transmitting. Use of non-Motorola accessories may
violate FCC RF exposure guidelines.
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone andmay violate
FCC regulations.
Phone Operation
Normal Operation
Hold the phone as you would any other telephone,
with the antenna pointed up and over your shoulder.
Tips on Efficient Operation
Observe the following guidelines to operate your
phone most efficiently.
Extend your antenna fully, if applicable.
Do not touch the antenna unnecessarily when
the phone is in use. Contact with the antenna
affects call quality and may cause the phone
to operate at a higher power level than
otherwise needed.
vi
•
•
•
Modulous.book Page vii Friday, February 25, 2000 4:19 PM
Batteries
Caution: All batteries can cause property damage,
injury, or burns if a conductive material, such as
jewelry, keys or beaded chains, touches exposed
terminals. The material may complete an electrical
circuit and become quite hot. To protect against
such unwanted current drain, exercise care in
handling any charged battery, particularly when
placing it inside your pocket, purse, or other
container with metal objects. When the battery is
detached from the phone, your batteries are
packed with a protective battery cover; please use
this cover for storing your batteries when not in use.
Driving
Check the laws and regulations on the use of wireless
telephones in the areas where you drive. Always obey
them. Observe the following guidelines when using
your phone while driving.
Give full attention to driving--driving safely is
your first responsibility.
Use hands-free phone operation, if available.
Pull off the road and park before making or
answering a call if driving conditions so require.
Electronic Devices
Most modern electronic equipment is shielded from
RF signals. However, certain equipment may not be
shielded against the RF signals from your wireless
phone.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six inches
(6") be maintained between a handheld wireless
phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the independent
research by and recommendations of Wireless
Technology Research.
vii
•
•
•
•
Modulous.book Page viii Friday, February 25, 2000 4:19 PM
Persons with pacemakers:
should ALWAYS keep the phone more than six
inches from their pacemaker when the phone is
turned ON
should not carry the phone in a breast pocket
should use the ear opposite the pacemaker to
minimize the potential for interference
should turn the phone OFF immediately if you
have any reason to suspect that interference is
taking place
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may want to consult your hearing aid manufacturer to
discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.
T urn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. Y ou should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted
notices so require.
viii
Modulous.book Page ix Friday, February 25, 2000 4:19 PM
Aircraft
Switch OFF your phone before boarding an aircraft.
Airline regulations prohibit using your phone while in
the air. Check and comply with the policy of your
airline regarding the use of your phone while the
aircraft is on the ground.
Blasting Areas
To avoid interfering with blasting operations, turn your
phone OFF when in a "blasting area" or in areas
posted: "Turn off two-way radio." Obey all signs and
instructions.
Potentially Explosive Atmospheres
Turn your phone OFF, do not remove your battery
when you are in any area with a potentially explosive
atmosphere, and obey all signs and instructions.
Sparks from your battery in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include:
fueling areas such as gasoline stations; below deck
on boats; fuel or chemical transfer or storage facilities;
areas where fuel odors are present (for example, if a
gas/propane leak occurs in a car or home); areas
where the air contains chemicals or particles, such as
grain, dust, or metal powders; and any other area
where you normally would be advised to turn off your
vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. Do NOT place
objects, including both installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air bag inflates, serious
injury could result.
ix
Modulous.book Page 10 Friday, February 25, 2000 4:19 PM
Overview
Phone Overview
See the inside front cover of this guide for a
diagram of the components described below.
Antenna —Provides superior connectability. Does
not extend.
Earpiece —Ultra-compact phone speaker.
Accessory Connector Port —Connects to an
external power supply and vehicular accessories.
(
Headset Jack —Connects to an optional headset.
Microphone —Positioned for convenient
conversation.
Function Keys
p
—Turns the phone On and Off.
f
—Acts as a “shift” key to access secondary
functions of other keys.
r
—Recalls phone numbers from memory.
s
—Stores phone numbers into memory.
c
—Clears characters from the screen.
e
—Ends phone calls.
S
—Places or answers calls.
a
and menu features. Also used to adjust keypad,
earpiece, and ringer volume.
m
digital messages and voice mail messages.
—Used to scroll through memory entries
Message Center Button) —Provides access to
10
Modulous.book Page 11 Friday, February 25, 2000 4:19 PM
Understanding the Guide
Key Presses
In this guide, keys are represented by symbols. A
sample sequence of key presses is shown below:
f
0
7
c
This sequence indicates that you should press the
f
,
0
,
7
, and c keys, in sequence, not
simultaneously.
Prompts and Messages
When you press a key, your phone displays either a
prompt that guides you to the next action or a
message confirming that your action is complete.
Prompts and messages are represented in this
guide in LCD style, for example: Reset Timer.
Overview
Short Cuts and Tips
Look in the margins of this guide for short cuts,
useful hints, and other ways to improve your
phone’s performance. These are especially helpful
for experienced Motorola Users, who can find many
of the same key sequences used with other
Motorola models.
11
Modulous.book Page 12 Friday, February 25, 2000 4:19 PM
Using the Battery
About Your Batteries
Your phone uses Nickel Metal Hydride (NiMH)
batteries in either AAAL or AA sizes.
Note: In an emergency, you can use four AA
alkaline batteries for 5-10 minutes of talk time.
Battery T alk-Time and Standby-Time
T alk-time
before the battery is fully discharged.
is the time your phone is on but not used for talking.
The following table shows ranges for battery talktimes and standby times.
Battery
is the time you can talk on your phone
Digital Mode Analog Mode
Talk
(up to)
Standby
(up to)
Standby-time
Talk
(up to)
Standby
(up to)
12
AAAL NiMH
(700mAH) 100 min. 100 hrs. 60 min. 16 hrs.
AA NiMH
(1200mAH) 180 min. 180 hrs. 100 min. 27 hrs.
Notes:
• Talking on the phone uses more power than
leaving it idle. The more power used for
talking, the less you’ll have for standby-time,
and vice-versa.
• All times are approximate and depend on the
battery used, network configuration, signal
strength, and features selected.
• Talk and standby times are lower in Analog
mode. Your phone operates more efficiently
in Digital mode.
Modulous.book Page 13 Friday, February 25, 2000 4:19 PM
Storing and Disposing of Batteries
To prolong battery life, do not expose a battery to
temperatures below -10°C (14°F) or above 45°C
(113°F). Do not leave your phone in your car.
To dispose of batteries, check with your local
recycling center for a nearby battery recycler.
Never dispose of batteries in a fire.
Caution: To prevent injuries or burns, do not allow
metal objects to contact or short-circuit the battery
terminals.
Installing and Removing a
Battery
Installing a Battery
1. Press down on the tab at
the top of the battery
cover.
Batteries
2. Slide the cover back, and
remove it from the phone.
3. Insert the top end of the
battery into the
compartment, and push it
against the springs.
(The battery’s black
plastic “foot” should be at
the other end, facing left.)
4. Fit the other end of the battery into the
compartment.
13
Modulous.book Page 14 Friday, February 25, 2000 4:19 PM
5. Insert the tabs on
the underside of the
cover into the slots
on the edges of the
compartment.
6. Lower the cover into
place, then slide it forward until it snaps shut.
Removing a Battery
1. Press p to turn your phone off.
2. Press down on the tab at
the top of the battery cover.
3. Slide the cover back, and
remove it from the phone.
14
4. Grip the battery at its
bottom end, pull straight up,
then remove the battery.
Checking Battery Levels
Battery Level Indicator
To display your phone’s battery charge level:
f 4.
Press
The following is displayed:
The more segments filled on the fuel gauge,
the greater the charge.
Modulous.book Page 15 Friday, February 25, 2000 4:19 PM
Low Battery Warning
When the battery charge is low, the phone signals
you in three ways:
• Low Battery is displayed.
• No bar segments are highlighted.
High
Batteries
• A short tone plays periodically.
To confirm low battery signals:
Press f 4.
Charging Batteries
Y our phone’ s internal charger enables you to use an
AC adapter or vehicle power adapter to charge
batteries installed in your phone.
Note: Your phone’s internal charger is intended
only for charging batteries. It does not provide
power directly to the phone.
To charge:
1. Plug the AC adapter into the
connector on the side of the
phone.
or
Plug the vehicle power
adapter into the connector
at the bottom of the phone.
2. Plug the AC adapter into an electrical outlet.
or
Low
Tip:
You can still
place and
answer calls
while using the
internal
charger, as
long as the
phones
batteries have
at least a small
charge.
Remember that
charging takes
more time
when you are
actively using
the phone. To
place the
phone in
charger-only
mode, press
p
once.
Plug the vehicle power adapter into a vehicle
cigarette lighter.
In both cases, you hear a beep, and the
battery icon flashes.
15
Modulous.book Page 16 Friday, February 25, 2000 4:19 PM
Battery Charging Tips
To ensure maximum battery life:
• Always use Motorola approved battery
chargers.
• When charging, keep the battery at or near
room temperature.
• When you don’t intend to use a battery for a
while, store it uncharged in a cool, dark, dry
place, such as a refrigerator.
• Do not leave a NiMH battery connected to
any charger for longer than 24 hours.
A new NiMH battery can require several full charge/
discharge cycles to reach its optimum performance
level. After this initial series of charge/discharge
cycles, recharge the battery at your convenience.
Quick Change Power Source
The quick change feature enables you to switch
power sources during an active call without losing
the connection. If you hear a low-battery warning
during a call, plug in the Vehicle Power Adapter or
the AC adapter.
16
Charge Times
The following table shows the time required to
charge each battery type to a 90% power level:
Battery T ype
NiMH AAAL (700 mAH) 4 hrs.
NiMH AA (1200 mAH) 6 hrs.
When the battery reaches 90%, it slow charges until
it is fully charged. It is normal for batteries to
become warm during charging.
If the phone is turned on while batteries are
charging, charge times will be longer than those
listed above.
Charge Time—
Internal Charger
Modulous.book Page 17 Friday, February 25, 2000 4:19 PM
Using the Phone
Turning the Phone On and
Off
1. T o turn the phone on, press and hold p until
the display appears and you hear a tone.
2. Press and hold p again to turn the phone
off. Powering off will be displayed, and you
will hear a tone.
What Y ou Will See
When you turn on your phone, it performs a self-test
to let you know it is operational. When the test is
completed, the display shows:
• one of several possible greetings, such as:
- the name of your Service Provider
or
- an indication of local or non-local cover-
age area
• your phone number
• the Digital or Analog icon
Using the Phone
17
Modulous.book Page 18 Friday, February 25, 2000 4:19 PM
Reading the Indicators
Signal Strength Indicator
The Signal Strength Indicator (SSI) indicates the
High
Low
strength of your phone’s connection with the local
cellular system. A strong signal increases your
chances of placing and receiving calls. Low signal
strength can occur in a fringe area of the cellular
system. Buildings, tunnels, and bad weather can
block or interfere with reception.
Digital Indicator
This indicator appears when you are in a digital
coverage area.
18
Analog Indicator
This indicator appears when you are in an analog
coverage area.
In Use Indicator
This indicator appears when a call is in progress.
In-Building Indicator
This indicator lights when the phone accesses an
In-Building Cellular System or other non-public
system.
No Service Message
When you are outside the range of a cellular
system, the No Service message indicates that you
cannot place or receive calls.
Modulous.book Page 19 Friday, February 25, 2000 4:19 PM
SMS Message Waiting Indicator
The Short Message Service (SMS) Message
Waiting Indicator is displayed when the phone
receives a message. The symbol flashes when your
message storage area is full. (This is an optional,
network- and subscription-dependent feature that
is not available in all areas.)
Voice Message Waiting Indicator
This indicator is displayed when your Voicemail has
received a message. (This is an optional, networkand subscription-dependent feature that is not
available in all areas.)
Battery Level Indicator
This indicator shows your battery’s charge. The
more segments you see, the greater the charge.
The phone alerts you to a low charge in three ways:
• No bar segments are highlighted.
Using the Phone
High
• Low Battery is displayed.
• A short tone plays periodically.
Standby Mode
To conserve energy, your phone may turn off its
lights in standby mode. The display returns the next
time you press a key.
Viewing Your Phone Number
Press ‰# for a quick look at your phone
number.
Low
19
Modulous.book Page 20 Friday, February 25, 2000 4:19 PM
Placing a Call
To place a call:
1. Press and hold p until the display lights
and you hear an alert.
2. Enter the number you want to call.
If you make a mistake while entering the
number:
• Press c to erase one digit at a time.
• Press and hold c to clear the entire
entry.
You can dial phone numbers with up to 32
digits, but only the last 20 appear in the
display. (Press r to see the entire number.)
3. Press S to place the call.
Y ou will hear a two-tone alert (if keypad tones
are turned on) and see Dialing XXXXXXX.
20
Ending a Call
To end a call:
Press e.
Receiving a Call
Your phone must be powered on to receive calls.
To answer a call:
Press S when the phone rings.
Unanswered Call Indicator
When you cannot take a call, your phone counts
your unanswered calls and displays Missed XX
Calls, where
Terminating the Ring Indicator
To terminate the ring indicator, press either of the
volume keys during the ring cycle.
XX
is the number of missed calls.
Modulous.book Page 21 Friday, February 25, 2000 4:19 PM
Switching Between Digital
and Analog Modes
To switch from digital to analog mode, or from
analog to digital during a call:
Press f 2.
Depending upon availability, your phone selects the
TDMA digital system or the analog system.
Notes:
• This feature is not available on all models of
this phone.
• Once you switch from digital to analog mode,
you can not switch back to digital mode until
you turn your phone off and on again.
• When you switch from digital to analog mode,
you may still see the digital indicator while
the phone is idle (that is, not in an active call).
Using the Phone
Redialing a Number
Automatic Redial
Sometimes you may not be able to complete a call
because the cellular system is busy. When this
happens, you will hear a fast busy signal.
With Automatic Redial, your phone tries
continuously to complete the call for the next four
minutes. When it makes a connection, the phone
alerts you with rings that are half as long as those
for a new incoming call. Y ou can begin talking when
the other party answers.
If you hear a fast busy signal:
1. When you see Redial Call?, press S to
redial.
2. If the call does not complete after four
minutes, press S to continue the attempt.
You will see Redial.
21
Modulous.book Page 22 Friday, February 25, 2000 4:19 PM
If you hear an ordinary busy signal:
1. Press e to hang up.
2. Press S to redial the busy number. You will
see Dialing XXXXXXX.
Controlling V olume
Adjusting V olume
Use the scroll buttons (a) to adjust
earpiece, keypad, and ringer volume. When you
press these keys, the phone’s speaker
demonstrates the current volume level.
To adjust earpiece and keypad volume:
Press a to raise or lower the volume.
To adjust the ringer volume:
1. Press f.
2. Press a to raise or lower the ringer
volume.
22
Muting the Microphone
For privacy during a call, mute the microphone. Y ou
can hear the person on the other end, but he or she
cannot hear you.
1. Press f 6 to mute the microphone. You
will see Mute.
2. Press f 6 again to resume normal
conversation.
Modulous.book Page 23 Friday, February 25, 2000 4:19 PM
Using Phone Memory
Each phone number in your phone book is stored in
a
memory location
For easy recall, store related numbers in groups. If
you store the numbers you call most in locations 0109, you can use Turbo Dial
pressing a single key. (See “Using the Turbo Dial
Function” on page 27 for details.)
You can also store a name with a phone number.
Later, you can enter that name to recall the number.
Storing Names and Numbers
How to Store Phone Numbers
1. Enter the phone number you want to store.
2. Press s to begin storing. The phone
displays Location __.
numbered 01-99.
®
to call them by
®
Using Memory
3. Enter the two-digit memory location where
you want the sequence stored.
or
Press * to store the sequence in the first
available location.
or
Enter the first digit of a memory location, then
press * to store the sequence in the first
available location beginning with that digit.
You will see Alpha Or
4. Enter a name to identify the phone number.
(See the following section for details on
entering names.)
5. Press s when you finish entering the name.
Y our phone confirms your entry by displaying
the information you stored.
Sto.
23
Modulous.book Page 24 Friday, February 25, 2000 4:19 PM
How to Enter Letters and Numbers
When the display shows Alpha Or Sto, you can
press the numeric keys one or more times to enter
any letter or number in the alphabet. Use the letters
printed on each key as a guide. For example, press
2 to enter “A,” “B,” “C,” or “2” as shown:
How to Enter a Name
Tip:
Press
a
first, to toggle
between upper
and lower case
letters.
1. To enter a letter, press the appropriate key as
many times as needed. Enter punctuation by
pressing 1 as many times as indicated by
the chart below. Pressing 1 a single time
produces a single space.
2345678910
1
press 1 time to insert an “A”
press 2 times to insert a “B”
press 3 times to insert a “C”
press 4 times to insert a “2”
24
The cursor advances automatically to the
next space after you enter a letter or after
three seconds of inactivity. Press # to
advance the cursor to the next space.
2. Press * (to backspace) or
letter if you make an error.
3. Press s when you finish entering the name.
Y our phone confirms your entry by displaying
the information you stored.
c to erase a
Modulous.book Page 25 Friday, February 25, 2000 4:19 PM
Recalling by Name
You can recall a stored name alphabetically and
immediately call the corresponding number:
1. Press f 3 to enter your name directory.
2. Press a to scroll to the name you
want.
or
Enter the first letter of the name you want to
recall. The phone displays the first name in
the phone book that begins with that letter. If
the phone book has no entries beginning with
that letter , No X s is displayed (where
letter you entered).
When your phone finds the name, it displays
it along with its memory location and
corresponding phone number.
3. Press S to call the number.
X
is the
Recalling by Memory
Location
You can recall stored names and numbers by their
memory location:
1. Press r.
2. Enter the two-digit memory location of the
phone number you want.
3. Press S to call the number you selected.
Using Memory
25
Modulous.book Page 26 Friday, February 25, 2000 4:19 PM
Clearing a Phone Memory
Entry
Clearing an Entry by Name
1. Recall by name the entry that you want to
erase. (See “Recalling by Name” on
page 25.)
2. Press c to clear the entry. You will see
Clear Entry?.
3. Press s to confirm that you want to erase
the entry.
The numbered location of the cleared entry is
shown in the display.
Clearing an Entry by Location Number
1. Recall by location number the entry that you
want to erase. (See “Recalling by Memory
Location” on page 25.)
26
2. Press c to clear the display.
3. Press s and the location you want to clear.
You will see XX Full Change?
4. Press s to confirm that you want to erase
the entry.
Shortcuts for Recalling
Phone Book Entries
Using Speed Dial
If you know the memory location of the number you
want to call, use Speed Dial to save key presses:
1. Enter the two-digit memory location (01-99).
2. Press S to place the call.
Modulous.book Page 27 Friday, February 25, 2000 4:19 PM
Using the Turbo Dial® Function
The Turbo Dial® function enables you to dial any
number stored in locations 01-09 by pushing a
single button:
Press and hold a number 1 through 9,
and your call is placed. You will hear a twotone alert afterwards.
The Priority Call feature provides quick access to
any number stored in location 01. See “Activating
Priority Calling” on page 55.
Making Notes on the
Scratchpad
Your phone has a built-in scratchpad for making
quick notes. The scratchpad “remembers” the last
phone number shown on the display.
Entering a Number in the Scratchpad
During an active call, if the other party gives you
another number to call, you can enter the number
on the scratchpad and dial that number later.
1. Enter the number on the keypad. (The person
on the line can hear tones as you dial.)
2. Press e to end the current call.
3. Press S to call the number you saved on
the Scratchpad.
Storing Numbers During a Call
You can also store numbers during a call:
Using Memory
1. Enter the number on the keypad. (The person
on the line can hear tones as you dial.)
2. Press s and continue storing with step 3 in
“Storing Names and Numbers” on page 23.
27
Modulous.book Page 28 Friday, February 25, 2000 4:19 PM
Using the Menu System
Your Motorola cellular phone includes many
features to help you be more productive. The
phone’s user-friendly menu system helps you find
what you need quickly and easily.
In this chapter you will learn:
• the main menu features
• how to navigate through the menus
• how to read a menu road map
Introducing the Menu
Features
As you scroll through the menu system, you will see
the following icons, each representing a high-level
menu.
28
Recent Calls
Tone Control
Phone Book
Lock Secure
Timers
Phone Options
Loading...