The Motorola products described in this manual may include copyrighted
Motorola and third-party software stored in semiconductor memories or
other media. Laws in the United States and other countries preserve for
Motorola and third-party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to distribute or
reproduce the copyrighted software. Accordingly, any copyrighted software
contained in the Motorola products may not be modified, reverseengineered, distributed, or reproduced in any manner to the extent allowed
by law. Furthermore, the purchase of the Motorola products shall not be
deemed to grant either directly or by implication, estoppel, or otherwise,
any license under the copyrights, patents, or patent applications of
Motorola or any third-party software provider, except for the normal, nonexclusive, royalty-free license to use that arises by operation of law in the
sale of a product.
Specific Absorption Rate Data
Additional Health and Safety Information
Warranty
Product Registration
RF Energy Interference
Export Law Assurances
Wireless: The New Recyclable
Index
Wireless Phone Safety Tips
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING YOUR PHONE.
The information provided in this document supersedes the general safety
information in user guides published prior to December 1, 2002.
Exposure To Radio Frequency (RF) Energy
Your phone contains a transmitter and a receiver. When it is ON, it
receives and transmits RF energy. When you communicate with your
phone, the system handling your call controls the power level at which
your phone transmits.
Your Motorola phone is designed to comply with local regulatory
requirements in your country concerning exposure of human beings to RF
energy.
Operational Precautions
To assure optimal phone performance and make sure human exposure to
RF energy is within the guidelines set forth in the relevant standards,
always adhere to the following procedures.
External Antenna Care
Use only the supplied or Motorola-approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage the
phone.
Do NOT hold the external antenna when the phone is IN USE. Holding
the external antenna affects call quality and may cause the phone to
operate at a higher power level than needed. In addition, use of
unauthorized antennas may result in non-compliance with the local
regulatory requirements in your country.
6
Phone Operation
When placing or receiving a phone call, hold your phone as you would a
wireline telephone.
Body-Worn Operation
To maintain compliance with RF energy exposure guidelines, if you wear a
phone on your body when transmitting, always place the phone in a
Motorola-supplied or approved clip, holder, holster, case, or body harness
for this phone, if available. Use of accessories not approved by Motorola
may exceed RF energy exposure guidelines. If you do not use one of the
body-worn accessories approved or supplied by Motorola, and are not
using the phone held in the normal use position, ensure the phone and its
antenna are at least 1 inch (2.5 centimeters) from your body when
transmitting.
Data Operation
When using any data feature of the phone, with or without an accessory
cable, position the phone and its antenna at least 1 inch (2.5 centimeters)
from your body.
Approved Accessories
Use of accessories not approved by Motorola, including but not limited to
batteries and antenna, may cause your phone to exceed RF energy
exposure guidelines. For a list of approved Motorola accessories, visit our
website at
RF Energy Interference/Compatibility
Note:
interference from external sources if inadequately shielded, designed, or
otherwise configured for RF energy compatibility. In some circumstances
your phone may cause interference.
Facilities
Turn off your phone in any facility where posted notices instruct you to do
so. These facilities may include hospitals or health care facilities that may
be using equipment that is sensitive to external RF energy.
www.Motorola.com
Nearly every electronic device is susceptible to RF energy
.
7
Aircraft
When instructed to do so, turn off your phone when on board an aircraft.
Any use of a phone must be in accordance with applicable regulations per
airline crew instructions.
Medical Devices
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
6 inches (15 centimeters) be maintained between a handheld wireless
phone and a pacemaker.
Persons with pacemakers should:
•
ALWAYS keep the phone more than 6 inches (15 centimeters) from
your pacemaker when the phone is turned ON.
•
NOT carry the phone in the breast pocket.
•
Use the ear opposite the pacemaker to minimize the potential for
interference.
•
Turn OFF the phone immediately if you have any reason to suspect
that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of
your device to determine if it is adequately shielded from RF energy. Your
physician may be able to assist you in obtaining this information.
Use While Driving
Check the laws and regulations on the use of phones in the area where
you drive. Always obey them.
When using your phone while driving, please:
8
•
Give full attention to driving and to the road.
•
Use hands-free operation, if available.
•
Pull off the road and park before making or answering a call if driving
conditions so require.
Responsible driving best practices may be found in the “Wireless Phone
Safety Tips” at the end of this manual and at the Motorola website:
www.Motorola.com/callsmart.
Operational Warnings
For Vehicles With an Air Bag
Do not place a phone in the area over an air bag or in the air bag
deployment area. Air bags inflate with great force. If a phone is placed in
the air bag deployment area and the air bag inflates, the phone may be
propelled with great force and cause serious injury to occupants of the
vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially explosive
atmosphere. Do not remove, install, or charge batteries in such areas.
Sparks in a potentially explosive atmosphere can cause an explosion or
fire resulting in bodily injury or even death.
Note:
The areas with potentially explosive atmospheres referred to above
include fueling areas such as below decks on boats, fuel or chemical
transfer or storage facilities, areas where the air contains chemicals or
particles, such as grain, dust, or metal powders. Areas with potentially
explosive atmospheres are often but not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn OFF your
phone when you are near electrical blasting caps, in a blasting area, or in
areas posted “Turn off electronic devices.” Obey all signs and instructions.
9
Batteries
Batteries can cause property damage and/or bodily injury such as burns if
a conductive material such as jewelry, keys, or beaded chains touch
exposed terminals. The conductive material may complete an electrical
circuit (short circuit) and become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside a pocket, purse, or
other container with metal objects.
and chargers.
Your battery or phone may contain symbols, defined as follows:
SymbolDefinition
032374o
Important safety information will follow.
Use only Motorola original batteries
032376o
032375o
032377o
Li Ion BATT
032378o
Your battery or phone should not be disposed of in a
fire.
Your battery or phone may require recycling in
accordance with local laws. Contact your local
regulatory authorities for more information.
Your battery or phone should not be thrown in the
trash.
Your phone contains an internal lithium ion battery.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts when
exposed to flashing lights, such as when watching television or playing
video games. These seizures or blackouts may occur even if a person
never had a previous seizure or blackout.
If you have experienced seizures or blackouts, or if you have a family
history of such occurrences, please consult with your doctor before
playing video games on your phone or enabling a flashing-lights feature
on your phone. (The flashing-light feature is not available on all products.)
10
Parents should monitor their children's use of video game or other
features that incorporate flashing lights on the phones. All persons should
discontinue use and consult a doctor if any of the following symptoms
occur: convulsion, eye or muscle twitching, loss of awareness, involuntary
movements, or disorientation.
To limit the likelihood of such symptoms, please take the following safety
precautions:
•
Do not play or use a flashing-lights feature if you are tired or need
sleep.
•
Take a minimum of a 15-minute break hourly.
•
Play in a room in which all lights are on.
•
Play at the farthest distance possible from the screen.
Repetitive Motion Injuries
When you play games on your phone, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of your
body. Follow these instructions to avoid problems such as tendonitis,
carpal tunnel syndrome, or other musculoskeletal disorders:
•
Take a minimum 15-minute break every hour of game playing.
•
If your hands, wrists, or arms become tired or sore while playing,
stop and rest for several hours before playing again.
•
If you continue to have sore hands, wrists, or arms during or after
play, stop playing and see a doctor.
11
Getting Started
About This Guide
This guide describes the basic features of your
Motorola wireless phone.
Note: A More Here reference guide is also available
that describes your phone’s features in more detail.
To obtain the More Here guide for your phone, or another
copy of this guide, see the Motorola Web site at:
http://motorola.com/consumer/manuals
Getting Started
http://motorola.ca/consumer
or contact the Motorola Customer Call Center at 1-800331-6456 (U.S.A.) or 1-800-461-4575 (Canada).
Optional Features
This label identifies an optional network, SIM
032380o
card, or subscription-dependent feature that may
not be offered by all service providers in all
geographical areas. Contact your service provider
for more information.
(Canada)
(U.S.A.)
Optional Accessories
This label identifies a feature that requires an
optional Motorola Original™ accessory.
12
Installing the SIM Card
Your SIM (Subscriber Identity Module) card contains
your phone number, service details, and phonebook/
message memory.
Caution:
exposing your SIM card to static electricity, water, or dirt.
12
Do not bend or scratch your SIM card. Avoid
032342o
Getting Started
032343o
34
032342o
Battery Use
Battery performance depends on many factors, including
your wireless carrier’s network configuration; signal
strength; the temperature at which you operate your
phone; the features and/or settings you select and use;
13
items attached to your phone’s accessory connector; and
your voice, data, and other application usage patterns.
Caution:
metal objects to contact or short-circuit the battery
terminals.
To maximize your battery’s performance:
•
Always use Motorola Original batteries and battery
chargers. The phone warranty does not cover damage
caused from using non-Motorola batteries and/or
battery chargers.
•
New batteries or batteries that have been stored for a
Getting Started
long time may require a longer charge time.
•
Maintain the battery at or near room temperature
when charging.
•
Do not expose batteries to temperatures below -10°C
(14°F) or above 45°C (113°F). Always take your
phone with you when you leave your vehicle.
•
When you do not intend to use a battery for a while,
store it uncharged in a cool, dark, dry place, such as a
refrigerator.
•
Batteries gradually wear down and require longer
charging times. This is normal. If you charge your
battery regularly and notice a decrease in talk time or
an increase in charging time, then it is probably time
to purchase a new battery.
To prevent injuries or burns, do not allow
The rechargeable batteries that power this phone
must be disposed of properly and may need to be
recycled. Refer to your battery’s label for battery
14
type. Contact your local recycling center for proper
disposal methods.
Warning:
they may explode.
Never dispose of batteries in a fire because
Installing the Battery
Note:
If necessary, remove the battery from its protective
clear plastic case.
Your phone is designed to use only Motorola
Original batteries and accessories. We recommend
that you store batteries in their protective cases
when not in use.
032341o
12
Getting Started
3
032340a
15
Installing a
032371a
Lanyard
You can attach a lanyard to
your phone to help you carry it.
To install a lanyard, remove the
back cover. Pull one end of the
lanyard through a lanyard notch,
then through the loop in the other
end of the lanyard (as shown).
Charging the Battery
Getting Started
New batteries are shipped partially charged. Before you
can use your phone, you need to install and charge the
battery as described below. Some batteries perform best
after several full charge/discharge cycles.
Action
1
Plug the travel
charger into the
bottom of your
phone.
032345o
032371a
16
2
Plug the other end of the travel charger into the
appropriate electrical outlet.
3
When your phone indicates
the travel charger.
Charge Complete
, remove
Tip:
You can safely leave the travel charger connected to
your phone after charging is complete. This will not
damage the battery.
Turning Your Phone On
Action
1
Press and hold O
for 2 seconds to
turn on the phone.
2
If necessary, enter your SIM card PIN code and
press
OK
(+) to unlock the SIM card.
Caution:
in a row, your SIM card is disabled and your phone
displays SIM Blocked.
3
If you enter an incorrect PIN code 3 times
If necessary, enter your 4-digit unlock code and
press
OK
(+) to unlock the phone.
032346o
Power
Key
Adjusting Volume
Getting Started
Press left or right on the 5Way Navigation key (
increase or decrease volume.
•
increase or decrease
earpiece volume during
a call
•
increase or decrease the ringer volume setting when
the home screen is visible
S
) to
5-way
Navigation
Key
032352o
17
Tip:
At the lowest volume setting, press the key left
once to switch to vibrate alert. Press it again to
switch to silent alert. Press the key right to
cycle back to vibrate alert, then ring alert.
•
turn off an incoming call alert
Making a Call
PressTo
1
keypad keys dial the phone number
2
3
Getting Started
N
O
make the call
end the call and “hang up” the
phone when you are finished
Answering a Call
When you receive a call, your phone rings and/or vibrates
and displays an incoming call message.
PressTo
1
N
2
or
ANSWER
O
(-)
answer the call
end the call and “hang up” the
phone when you are finished
Viewing Your Phone Number
To view your phone number from the home screen, press
M#
While you are on a call, press
18
.
M
>
My Tel. Numbers
.
Note:
Your phone number must be stored on your SIM
card to use this feature. To store your phone number on
the SIM card, see page 52. If you do not know your
phone number, contact your service provider.
Getting Started
19
Highlight Features
You can do much more with your phone than make and
receive calls! This section describes some of your
phone’s highlight features.
Taking and Sending a Photo
To activate your phone’s camera:
Find the Feature
The active viewfinder image appears on your display.
Highlight Features
Press S : to
change zoom,
or bc to
change
brightness.
M
>
032348o
032348a
IMAGE
AREA
Multimedia >Camera
BACKCAPTURE
Return to previous
screen.
Point the camera lens at the photo subject, then:
20
Press
menu.
M
to open sub-
Take a photo.
PressTo
1
CAPTURE
(+)take a photo
2
STORE
(+)view storage options
If you choose to store the photo,
continue to step 3.
or
DISCARD
(-)delete the photo and return to the
active viewfinder
3
S
4
SELECT
(+)perform the storage option of your
* Optional network/subscription dependent feature. Not all
features may be available on your phone.
Press
M
in the viewfinder to open the
Pictures Menu
OptionDescription
Go To Pictures
Auto-Timed Capture
Delete All
Pictures Setup
View Free Space
can include the following options:
scroll to
Apply as Wallpaper
Apply as Screen Saver
choice
View pictures and photos stored
on your phone.
Set a timer for the camera to take
a photo.
Delete all pictures.
Open the setup menu to adjust
picture settings.
See how much memory remains
for storing pictures.
Send in Message, Store Only
, or
, or
Send to Blog
Pictures Menu
,
*
. The
Highlight Features
21
Tip:
To assign a stored picture to a phonebook entry, open
the entry and press
pictures to entries stored on your SIM card.
M
>
Edit>Picture
. You cannot assign
Sending a Multimedia
Message
A
Multimedia Messaging Service
032380o
message contains one or more slides with text
and embedded media objects (including photos,
pictures, animations, sounds, voice records, and/
or video clips). You can send the multimedia message to
other wireless phone users, and to email addresses.
(MMS)
22
Highlight Features
Find the Feature
PressTo
1
keypad keysenter slide text
2OK(+)store the message
M
>
Messages
>
Create Message
>
New Multimedia Msg
Tip:
You can press M to
open the
Picture, Voice Record, Sound
Soundtrack, Video, New Page
Quick Note
MMS Menu
, or
Contact Info
and insert a
,
,
.
PressTo
3
S
4
SELECT
(+)select
or
ADD
(+)add a phonebook entry to the
5
S
scroll to a
•
•
•
[New Phonebook Entry]
number/address. Press
OK
(+) or
are finished.
list of recipients. Press
DONE
finished.
scroll to
Send To
Highlight
enter one or more phone
numbers and/or email
addresses.
Highlight
[New Phonebook Entry]
a number/address and
add it to the phonebook.
Or highlight an existing
phonebook entry.
[One Time Entry]
DONE
(-) when you are
Subject
option:
[One Time Entry]
and enter a
(-) when you
to
to enter
or
032380o
Highlight Features
6
CHANGE
(-)select
7
keypad keysenter the subject
8OK(+)store the subject
9
CHANGE
(-)select
Subject
Attachments
23
PressTo
10
S
11
SELECT
(+)select the file type
12
S
13
SELECT
(+)attach the file
14
BACK
(-)return to the message editor
15
S
16
CHANGE
(-)select
17
ADD
(+) or
REMOVE
(+)
18
DONE
(-)return to the message editor
19
SEND
Highlight Features
Receiving a Multimedia
(+)
or
M
scroll to
highlight the file you want
scroll to
Receipt
activate/deactivate the
delivery report
send the message
send the message, view
message details, save the
message in the drafts folder,
or cancel the message
Message
When you receive a multimedia message, your
032380o
phone displays the
and a
New Message
r
(message waiting) indicator
notification, and sounds an alert.
Picture, Sounds
Receipt
, or
Video
PressTo
READ
(+)open the message
Multimedia messages that you receive can contain
different media objects:
24
•
Photos, pictures, and animations are displayed as you
read the message.
•
A sound file or video clip begins playing when its
slide is displayed.
•
Attached files are added to the end of the
message. To open the attachment, highlight the
file indicator/filename and press
type),
PLAY
(+) (sound file or video clip), or
(object such as phonebook or datebook entry, or
unknown file type).
VIEW
(+) (image file
OPEN
(+)
Playing Video Clips
You can download video clips with the micro-browser, and
send and receive video clips in multimedia messages.
To play a video clip stored on your phone:
Highlight Features
Find the Feature
M
>
PressTo
1
S
2
PLAY
(+)start video clip playback
scroll to the video clip
Multimedia >Videos
25
The video clip displays in the video clip playback screen.
Press
S
:
to pause or
play the
video.
Press
Highlight Features
032349a
VIDEO
AREA
BACKPAUSE
Return to
previous
screen.
M
Pause video
clip.
to open sub-menu.
Timer
indicates %
played.
Using Event Lights
When event lights are activated, your phone displays a
light pattern to notify you of the following events: incoming
calls, incoming calls from specific phonebook categories,
incoming text and voicemail messages, alarms, power up,
power down, or battery charging.
To turn event lights on or off:
26
Find the Feature
PressTo
1
S
2
SELECT
(+)select the option
M
scroll to On or
>
Settings >Ring Styles
>
Event Lights
Off
Using Ring Lights
Select a light pattern to display when you receive an
incoming call (in addition to or instead of a ring/vibrate
alert). To select a light pattern:
Find the Feature
PressTo
1
S
2
SELECT
(+)select the light pattern
Note:
Ring lights only appear if
The same light pattern displays for all incoming calls. You
can use the light ID feature to display a distinctive light
pattern when you receive calls from phonebook entries in
a specific category. To set a light ID for a phonebook
category, see page 75. The light ID is not displayed when
ring lights are turned off.
M
>
Settings >Ring Styles
>
Ring Lights
scroll to the light pattern
Event Lights
are On.
Highlight Features
27
Learning to Use Your
Phone
See page 1 for a basic phone diagram.
Using the Display
The
home screen
or using the menu. You must be in the home screen to
dial a phone number.
Date
Learning to Use Your Phone
The
menu key (
Labels at the bottom corners of the display show the
current soft key functions. Press the left soft key (
right soft key (
left or right soft key label.
H
(menu) indicator indicates that you can press the
M
+
displays when you are
0323550a
Service Provider
10/15/04
MESSAGECAMERA
Right Soft Key LabelLeft Soft Key Label
Menu Indicator
) to enter the main menu.
) to perform the function indicated by the
not
Clock
on a call
-
) or
28
Your phone can display an analog or digital clock in the
home screen (see page 77).
The following status indicators can display:
5.
Roam
4.
1.
Signal
Strength
2.
GPRS
3.
Data
Transmission
1. Signal Strength Indicator
Vertical bars show the strength of the network connection.
You cannot make or receive calls when the
indicator or
2. GPRS Indicator
032380o
Active
Line
Service Provider
10/15/04
STYLESCAMERA
0>
(no transmit) indicator displays.
Shows that your phone is using a high-speed
General Packet Radio Service (GPRS) network
connection. GPRS allows faster data transfer
speeds. Indicators can include:
6.
0323551o
032351o
Messaging
Presence
7.
Message
Battery
10.
Level
9.
Ring Alert
8.
Location
0
(no signal)
Learning to Use Your Phone
Å
= GPRS PDP context
active
Ç
= GPRS packet data
available
29
3. Data Transmission Indicator
Shows connection and data transmission status. Indicators
can include:
4
= secure packet data
transfer
3
= secure application
connection
2
= secure Circuit Switch
Data (CSD) call
4. Roam Indicator
Shows when your phone is seeking or using
032380o
another network outside your home network.
Indicators can include:
8
= 2.5G home
:
= 2G home
7
= insecure packet data
transfer
6
= insecure application
connection
5
= insecure CSD call
9
= 2.5G roam
;
= 2G roam
5. Active Line Indicator
Learning to Use Your Phone
30
Shows @ or B to indicate the current active phone
032380o
line. Other indicators can include:
A
= line 1 active, call
forward on
E
= alarm activated
C
= line 2 active, call
forward on
6. Messaging Presence Indicator
Shows when Instant Messaging (IM) is active.
032380o
Indicators can include:
P
= IM active
_
= busy
J
= available for phone
calls
I
= available for IM
Q
= invisible to IM
X
= offline
When a Java application is active, a
indicator can display in this location.
7. Message Indicator
Displays when you receive a new message.
032380o
Indicators can include:
r
= text message
d
= IM message
s
= voicemail and text
message
When you enter a message, a number in this location
shows the number of characters left on the current page
t
a
`
(Java midlet)
= voicemail message
= active chat session
Learning to Use Your Phone
31
(text message), or the message size (multimedia
message).
8. Location Indicator
Your phone may be able to send location
032380o
information to the network during an emergency
call. Indicators show when your phone is sending
location information:
Ö
= location on
9. Ring Style Indicator
Shows the ring style setting.
y
= loud ring
|
= vibrate
{
= silent
10. Battery Level Indicator
Vertical bars show the battery charge level. Recharge the
Learning to Use Your Phone
battery when
sounds.
Low Battery
displays and the battery alert
Ñ
= location off
z
= soft ring
}
= vibrate and ring
32
Using the 5-Way Navigation
Key
5-way
Navigation
center select button to select a highlighted menu item.
032352o
Key
Use the 5-way navigation key
(
S
) to scroll up, down, left, or
right through the menu
system, highlight menu items,
change feature settings, and
play games. Press the
Using Menus
From the home screen, press M to enter the main menu.
Menu Key
Enter menu
system
Left Soft Key
Perform left
function.
5-Way
Navigation Key
Scroll up, down,
left, or right.
Press center to
select.
Games & Apps
EXITSELECT
Highlighted
Menu Feature
Icon
Right Soft Key
Perform right
function.
End Key
Exit menu
without making
changes.
Learning to Use Your Phone
33
Press S to scroll to and highlight a menu feature icon in
the main menu. The following icons represent features that
may appear in the main menu, depending on your service
provider and service subscription options.
IconFeature IconFeature
Q
É
ã
n
e
Games & Apps
Office Tools
IM
Phonebook
Messages
h
w
á
s
Multimedia
Settings
Web Access
Recent Calls
Selecting a Menu Feature
To select a menu feature, starting from the home screen:
Find the Feature
This example shows that from the home screen, you must
press
M
, scroll to and select
menu, then scroll to and select
and the left/right soft keys to select the functions listed in
the bottom left and right corners of the display.
Learning to Use Your Phone
34
M
s
Dialed Calls
>
Recent Calls >Dialed Calls
Recent Calls
from the main
. Press S to scroll,
Selecting a Feature Option
Some features require you to select an option from a list:
032354o
Dialed Calls
10) John Smith
9) Lisa Owens
Press
BACK (-)
go back to
previous
screen.
Press
S
to scroll up or down to highlight the option you
want.
•
In a numbered list, press a number key to highlight the
option.
•
In an alphabetized list, press a key repeatedly to cycle
through the letters on the key and highlight the closest
matching list option.
When an option displays a list of possible values, press
left or right to scroll through and select a value.
When an option displays a list of possible numeric values,
press a number key to set the value.
8) Adda Thomas
7) Jack Bradshaw
to
BACKVIEW
Press
M
sub-menu.
to open
Highlighted
Option
Press
VIEW (+)
view details of
highlighted
option.
to
S
Learning to Use Your Phone
35
Entering Text
Some features require you to enter information.
$
450
Highlighted
Option
Press
CHANGE (+)
to view
details of
highlighted
option.
Character
Counter
Press
open submenu.
Press S to
scroll down to
other options.
Press
CANCEL (-)
to go back to
previous
screen.
The message center lets you compose and send text
messages. A Character Counter indicates how many more
characters will fit in a
For indicator
descriptions,
see following
section.
Flashing
cursor
Learning to Use Your Phone
indicates
insertion point.
032355o
Entry Details
Name: John Smith
Category: General
No.: 2125551212
Type: Work
CANCELCHANGE
Short Msg
Ab
.
ó
Msg
032356b
CANCELINSERT
M
to
36
CANCEL (-)
Press
to exit without
making changes.
Press
INSERT (+)
insert a quick note,
picture, or sound.
to
Choosing a Text Entry Method
Multiple text entry methods make it easy for you to enter
names, numbers, and messages. The method you select
remains active until you select another method.
Press
#
in any text entry screen to select one of the
following entry methods:
Primary
Numeric
Symbol
Secondary
Alternatively, you can select a text entry method in any text
entry screen by pressing
Setting Up a Text Entry Method
Press M>
Primary Setup
iTAP
Tap
or
The primary text entry method
(see below to set).
Enter numbers only (see page
44).
Enter symbols only (see page 44).
The secondary text entry method
(see below to set).
M
>
Entry Mode
Entry Setup
Secondary Setup
from any text entry screen. Select
, and choose:
Let the phone predict each word
as you press keys (see page 42).
Enter letters and numbers by
pressing a key one or more times.
.
Learning to Use Your Phone
37
Tap Extended
None
Using Capitalization
Press 0 in any text entry screen to change text case. The
following indicators show capitalization status:
U
= no capital letters
T
= all capital letters
Text Entry Method Indicators
When you select the
the following indicators identify the text entry setting:
PrimarySecond.
gm
hq
Learning to Use Your Phone
38
fl
jp
kn
io
The following indicators identify
method:
W
= numeric method [= symbol method
Enter letters, numbers, and
symbols by pressing a key one or
more times.
Hide the Secondary setting (only
available for Secondary Setup).
V
= capitalize next letter
only
Primary
or
Secondary
text entry method,
Tap, no capital letters
Tap, capitalize next letter
only
Tap, all capital letters
iTAP, no capital letters
iTAP, capitalize next
letter only
iTAP, all capital letters
Numeric
or
Symbol
entry
Using Tap Method
This is the standard method for entering text on your
phone.
Tap method cycles through the letters and number of the
key you press. Tap Extended method also cycles through
additional symbols as shown in the chart on page 41.
PressTo
1
A keypad key
one or more
times
2
keypad keysenter remaining characters.
3OK(+)store the text
In a text entry screen, you can press
methods. If
Secondary
Tap
or
entry method, see page 37.
select a letter, number, or
symbol
Tip:
Press S right to accept
a word completion, or
insert a space.
Tap Extended
is not available as the
*
#
to switch entry
to
Primary
or
Learning to Use Your Phone
39
When you enter text with
key functions change.
Character
displays at
insertion point.
Press
delete character to left
of insertion point.
When you enter 3 or more characters in a row, your phone
may guess the rest of the word. For example, if you enter
prog
you might see:
Tap
or
Tap Extended
Ab
ó
Msg
T |
032357o
DELETEOK
DELETE (-)
to
method, the soft
After 2
seconds,
character is
435
accepted and
cursor moves
to next
position.
Press
OK (+)
accept and store text.
to
Character
displays at
insertion point.
Learning to Use Your Phone
If you want a different word (such as
pressing keypad keys to enter the remaining characters.
40
Ab ó
Msg
435
This is a prog | ram
032358o
DELETEOK
progress
Press
S c
*
prog.
to
, or
to
accept
program
press
reject it and
enter a space
after
), continue
Character Chart
Use this chart as a guide for entering characters with
Tap Extended
method.
1
2
3
4
5
6
7
8
9
0
*
#
Note:
available on your phone. In an email address or URL
editor,
a b c 2 á à â ã ç æ
d e f 3 é è ê ë
g h i 4 í î ï
j k l 5
m n o 6 ñ ó ò ô õ œ
p q r s 7
t u v 8 ú ù û ü
w x y z 9
change text case, for capital letters
enter a space (hold to enter a return)
change text entry method (hold for default)
This chart may not reflect the exact character set
1
first shows common characters for that editor.
Press a keypad key repeatedly to cycle through its
characters.
Press S left or right to move the flashing cursor to the
left or right in a text message.
The first character of every sentence is capitalized. If
necessary, press
S
down to force the character to
Learning to Use Your Phone
41
lowercase before the cursor moves to the next
position.
•
If you enter or edit information and do not want to save
the changes, press
O
to exit without saving.
Using iTAP™ Method
iTAP™ software provides a predictive text entry method
that lets you enter a word using one keypress per letter.
This can be faster than
phone combines the keypresses into common words.
For example, if you press
combinations that match your keypresses display:
Press
DELETE (-)
Learning to Use Your Phone
to
delete last
letter.
Tap
method, because your
7764
Ab
ó
Msg
Prog | ram
032359o
Prog Proh Spoi
DELETESELECT
Press
to lock highlighted
435
c
SELECT (+)
combination.
, letter
Press
accept
Program
Press
highlight
another
combination.
Press
enter
a space.
Sd
.
S c
*
Prog
to
to
to
and
If you want a different word (such as
pressing keypad keys to enter the remaining characters.
42
Progress
), continue
Entering Words
In a text entry screen, you can press # to switch entry
methods. An indicator shows which method is active (see
page 38). If
Secondary
PressTo
1
2S left or right highlight the combination you
3
If you enter a word your phone does not recognize, the
phone stores it to use as one of your word options. When
you fill memory space for unrecognized words, your phone
deletes the oldest words to add new words.
iTAP
method is not available as the
entry method, see page 37.
keypad keys
(one press per
letter)
SELECT
(+)
or
*
show possible letter
combinations at the bottom of
the display
want
lock a highlighted
combination
You can press keypad keys to
add more letters to the end of
the combination.
enter the highlighted
combination when it spells a
word
A space is automatically
inserted after the word.
Primary
or
Learning to Use Your Phone
43
Using Numeric Method
In a text entry screen, press # to switch entry methods
until the
Press keypad keys to enter the numbers you want. When
you finish entering numbers, press
entry method.
W
(numeric) indicator displays.
#
to switch to another
Using Symbol Method
In a text entry screen, press # to switch entry
methods until the
PressTo
1
keypad keys
(one press per
symbol)
2S left or right highlight the combination you
3
SELECT
Learning to Use Your Phone
or
*
(+)
[
(symbol) indicator displays.
show possible symbol
combinations at the bottom of
the display
want
lock a highlighted
combination
You can press keypad keys to
add more symbols to the end
of the combination.
enter the highlighted
combination
Symbol Chart
Use this chart as a guide for entering characters with
symbol method.
44
1
2
3
4
5
6
7
8
9
0
*
#
Note:
available on your phone. In an email address or URL
editor,
@ _ \ ß
/ : ;
" & '
( ) [ ] { }
¿ ¡ ~
< > =
$ £ ¥ ¤
# % *
+ - x * / = > < # §
enter a space (hold to enter a return)
change text entry method (hold for default)
This chart may not reflect the exact character set
1
first shows common characters for that editor.
Deleting Letters and Words
Place the cursor to the right of the text you want to delete,
and then:
Action
Press
DELETE
(-) to delete one letter at a time.
Hold
DELETE
(-) to delete the entire message.
Learning to Use Your Phone
45
Changing a Code, PIN, or
Password
Your phone’s 4-digit unlock code is originally set to 1234,
and the 6-digit security code is originally set to 000000.
Your service provider may reset these codes before you
receive your phone.
If your service provider has not reset these codes, we
recommend that you change them to prevent others
from accessing your personal information. The unlock
code must contain 4 digits, and the security code must
contain 6 digits.
You can also reset your SIM card PIN code, PIN2 code,
and/or call barring password if necessary.
To change a code or password:
Find the Feature
M
>
Settings >Security
>
New Passwords
Locking and Unlocking Your
Phone
Learning to Use Your Phone
You can lock your phone manually or set the phone to lock
automatically whenever you turn it off.
To use a locked phone, you must enter the unlock code. A
locked phone still rings or vibrates for incoming calls or
messages, but you must unlock it to answer.
You can make emergency calls on your phone even when
it is locked (see page 59).
46
Locking Your Phone Manually
Find the Feature
PressTo
1
keypad keysenter your unlock code
2OK(+)lock the phone
M
>
Settings >Security
>
Phone Lock >Lock Now
Unlocking Your Phone
Your phone’s unlock code is originally set to 1234. Your
service provider may reset the unlock code to the last 4
digits of your phone number.
At the
Enter Unlock Code
PressTo
1
keypad keysenter your unlock code
2OK(+)unlock your phone
prompt:
Setting Your Phone to Lock Automatically
You can set your phone to lock every time you turn it off:
Find the Feature
M
>
Settings >Security
>
Phone Lock
>
Automatic Lock >On
Learning to Use Your Phone
PressTo
1
keypad keysenter your unlock code
2OK(+)activate automatic lock
47
If You Forget a Code, PIN, or
Password
Your phone’s 4-digit unlock code is originally set to 1234,
and the 6-digit security code is originally set to 000000.
Your service provider may reset the unlock code to the last
4 digits of your phone number before you receive your
phone.
If you forget your unlock code, try entering 1234 or the
last 4 digits of your phone number. If that does not
work, at the
PressTo
1
2
3OK(+)submit your security code
If you forget your security code, SIM card PIN code, PIN2
code, or call barring password, contact your service
provider.
Enter Unlock Code
M
keypad keysenter your security code
prompt:
display the unlock code
bypass screen
Locking and Unlocking the
Learning to Use Your Phone
Keypad
You can lock the keypad to prevent accidental key presses
(for example, when carrying your phone in a purse or
pocket).
PressTo
M*
48
lock or unlock the keypad
Note:
Incoming calls and messages unlock the keypad.
Using the Phonebook
This section briefly describes basic phonebook operations.
For more information about using the phonebook, see
page 73.
Shortcut:
you can press
Storing a Phone Number
Enter a phone number in the home screen, then press
STORE
Fill in the other fields to complete the entry.
Select
number) under the same
Recording a Voice Name
To open your phonebook from the home screen,
S
up or down.
(+) to create a phonebook entry with that number.
MORE
to store another number (for example, a work
Name
.
Learning to Use Your Phone
When creating a phonebook entry, scroll to
press
RECORD
(+). When you are ready, press
again and say the entry’s name (within 2 seconds). When
prompted, press
DONE
(-) to store the voice name.
Note:
This option is not available for entries stored on the
SIM card.
RECORD
(+) and repeat the name. Press
Voice Name
RECORD
and
(+)
Storing a Picture for Caller ID
You can store a picture for a phonebook entry. The picture
appears when you receive calls from the entry.
49
Note:
This option is not available for entries stored on the
SIM card.
When creating a phonebook entry, scroll to
press
CHANGE
(+). Press S to select a picture, and press
SELECT
(+) to store it for the entry.
Picture
Dialing a Number
and
Press M >
Tip:
To quickly highlight entries in your
your entries are sorted by
speed number to highlight it. For example, press
15
Name, Voice Name
name to highlight it. For example, press
first entry that starts with “K”.
for entry number 15. If your entries are sorted by
Phonebook
, or
> entry to callN.
Speed No.
, press an entry’s
Email
, enter the first letter of the entry’s
55
Voice Dialing a Number
Press M>
say the entry’s name (within 2 seconds).
Tip:
To create a shortcut to
M
>
the
Learning to Use Your Phone
M
use a shortcut, press
Office Tools
Office Tools>Dialing Services
. Your phone prompts you to save the shortcut. To
, press
Dialing Services>Voice Dial
Voice Dial
, press
, scroll to
M
and the shortcut key number.
Voice Dial
Sorting Phonebook Entries
Press M>
select whether you want to sort the phonebook list by
Speed No., Voice Name
Phonebook
, or
, press M>
Email
.
Setup>Sort by
Phonebook
, and hold
, then
list: If
for the
, and
Name
,
50
When sorting by name, you can view
the
Primary
number for each name. To set the primary
number for a name, see page 76.
Viewing Entries By Category
All
numbers or just
Press M>
whether you want to view
category (
category you created.
To set the category for a phonebook entry, see page
75.
Phonebook
Business, Personal, General, VIPs
, press M>
All
entries, entries in a predefined
Categories
, then select
), or entries in a
Learning to Use Your Phone
51
Setting Up Your Phone
Storing Your Name and Phone
Number
To store or edit your name and phone number
032380o
information on your SIM card:
Find the Feature
Shortcut:
Press
M#
your name and phone number.
If you do not know your phone number, contact your
service provider.
M
>
Settings >Phone Status
>
My Tel. Numbers
from the home screen to edit
Setting the Time and Date
Your phone uses the time and date for the
phone can synchronize its time and date with the network:
Find the Feature
To set the time and date manually, set
Setting Up Your Phone
then set the
52
Time
and
Date
options:
M
>
>
>
Datebook
Settings >Initial Setup
Time and Date >Autoupdate
On
Autoupdate
to
. Your
Off
and
Find the Feature
M
>
Settings >Initial Setup
>
Time and Date
>
TimeorDate
Setting a Ring Style
Your phone rings or vibrates to notify you of an incoming
call or other event. This ring or vibration is called an
You can select one of five different ring styles. The ring
style indicator in the display shows the current ring style
(see page 32).
To set a ring style:
alert
.
Find the Feature
PressTo
1
S
2
SELECT
(+)select the ring style
Each ring style contains settings for specific event alerts,
ringer ID, and ringer and keypad volume. To change these
settings, press
Shortcut:
screen, you can press
M
To change your ring volume from the home
M
>
Settings >Ring Styles
>
Style
scroll to the ring style
>
Settings>Ring Styles
S
left or right.
>style
Detail
.
Setting a Wallpaper Image
You can set a photo, picture, or animation as a wallpaper
(background) image in your phone’s home screen. The
Setting Up Your Phone
53
wallpaper image appears as a faint watermark in text and
menu displays.
Find the Feature
PressTo
1
S
2
CHANGE
3S up or down scroll to a picture/animation
4
SELECT
5
S
6
CHANGE
7
S
8
SELECT
9
Setting Up Your Phone
BACK
M
>
Settings >Personalize
>
Wallpaper
scroll to
(+)open the picture viewer
Scroll to
wallpaper image.
(+)select the image
scroll to
(+)adjust the image layout
scroll to
screen
Center
center of the display.
Tile
multiple copies of the image.
Fit-to-screen
if necessary, to fit the display.
(+)confirm the layout setting
(-)save wallpaper settings
Picture
(None)
to turn off the
Layout
Center, Tile
places the image in the
fills the display with
resizes the image,
, or
Fit-to-
Setting a Screen Saver Image
Set a photo, picture, or animation as a screen saver image.
54
The screen saver image displays when the phone is on
and no activity is detected for a specified time. The image
shrinks to fill the display, if necessary. An animation
repeats for one minute, then the first frame of the
animation displays.
Turn off the screen saver to extend battery life.
Find the Feature
PressTo
1
S
2
CHANGE
(+)open the picture viewer
3S up or down scroll to a picture/animation
4
SELECT
(+)select the image
5
S
6
CHANGE
(+)set the delay interval
7
S
8
SELECT
(+)confirm the delay setting
9
BACK
(-)save screen saver settings
M
>
Settings >Personalize
>
Screen Saver
scroll to
Scroll to
screen saver image.
scroll to
scroll to the inactivity interval
that triggers the screen saver
Picture
(None)
to turn off the
Delay
Setting Display Color
Select the color palette that your phone uses to display
indicators, highlights, and soft key labels.
Setting Up Your Phone
55
Find the Feature
M
>
Settings >Personalize
>
Color Style
Adjusting the Backlight
Set the amount of time that the display and keypad
backlights remain on.
Find the Feature
M
>
Settings >Initial Setup
>
Backlight
Setting Display Timeout
Set the display to turn itself off when no activity is detected
for a specified time.
Find the Feature
M
>
Settings >Initial Setup
>
Display Timeout
Setting Up Your Phone
56
Calling Features
For basic instructions on how to make and answer calls,
see page 18.
Changing the Active Line
Change the active phone line to make and
032380o
receive calls from your other phone number.
Note:
This feature is available only for dual-line-
enabled SIM cards.
Calling Features
Find the Feature
The active line indicator in the display shows the currently
active phone line (see page 30).
Redialing a Number
PressTo
1
N
2
S
3
N
M
>
Settings >Phone Status
>
Active Line
view the dialed calls list
scroll to the entry you want to
call
redial the number
Using Automatic Redial
When you receive a busy signal, your phone
032380o
displays
Call Failed, Number Busy
.
57
To redial the phone number:
PressTo
N
or
RETRY
(+)activate automatic redial
Your phone automatically redials the number. When the
call goes through, your phone rings or vibrates one time,
displays
Redial Successful
, and then connects the call.
Using Caller ID
Incoming Calls
The phone displays the caller’s name (and picture, if
available) when the name is stored in your phonebook, or
Incoming Call
Calling Features
You can also set your phone to play a distinctive ringer ID
Calling line identification (Caller ID) displays the
032380o
phone number for incoming calls in your phone’s
display.
when caller ID information is not available.
and/or light ID for specific entries stored in your
phonebook. For more information, see page 74.
Outgoing Calls
You can show or hide your phone number as an
032380o
ID for the calls that you make.
58
Find the Feature
M
>
Settings >In-Call Setup
>
My Caller ID
You can override the default caller ID setting when you
make a call. While dialing (with digits visible in the display):
PressTo
M
>
Hide ID/Show ID
hide or show your caller ID for
the next call
Canceling an Incoming Call
While the phone is ringing or vibrating:
PressTo
IGNORE
(+)cancel the incoming call
Depending on your phone settings and/or service
032380o
subscription, the call may be forwarded to another
number, or the caller may hear a busy signal.
Calling an Emergency Number
Your service provider programs one or more emergency
phone numbers, such as 911, that you can call under
any circumstances, even when your phone is locked or
the SIM card is not inserted.
Emergency numbers vary by country. Your phone’s
preprogrammed emergency number(s) may not work in all
locations, and sometimes an emergency call cannot be
placed due to network, environmental, or interference
issues.
Calling Features
59
PressTo
1
keypad keysdial the emergency number
2
N
call the emergency number
Dialing International Numbers
Press and hold 0 to insert the local international access
code (
+
) for the country from which you are calling.
Viewing Recent Calls
Your phone keeps lists of the calls you recently received
and dialed, even if the calls did not connect. The lists are
sorted from newest to oldest entries. The oldest entries
are deleted as new entries are added.
Shortcut:
dialed calls list.
Calling Features
Press N from the home screen to view the
Find the Feature
PressTo
1
S
2
SELECT
(+)select the list
3
S
M
>
Recent Calls
scroll to
Dialed Calls
scroll to an entry
\
Received Calls
means the call connected.
or
60
PressTo
4
N
or
VIEW
(+)
or
M
The
Last Calls Menu
OptionDescription
Store
can include the following options:
call the entry’s number
Press and hold
2 seconds to send the
number as DTMF tones
during a call.
view entry details
open the
perform various operations
on the entry
Create a phonebook entry with
the number in the
N
Last Calls Menu
No.
field.
for
to
Calling Features
Delete
Delete All
Hide ID/Show ID
Send Message
Add Digits
Attach Number
Delete the entry.
Delete all entries in the list.
Hide or show your caller ID for the
next call.
Open a new text message with the
number in the
Add digits after the number.
Attach a number from the
phonebook or recent calls lists.
To
field.
61
OptionDescription
Send Tones
Talk then Fax
Send the number to the network
as DTMF tones.
This option displays only during a
call.
Talk and then send a fax in the
same call (see page 83).
Returning an Unanswered Call
Your phone keeps a record of your unanswered calls, and
displays:
•
X Missed Calls
PressTo
1
Calling Features
2
3
, where X is the number of missed calls
VIEW
(+)see the received calls list
S
N
select a call to return
make the call
Using the Notepad
The most recent set of digits entered on the keypad are
stored in your phone’s notepad memory. This can be a
phone number that you called, or a number that you
entered but did not call. To retrieve the number stored in
the notepad:
62
Find the Feature
M
>
Recent Calls >Notepad
PressTo
N
or
M
or
STORE
(+)create a phonebook entry
call the number
open the
number or insert a special
character
with the number in the
Dialing Menu
to attach a
No.
field
Attaching a Number
While dialing (with digits visible in the display):
PressTo
M
>
Attach Number
attach a number from the
phonebook or recent calls
lists
Calling With Speed Dial
Each entry you store in your phonebook is assigned a
unique speed dial number.
To see an entry’s speed dial number, press
>
Phonebook
To speed dial a phonebook entry:
, scroll to the entry, press
VIEW
(+).
M
Calling Features
PressTo
1
keypad keysenter the speed dial number
for the entry you want to call
63
PressTo
2
#
3
N
submit the number
call the entry
Calling With 1-Touch Dial
To call phonebook entries 1 through 9, press and hold the
single-digit speed dial number for one second.
Tip:
You must specify which phone number list you want to
use with this feature: phone memory phonebook or SIM
card phonebook (see page 76).
Using Voicemail
Voicemail messages that you receive are stored on the
network. To listen to your messages, you must call your
voicemail phone number.
Your service provider may include additional information
Calling Features
about using this feature.
Listening to Voicemail Messages
Find the Feature
The phone calls your voicemail phone number. If no
voicemail number is stored, your phone prompts you to
store a number.
M
>
Messages >Voicemail
Receiving a Voicemail Message
When you receive a voicemail message, your phone
displays the
Voicemail notification.
64
f
(voicemail message) indicator and a New
PressTo
CALL
(+)listen to the message
The phone calls your voicemail phone number. If no
voicemail number is stored, your phone prompts you to
store a number.
Storing Your Voicemail Number
If necessary, use the following procedure to store your
voicemail phone number on your phone. Usually, your
service provider has already done this for you.
Find the Feature
PressTo
1
keypad keysenter your voicemail number
2OK(+)store the number
You cannot store a
character in this number. If you want to store a
voicemail number with these characters, create a
phonebook entry for it. Then, you can use the entry to
call your voicemail.
For more about these characters, see the More Here
guide.
M
>
Messages
M
>
Voicemail Setup
p
(pause), w (wait), or n (number)
Using Call Waiting
When you are on a call, an alert tone sounds to
032380o
indicate that you have received a second call.
Calling Features
65
PressTo
1
N
2
SWITCH
(+)
or
LINK
(-)
or
M
>
EndCallOnHold
You must turn on call waiting to use the feature. To turn call
waiting on or off:
answer the new call
switch between calls
connect the 2 calls
end the call on hold
Find the Feature
Calling Features
Putting a Call On Hold
PressTo
HOLD
(+) (if
available)
or
M
>
Hold
M
put the call on hold
Transferring a Call
You can announce that you are transferring an
032380o
active call to another party, or you can directly
transfer the call.
66
>
Settings >In-Call Setup
>
Call Waiting
Announce the Call Transfer
Find the Feature
PressTo
1
keypad keysdial the number where you
2
N
3
M
4
S
5
SELECT
(+)select
6OK(+)confirm the transfer
M
>
Hold
are transferring the call
call the number and speak to
the person who answers
open the menu
scroll to
Transfer
Transfer
Do Not Announce the Call Transfer
Find the Feature
PressTo
1
keypad keysdial the number where you
2
N
M
>
Transfer
are transferring the call
transfer the call
Calling Features
67
Phone Features
Menu Map
Main Menu
n
Phonebook
s
Recent Calls
• Received Calls
• Dialed Calls
• Notepad
•Call Times
•Call Cost
• Data Times
• Data Volumes
e
Messages
• Create Message
• Message Inbox
•Voicemail
• Browser Msgs
• Info Services
• Quick Notes
• Outbox
• Drafts
Phone Features
• MMS Templates
É
Office Tools
• SIM Tool Kit Apps *
•Calculator
• Datebook
• Shortcuts
•Alarm Clock
• Chat
• Dialing Services
Q
Games & Apps
• Voice Dial
• Fixed Dial
• Quick Dial
• Service Dial *
á
Web Access
•Browser
• Web Shortcuts
• Stored Pages
•History
•Go To URL
• Browser Setup
• Web Sessions
h
Multimedia
•Themes
•Camera
•Pictures
• Sounds
• MotoMixer
• Videos
ã
IM
• Log In
• Offline Confs.
• Offline Settings
•Help
w
Settings
• (see next page)
* optional features
This is the standard main
menu layout. Menu
organization and feature
names may vary on your
phone. Not all features
may be available on your
phone.
68
Settings Menu
l
Personalize
• Home Screen
• Main Menu
• Color Style
•Greeting
• Wallpaper
• Screen Saver
•Quick Dial
t
Ring Styles
•Style
• style Detail
• Ring Lights
• Event Lights
H
Call Forward
• Voice Calls
•Fax Calls
• Data Calls
• Cancel All
• Forward Status
U
In-Call Setup
•In-Call Timer
• Call Cost Setup
• My Caller ID
• Talk and Fax
•Answer Options
• Call Waiting
Z
Initial Setup
• Time and Date
•1-Touch Dial
• Display Timeout
• Backlight
• TTY Setup
•Scroll
• Language
• Contrast
•DTMF
•Master Reset
• Master Clear
m
Phone Status
•My Tel. Numbers
• Credit Info/Available *
• Active Line
• Battery Meter
• Other Information
S
Headset
• Auto Answer
•Voice Dial
J
Car Settings
• Auto Answer
• Auto Handsfree
• Power-Off Delay
• Charger Time
j
Network
• New Network
• Network Setup
• Available Networks
• My Network List
• Service Tone
• Call Drop Tone
u
Security
• Phone Lock
• Lock Keypad
• Lock Application
•Fixed Dial
• Call Barring
• SIM PIN
•New Passwords
c
Java Settings
•Java System
• Delete All Apps
• App Vibration
• App Volume
• App Priority
• App Backlight
• Set Standby App
• DNS IP
* optional features
Phone Features
69
Feature Quick Reference
This section helps you locate features on your phone that
are not described in this guide. For more detailed
information, see the More Here guide (described on
page 12).
Calling Features
FeatureDescription
Conference
Call
Call
Forwarding
Call Barring
TTY Calls
Phone Features
During a call:
M
>
Hold
, dial next
number, press
LINK
(-)
Set up or cancel call
forwarding:
M
>
Settings >Call Forward
Restrict outgoing or
incoming calls:
M
>
Settings >Security
>
Call Barring
Set up your phone for
use with an optional
TTY device:
M
>
Settings
>
Initial Setup >TTY Setup
N
, press
032380o
032380o
032380o
70
Messages
FeatureDescription
Send Text
Message
Send
Multimedia
Message
Use MMS
Template
Read Message
Store Message
Objects
Send a text message:
M
>
Messages
>
Create Message
>
New Short Message
Send a multimedia
message:
M
>
Messages
>
Create Message >New Multimedia Msg
Open an MMS template
with preloaded media:
M
>
Messages
>
Create Message >MMS Templates
Read a new text or
multimedia message that
you have received:
Press
READ
Go to a multimedia
message slide, then:
M
>
Store
(+).
032380o
032380o
032380o
032380o
032380o
Phone Features
71
Instant Messaging
FeatureDescription
Log In
Find Others
Online
Start
Conversation
Open Active
Conversation
End
Conversation
Phone Features
Log Out
Log in to instant
messaging:
M
>IM >
Log In
After you log in:
Select
Contact List
list of other users.
Start a conversation:
From your
highlight a name in
Online Contacts
Open a conversation in
progress:
From your
highlight a name in
press
VIEW
From the conversation
display:
M
>
End Conversation
Log out of instant
messaging:
Select
Log Out
IM Online
menu.
to see a
Contact List
, press
Contact List
(+).
from the
,
SEND IM
,
Conversations
032380o
032380o
032380o
(+).
032380o
,
032380o
032380o
72
Chat
FeatureDescription
Start Chat
Receive Chat
Request
End Chat
Start a new chat session:
M
>
Office Tools >Chat
M
>
New Chat
When you receive a chat
request:
Press
ACCEPT
IGNORE
(-).
During a chat session:
M
>
End Chat
Phonebook
032380o
032380o
(+) or
032380o
FeatureDescription
Create Entry
Create Group
Mailing List
Create a new phonebook entry:
M
>
Phonebook
M
>
New >Phone Number
Email Address
Create a group mailing list as a
phonebook entry:
M
>
Phonebook
M
>
New >Mailing List
Phone Features
or
73
FeatureDescription
Dial Number
Voice Dial
Number
Set Ringer ID
for Entry
Set Picture ID
for Entry
Phone Features
Call a number stored in the
phonebook:
M
>
Phonebook
phonebook entry, press
Voice dial a number stored in the
phonebook:
>
Office Tools >Dialing Services >Voice Dial
When prompted, say the entry’s
name (within 2 seconds).
Assign a distinctive ringer alert to
a phonebook entry:
M
>
Phonebook
M
>
Edit >Ringer ID
Note:
The
available for entries stored on the
SIM card.
Assign a picture to display when
you receive calls from an entry:
M
>
Phonebook
M
>
Edit >Picture
Note:
The
available for entries stored on the
SIM card.
, highlight the
> entry
> ringer name
Ringer ID
option is not
> entry
> picture
Picture
option is not
N
to call
74
FeatureDescription
Set Category
for Entry
Set Category
View
Set Category
Light ID
Sort
Phonebook
List
Set the category for a phonebook
entry:
M
>
Phonebook
M
>
Edit >Category
> category name
Note:
The
Category
available for entries stored on the
SIM card.
Set a phonebook category view:
M
>
Phonebook
M
>
Categories
Set a distinctive light pattern to be
displayed when you receive calls
from phonebook entries in a
specific category:
M
>
Phonebook
M
>
Categories
press
M
>
Note:
The
Light ID
available for entries stored on the
SIM card.
Set the order in which phonebook
entries are listed:
M
>
Phonebook
M
>
Setup >Sort by
> entry
option is not
> category view
Phone Features
, scroll to entry,
Edit >Light ID
option is not
> sort order
75
FeatureDescription
Set Primary
Number
1-Touch Dial
Personalizing Features
FeatureDescription
Ring Style
Ringer IDs
Phone Features
Ring Volume
Set the primary number for a
phonebook entry with multiple
numbers:
M
>
Phonebook
press
M
number
Set 1-touch dial to call entries
stored in your phone memory
phonebook or the SIM card
phonebook:
M
>
Settings >Initial Setup >1-
Touch Dial
Change the ring alert for an event:
M
>
Settings >Ring Styles
>style
Activate distinctive ring alerts
assigned to phonebook entries:
M
>
Settings >Ring Styles
>style
Set ringer volume:
M
>
Settings >Ring Styles
>style
Shortcut:
the home screen.
, scroll to entry,
>
Set Primary
Detail
> event name
Detail >Ringer IDs
Detail >Ring Volume
Press S right or left in
> phone
76
FeatureDescription
Keypad
Volu me
Clock View
Menu View
Main Menu
Change Soft
Key Labels
Shortcuts
Set keypad keypress volume:
M
>
Settings >Ring Styles
>style
Detail >Key Volume
Display an analog clock or digital
time readout in the home screen:
M
>
Settings >Personalize
>
Home Screen >Clock
Display the main menu as graphic
icons or as a text-based list:
M
>
Settings >Personalize >Main Menu
>
View
Reorder your phone’s main menu:
M
>
Settings >Personalize >Main Menu
>
Reorder
Change soft key labels in the
home screen
M
>
Settings>Personalize
>
Home Screen >Home Keys
Create a shortcut to a menu item:
Highlight the menu item, then
press and hold
Select a shortcut:
M
>
Office Tools>Shortcuts
> shortcut name
M
Phone Features
.
77
Menu Features
FeatureDescription
Language
Master Reset
Master Clear
Phone Features
Set menu language:
M
>
Settings >Initial Setup >Language
Reset all options except unlock
code, security code, and lifetime
timer:
M
>
Settings >Initial Setup
>
Master Reset
Reset all options except unlock
code, security code, and lifetime
timer, and clear all user settings
and entries except SIM card
information:
M
>
Settings >Initial Setup
>
Master Clear
78
Dialing Features
FeatureDescription
Fixed Dial
Service Dial
When you turn on fixed
dialing, you can only call
numbers stored in the
fixed dial list.
Turn fixed dialing on or off:
M
>
Settings >Security >Fixed Dial
Use the fixed dial list:
M
>
Office Tools >Dialing Services
>
Fixed Dial
Dial service phone
numbers:
M
>
Office Tools
>
Dialing Services >Service Dial
032380o
032380o
Phone Features
79
FeatureDescription
Quick Dial
DTMF Tones
Your service provider
may program your phone
with one or more quick
dial numbers, such as
the customer service number.
Dial preprogrammed phone
numbers:
M
>
Office Tools >Dialing Services
>
Quick Dial
Activate DTMF tones:
M
>
Settings >Initial Setup >DTMF
Send DTMF tones during a call:
Press number keys.
Send stored numbers as DTMF
tones during a call:
Highlight a number in the
phonebook or recent calls lists,
then press
M
>
Send Tones
Call Monitoring
Phone Features
Network connection time is the elapsed time from the
moment you connect to your service provider's network to
the moment you end the call by pressing
includes busy signals and ringing.
The amount of network connection time you track
on your resettable timer may not equal the amount
of time for which you are billed by your service
O
. This time
032380o
.
80
provider. For billing information, contact your service
provider.
FeatureDescription
Call Times
View call timers:
M
>
Recent Calls >Call Times
032380o
In-Call Timer
Call Cost
Display time or cost
information during a call:
M
>
Settings >In-Call Setup
>
In-Call Timer
View call cost
information:
M
>
Recent Calls >Call Cost
032380o
032380o
Handsfree Features
Note:
The use of wireless devices and their accessories
may be prohibited or restricted in certain areas. Always
obey the laws and regulations on the use of these
products.
Phone Features
81
FeatureDescription
Speakerphone
Auto Answer
(car kit or
headset)
Voice Dial
(headset)
Auto
Handsfree
(car kit)
Phone Features
Activate a connected
external speakerphone
during a call:
Press
SPEAKER
(+) (if
available) or
Automatically answer
calls when connected
to a car kit or headset:
M
>
>
Car Settings
Enable voice dial with
headset send/end key:
M
>
>
Voice Dial
Automatically route
calls to a car kit when
connected:
M
>
>
Car Settings >Auto Handsfree
M
>
Settings
or
Headset >Auto Answer
Settings >Headset
Settings
Spkrphone On
82
FeatureDescription
Power-Off
Delay
(car kit)
Charger Time
(car kit)
Set the phone to stay
on for a specified time
after the ignition is
switched off:
M
>
Settings >Car Settings >Power-
Off Delay
Charge the phone for a
specified time after the
ignition is switched off:
M
>
Settings
>
Car Settings >Charger Time
Data and Fax Calls
FeatureDescription
Send Data or
Fax
Receive Data
or Fax
Talk Then Fax
Connect your phone to
the device, then place
the call through the
device application.
Connect your phone to
the device, then answer
the call through the
device application.
Connect your phone to
the device, enter the
number, press
M
>
Talk Then Fax
press
N
to make the call.
Phone Features
, then
83
Network Features
FeatureDescription
Network
Settings
View network information
and adjust network
settings:
M
>
Personal Organizer Features
FeatureDescription
Create
Datebook
Event
View or Edit
Datebook
Event
Event
Reminder
Phone Features
Set Alarm
Create a new datebook event:
M
>
the day, press the center select
button, press
View or edit event details:
M
>
the day, press the center select
button, press
View event reminder:
VIEW
(+)
Close event reminder:
EXIT
(-)
Set an alarm:
M
>
Settings >Network
Office Tools >Datebook
M
>
New
Office Tools >Datebook
VIEW
(+)
Office Tools >Alarm Clock
032380o
, highlight
, highlight
84
FeatureDescription
Turn Off Alarm
Calculator
Currency
Converter
Turn off alarm:
Press
DISABLE
Set 8-minute delay:
Press
SNOOZE
Calculate numbers:
M
>
Office Tools >Calculator
Convert currency:
M
>
Office Tools >Calculator
M
>
Exchange Rate
Enter exchange rate, press
OK
(+), enter amount, and select
$
in the bottom of the display.
Security
(-) or O.
(+).
FeatureDescription
SIM PIN
Lock
Application
Lock or unlock the SIM card:
M
>
Settings >Security >SIM PIN
Caution:
PIN code 3 times in a row, your
SIM card is disabled and your
phone displays
Lock phone applications:
M
>
Lock Application
If you enter an incorrect
>
Settings >Security
SIM Blocked
Phone Features
.
85
News and Entertainment
FeatureDescription
Launch MicroBrowser
Download
Objects from
Web Page
Web Sessions
Apply Phone
Theme
Download
Game or
Phone Features
Application
(micro-browser)
Start a micro-browser
session:
M
>
Web Access >Browser
Download a picture,
sound, or phone theme
from a Web page:
Highlight the file, press
press
STORE
(+).
Select or create a Web
session:
M
>
Web Access
>
Web Sessions
Apply a grouped set of
image and sound files to
your phone:
M
>
Multimedia >Themes
Download a Java game
or application with the
micro-browser:
M
>
Web Access >Browser
the application, press
press
DWNLOAD
(+)
SELECT
>theme
SELECT
032380o
032380o
(+),
032380o
032380o
032380o
, highlight
(+),
86
FeatureDescription
Download
Game or
Application
(computer)
Launch Game
or Application
Manage
Pictures
Manage
Sounds
Manage Video
Clips
Edit Sounds
With
MotoMixer
Download a Java game
or application from a
computer:
Connect your phone to the
computer, press
>
Java Settings >Java App Loader
Launch a Java game or
application:
M
>
Games & Apps
highlight the application, press
SELECT
(+)
Manage pictures and
animations:
M
>
Multimedia >Pictures
Manage ring tones, sounds that
you have composed or
downloaded:
M
>
Multimedia >Sounds
Manage video clips:
M
>
Multimedia >Videos
Edit MIDI-based sound files that
you can use with your phone:
M
>
Multimedia >MotoMixer >[New
Mix]
or mix file name
M
,
>
Settings
.
032380o
032380o
032380o
Phone Features
87
FeatureDescription
Create Ring
Tones
Camera
Create ring tones that you can use
with your phone:
M
>
Multimedia >Sounds
>
[New iMelody]
Adjust light level and other
settings for the integrated camera:
M
>
Multimedia >Camera
M
>
Pictures Setup
Phone Features
88
Specific Absorption Rate Data
The model wireless phone meets the government’s
requirements for exposure to radio waves.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission (FCC) of the U.S.
Government and by the Canadian regulatory authorities. These limits are
part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards
that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all
persons, regardless of age or health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC and by the Canadian regulatory authorities is 1.6 W/
1
kg.
Tests for SAR are conducted using standard operating positions
accepted by the FCC and by Industry Canada with the phone transmitting
at its highest certified power level in all tested frequency bands. Although
the SAR is determined at the highest certified power level, the actual SAR
level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels
so as to use only the power required to reach the network. In general, the
closer you are to a wireless base station, the lower the power output.
Before a phone model is available for sale to the public in the U.S. and
Canada, it must be tested and certified to the FCC and Industry Canada
that it does not exceed the limit established by each government for safe
exposure. The tests are performed in positions and locations (e.g., at the
ear and worn on the body) reported to the FCC and available for review by
Industry Canada. The highest SAR value for this model phone when
tested for use at the ear is 1.20 W/kg, and when worn on the body, as
described in this user guide, is 0.84 W/kg. (Body-worn measurements differ
89
among phone models, depending upon available accessories and
regulatory requirements).
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the governmental requirements for
safe exposure. Please note that improvements to this product model
could cause differences in the SAR value for later products; in all cases,
products are designed to be within the guidelines.
Additional information on Specific Absorption Rates (SAR) can be found
on the Cellular Telecommunications & Internet Association (CTIA) Web
site:
http://www.phonefacts.net
or the Canadian Wireless Telecommunications Association (CWTA) Web
site:
http://www.cwta.ca
1. In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and
to account for any variations in measurements.
2. The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for
this product.
2
90
Consumer Information on
032372o
Wireless Phones from FDA
Additional Health and Safety Information
The U.S. Food and Drug Administration (FDA) provides consumer
information on wireless phones at:
cellphones/qa.html.
answers discussed at this web site.
http://www.fda.gov/
Following are safety-related questions and
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems
are associated with using wireless phones. There is no proof, however,
that wireless phones are absolutely safe. Wireless phones emit low levels
of radio frequency energy (RF) in the microwave range while being used.
They also emit very low levels of RF when in the stand-by mode. Whereas
high levels of RF can produce health effects (by heating tissue), exposure
to low level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low level RF exposures have not
found any biological effects. Some studies have suggested that some
biological effects may occur, but such findings have not been confirmed
by additional research. In some cases, other researchers have had
difficulty in reproducing those studies, or in determining the reasons for
inconsistent results.
What is FDA's role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of radiation-emitting
consumer products such as wireless phones before they can be sold, as it
does with new drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the user. In such a
case, FDA could require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or recall the phones so
that the hazard no longer exists.
91
Although the existing scientific data do not justify FDA regulatory actions,
FDA has urged the wireless phone industry to take a number of steps,
including the following:
•
Support needed research into possible biological effects
of RF of the type emitted by wireless phones;
•
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
•
Cooperate in providing users of wireless phones with the
best possible information on possible effects of wireless
phone use on human health.
FDA belongs to an interagency working group of the federal agencies that
have responsibility for different aspects of RF safety to ensure
coordinated efforts at the federal level. The following agencies belong to
this working group:
•
National Institute for Occupational Safety and Health
•
Environmental Protection Agency
•
Federal Communications Commission
•
Occupational Safety and Health Administration
•
National Telecommunications and Information
Administration
The National Institutes of Health participates in some interagency working
group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the
Federal Communications Commission (FCC). All phones that are sold in
the United States must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies for safety
questions about wireless phones.
92
FCC also regulates the base stations that the wireless phone networks
rely upon. While these base stations operate at higher power than do the
wireless phones themselves, the RF exposures that people get from
these base stations are typically thousands of times lower than those they
can get from wireless phones. Base stations are thus not the primary
subject of the safety questions discussed in this document.
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with
groups of investigators around the world to ensure that high priority
animal studies are conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception in
1996. An influential result of this work has been the development of a
detailed agenda of research needs that has driven the establishment of
new research programs around the world. The Project has also helped
develop a series of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA)
have a formal Cooperative Research and Development Agreement
(CRADA) to do research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in government, industry,
and academic organizations. CTIA-funded research is conducted through
contracts to independent investigators. The initial research will include
both laboratory studies and studies of wireless phone users. The CRADA
will also include a broad assessment of additional research needs in the
context of the latest research developments around the world.
93
What steps can I take to reduce my exposure to
radio frequency energy from my wireless
phone?
If there is a risk from these products--and at this point we do not know that
there is--it is probably very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a key factor in how
much exposure a person receives, reducing the amount of time spent
using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day,
you could place more distance between your body and the source of the
RF, since the exposure level drops off dramatically with distance. For
example, you could use a headset and carry the wireless phone away
from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are
harmful. But if you are concerned about the RF exposure from these
products, you can use measures like those described above to reduce
your RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless
phones, including children and teenagers. If you want to take steps to
lower exposure to radio frequency energy (RF), the measures described
above would apply to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that
children be discouraged from using wireless phones at all. For example,
the government in the United Kingdom distributed leaflets containing such
a recommendation in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by children was strictly
94
precautionary; it was not based on scientific evidence that any health
hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from
wireless phones, there is no reason to believe that hands-free kits reduce
risks. Hands-free kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of RF energy in the
head because the phone, which is the source of the RF emissions, will not
be placed against the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in the U.S.
are required to meet safety requirements regardless of whether they are
used against the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to
shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from
wireless phones, there is no reason to believe that accessories that claim
to shield the head from those emissions reduce risks. Some products that
claim to shield the user from RF absorption use special phone cases,
while others involve nothing more than a metallic accessory attached to
the phone. Studies have shown that these products generally do not work
as advertised. Unlike “hand-free” kits, these so-called “shields” may
interfere with proper operation of the phone. The phone may be forced to
boost its power to compensate, leading to an increase in RF absorption.
In February 2002, the Federal Trade Commission (FTC) charged two
companies that sold devices that claimed to protect wireless phone users
from radiation with making false and unsubstantiated claims. According to
FTC, these defendants lacked a reasonable basis to substantiate their
claim.
95
Motorola Limited Warranty for
the United States and Canada
Warranty
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants its
telephones, pagers, messaging devices, and consumer and professional
two-way radios (excluding commercial, government or industrial radios)
that operate via Family Radio Service or General Mobile Radio Service,
Motorola-branded or certified accessories sold for use with these
Products (“Accessories”) and Motorola software contained on CD-ROMs
or other tangible media and sold for use with these Products (“Software”)
to be free from defects in materials and workmanship under normal
consumer usage for the period(s) outlined below. This limited warranty is
a consumer's exclusive remedy, and applies as follows to new Motorola
Products, Accessories and Software purchased by consumers in the
United States or Canada, which are accompanied by this written
warranty:
Products and Accessories
Products CoveredLength of Coverage
Products and
Accessories
above, unless otherwise
provided for below.
Decorative Accessories
and Cases.
covers, bezels,
PhoneWrap™ covers and
cases.
as defined
Decorative
One (1) year
by the first consumer purchaser of the
product unless otherwise provided for
below.
Limited lifetime warranty
of ownership by the first consumer
purchaser of the product.
from the date of purchase
for the lifetime
96
Products CoveredLength of Coverage
Monaural Headsets.
buds and boom headsets
that transmit mono sound
through a wired connection.
Consumer and
Professional Two-Way
Radio Accessories.
Products and
Accessories that are
Repaired or Replaced.
Exclusions
Normal Wear and Tear.
parts due to normal wear and tear are excluded from coverage.
Batteries.
their rated capacity and batteries that leak are covered by this limited
warranty.
Abuse & Misuse.
operation, storage, misuse or abuse, accident or neglect, such as physical
damage (cracks, scratches, etc.) to the surface of the product resulting
from misuse; (b) contact with liquid, water, rain, extreme humidity or
heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of
the Products or Accessories for commercial purposes or subjecting the
Product or Accessory to abnormal usage or conditions; or (d) other acts
which are not the fault of Motorola, are excluded from coverage.
Use of Non-Motorola Products and Accessories.
that result from the use of Non-Motorola branded or certified Products,
Accessories, Software or other peripheral equipment are excluded from
coverage.
Unauthorized Service or Modification.
from service, testing, adjustment, installation, maintenance, alteration, or
Only batteries whose fully charged capacity falls below 80% of
Ear
Limited lifetime warranty
of ownership by the first consumer
purchaser of the product.
Ninety (90) days
purchase by the first consumer
purchaser of the product.
The balance of the original warranty
or for ninety (90) days
returned to the consumer, whichever is
longer.
Periodic maintenance, repair and replacement of
Defects or damage that result from: (a) improper
Defects or damages resulting
for the lifetime
from the date of
from the date
Defects or damage
97
modification in any way by someone other than Motorola, or its authorized
service centers, are excluded from coverage.
Altered Products.
date tags that have been removed, altered or obliterated; (b) broken seals
or that show evidence of tampering; (c) mismatched board serial
numbers; or (d) nonconforming or non-Motorola housings, or parts, are
excluded from coverage.
Communication Services.
Accessories or Software due to any communication service or signal you
may subscribe to or use with the Products Accessories or Software is
excluded from coverage.
Software
Products CoveredLength of Coverage
Software.
defects in the media that embodies the
copy of the software (e.g. CD-ROM, or
floppy disk).
Exclusions
Software Embodied in Physical Media.
software will meet your requirements or will work in combination with any
hardware or software applications provided by third parties, that the
operation of the software products will be uninterrupted or error free, or
that all defects in the software products will be corrected.
Software NOT Embodied in Physical Media.
embodied in physical media (e.g. software that is downloaded from the
internet), is provided “as is” and without warranty.
Products or Accessories with (a) serial numbers or
Defects, damages, or the failure of Products,
Applies only to physical
Ninety (90) days
date of purchase.
No warranty is made that the
Software that is not
from the
Who Is Covered?
This warranty extends only to the first consumer purchaser, and is not
transferable.
98
What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund the
purchase price of any Products, Accessories or Software that does not
conform to this warranty. We may use functionally equivalent
reconditioned/refurbished/pre-owned or new Products, Accessories or
parts. No data, software or applications added to your Product, Accessory
or Software, including but not limited to personal contacts, games and
ringer tones, will be reinstalled. To avoid losing such data, software and
applications please create a back up prior to requesting service.
How to Obtain Warranty Service or Other
Information
USAPhones
1-800-331-6456
Pagers
1-800-548-9954
Two-Way Radios and Messaging Devices
CanadaAll Products
TTY
For
Accessories
designated above for the product with which they are used.
You will receive instructions on how to ship the Products, Accessories or
Software, at your expense, to a Motorola Authorized Repair Center. To
obtain service, you must include: (a) a copy of your receipt, bill of sale or
other comparable proof of purchase; (b) a written description of the
problem; (c) the name of your service provider, if applicable; (d) the name
and location of the installation facility (if applicable) and, most importantly;
(e) your address and telephone number.
1-800-353-2729
1-800-461-4575
1-888-390-6456
and
Software
, please call the telephone number
99
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.