Motorola PTT Pod - 1693 user manual

Talkabout® Wireless BLUETOOTH® PTT Pod - 1693
Emergency Alert
Accessory Port
Bluetooth LED Indicator
Menu / Keypad Lock
Scan / Monitor
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light Button
Volume
Push to Talk (High)
Push to Talk (Low)
Scroll
Mini-USB Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light Button
Volume
Push to Talk (High)
Push to Talk (Low)
Scroll
Mini-USB Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Numbers for Codes
Numbers for Channel, Call Tone
—Battery Meter
—Channel Power Indicator (see menu Options)
—Keypad Lock
—Talk Confirmation Tone (Roger Beep)
—Noise Filtering
—On/Off for each
—Bluetooth
feature
—Scan
—Call Tone, Keypad Tone
—Weather Alert
—Hands-Free Use Without Accessories
—Hands-Free Use With Accessories
—Dual Scan
—Vibrate
1:1 Scale
Emergency Alert
Accessory Port
Bluetooth LED Indicator
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Accessory Port
TX/RX LED Indicator
Bluetooth LED Indicator
Call Tone
Flash Light Button
Volume
Push to Talk (High)
Push to Talk (Low)
Scroll
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Accessory Port
TX/RX LED Indicator
Bluetooth LED Indicator
Call Tone
Flash Light Button
Volume
Push to Talk (High)
Push to Talk (Low)
Scroll
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Accessory Port
TX/RX LED Indicator
Bluetooth LED Indicator
Call Tone
Flash Light Button
Volume
Push to Talk (High)
Push to Talk (Low)
Scroll
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Accessory Port
TX/RX LED Indicator
Bluetooth LED Indicator
Call Tone
Flash Light Button
Volume
Push to Talk (High)
Push to Talk (Low)
Scroll
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Compatible with MU350R Series FRS/GMRS
You may call Motorola Solutions, Inc. as follows:
USA: 1-800-638-5119, e-mail us at support@giantintl.com or
visit us on the Internet at motorolasolutions.com/talkabout.
Important Safety Information
Please observe the following to ensure reliable operation of the PTT Pod:
1. Read this manual thoroughly and observe the operating instructions and information provided.
2. Do not expose the equipment to extreme temperatures or high relative humidity and protect it from direct sunlight and dusty conditions.
3. Clean the equipment with a soft, damp cloth. Do not use any solvents or aggressive cleaning agents.
5. Only use the power plug supplied.
6. Never open the unit. Opening the unit voids any claims under the terms of the warranty and exposes the person to the risk of an electric shock.
7. Repairs to defective units should only be carried out by Giant International Ltd.
8. Batteries built into device are NOT user replaceable. Discard entire device according to local regulations.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
PTT Pod - 1693 Product At-A-Glance
1
2
3
4
Turning on/off the PTT Pod - 1693
To turn on/off your PTT Pod, press and hold the power on/off button for about 2 seconds.
Charging the PTT Pod - 1693
The PTT Pod is equipped with a rechargeable battery that must be fully charged before you use it for the first time.
1. Connect the power adapter to the unit. Plug the AC adapter into the electrical outlet.
2. The LED indicator will be red while charging. If the LED indicator is not red, check the connection.
3. When the PTT Pod is fully charged, the red LED indicator will turn blue.
4. Remove the AC adapter from the PTT Pod.
Note: If charging while the PTT Pod is on, the PTT Pod will turn off automatically.
KEM-ML36802
User’s Guide
BLUETOOTH® 2-way Radio.
For further information
1. Power on/off button
2. Push-to-Talk (PTT) button
3. BLUETOOTH indicator
4. Headset Jack
5. Charging Port
5
®
LED
Enabling the MU350 Series Radio’s BLUETOOTH® Functionality
1. With the radio on, briefly press current setting On/Off will flash.
2. Press either the
3. Press PTT to save settings.
4. With the MU350 Series Radio BLUETOOTH the
button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH
5. Successful pairing will be indicated by a tone and brief flashing of the BLUETOOTH® LED indicator to confirm entry to connected mode.
Note: The PTT Pod can be used in various use case scenarios with various compatible products. See reference table on back page and below description of the various use cases. The MU350 Series radio can be paired with 2 BLUETOOTH® devices.
(A) Pairing the PTT Pod - 1693 with the MU350 Series Radio
1. Enable the MU350 Series Radio’s Bluetooth functionality (see above)
2. Ensure the PTT Pod is off.
3. Press and hold the power on/off button until the PTT Pod LED indicator light flashes blue and red alternatively.
4. With the MU350 Series Radio BLUETOOTH® enabled, press and hold the
button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH
5. Successful pairing will be indicated by a tone and brief flashing of the BLUETOOTH® LED indicator to confirm entry to connected mode.
6. If pairing was successful, the PTT Pod LED indicator will flash blue at 5 second intervals.
7. If pairing fails, turn the PTT Pod and the MU350 Series Radio off and repeat the above process.
Reconnecting the PTT Pod - 1693 to the FRS/GMRS radio
After initially pairing and connecting your FRS/GMRS radio and PTT Pod, when you turn on the PTT Pod, it will automatically reconnect with the paired FRS/GMRS radio; however, you can press the power on/off button
once to connect rapidly.
(B) Pairing your Bluetooth Headset to the MU350 Series Radio and the PTT Pod - 1693
The MU350 Series Radio BLUETOOTH® works with any qualified BLUETOOTH® headsets from BLUETOOTH® SIG, Inc.
1. Enable the MU350 Series Radio’s BLUETOOTH® Functionality (see above)
2. Pair with the PTT Pod (see “A” above)
3. Follow the BLUETOOTH® headset manufacturer’s instruction to enable its BLUETOOTH® function.
4. With the MU350 Series Radio BLUETOOTH® enabled, press and hold the
button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH
5. Successful pairing will be indicated by a tone and brief flashing of the BLUETOOTH® LED indicator to confirm entry to connected mode.
6. After successful pairing, you can talk and listen via the paired BLUETOOTH® headset.
(C) Using the Motorola VOX Headsets (with Microphone) - 56320/53725 connected to PTT POD. The connected 1693 is paired with the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the PTT Pod, plug your headset connector into the headset connector port located on the PTT Pod.
or the
until
appears on the LCD. The
button to select On.
®
enabled, press and hold
®
LED indicator on the radio will flash blue.
®
LED indicator on the radio will flash blue.
®
LED indicator on the radio will flash blue.
2. Press the PTT Pod button and speak into the headset’s microphone to transmit. Release the PTT Pod to receive transmission via the headset.
(D) Using Motorola Earpiece - 53728 (no Microphone) connected to the 1693 POD. The connected 1693 POD is paired to the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the PTT Pod, plug your earpiece connector into the headset connector port located on the PTT Pod.
2. Press the PTT Pod button and speak into the MU350 Series radio’s microphone to transmit. Release the PTT Pod to receive transmission via the earpiece.
(E) Using Motorola Headsets with Microphone - 53725 or 56320 connected to the MU350 Series Radio’s accessory jack. The PTT POD is paired with the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the PTT Pod, plug your headset connector into the headset connector port located on the MU350 Series Radio.
2. Press the PTT Pod button and speak into the headset’s microphone to transmit. Release the PTT Pod to receive transmission via the headset.
(F) Using the Motorola Earpiece - 53728 (no Microphone) connected to the MU350 Series Radio’s accessory jack. The connected PTT POD is paired with the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the PTT Pod, plug your earpiece connector into the headset connector port located on the MU350 Series Radio.
2. Press the PTT Pod button and speak into the radio’s microphone to transmit. Release the PTT Pod to receive transmission via the earpiece.
(G) Using a generic BT Headset with the MU350 Series Radio
1. Connect headset as described under “B” without following step 2.
PTT Pod LED Status under different operations mode
Status Instructions LED
Power on
Power off
Pairing mode
Stand by Ready for pairing
Paired Paired
PTT Press and hold PTT button
Release PTT Release PTT button
Charging Connect charger Steady red LED
Charged
Low Battery
Auto Power off
Press and hold power on/off button
button for 2 seconds
Press and hold the power on/off button button 4 seconds
1st time pairing: Press and hold power on/off button for 2 seconds when powering on. After 1st pairing: Press and hold
for 6 seconds when
powering on.
After Pod is connected to charger up to 3 hours
5 mins after connectable mode (no pairing)
Blue flashes 4 times
Red LED flashes for 1 second and then turns off
Red and blue LED flashes alternately
Blue LED flashes at a 2 second interval
Blue LED flashes at a 5 second interval
Steady Red LED (without headset)
Red and blue LED remains on (with headset)
Blue LED flashes at a 5 second interval
Steady blue LED. Red may flash periodically while maintaining full charge
Red LED flashes for 1 second and then turns off
LED is off
Item Use case PTT Buttons Speaker Active Microphone Active Advantages Disadvantages
A. 1693 POD paired to
the MU350 Series
Radio
B. 1693 POD paired to
the MU350 Series
Radio and a generic
BT Headset (also
paired to the MU350
Series radio)
C.
Motorola Headsets with Microphone -
53725 or 56320
connected to 1693
POD. The connected
1693 is paired with
the MU350 Series
Radio
D.
E.
F.
G. Generic BT Headset
Motorola
Headsets without
Microphone -
53728 connected
to the 1693 POD. The connected 1693 POD is paired to the MU350 Series Radio
Motorola Headsets with Microphone -
53725 or 56320
connected to the
MU350 Series
Radio’s accessory
jack. The 1693 POD
is paired with the MU350 Series Radio
Motorola
Headset without
Microphone -
53728 connected to
the MU350 Series
Radio’s accessory jack. The connected 1693 POD is paired
with the MU350
Series Radio
paired with the
MU350 Series Radio
Either the PTT
buttons on
the MU350
Series Radio
or the BT PTT POD
can be used
to transmit,
however,
only the
MU350 Series
Radio’s
“PTT” button
has the “Menu
confirm”
function.
Note: The PTT
Pod is boost
power only. There is no
low power
option.
MU350 Series
Radio PTT
button or the
PTT Pod.
MU350 Series
Radio’s Speaker
Generic BT Headset’s
Speaker
Motorola Headsets
with Microphone -
53725 or 56320
Speaker
Motorola Headsets
without Microphone -
53728 Speaker
Motorola Headsets
with Microphone -
53725 or 56320
Speaker
Motorola Headsets
without Microphone -
53728 Speaker
Generic BT Headset
Speaker
MU350 Series Radio’s
Microphone
Generic BT Headset
Microphone
Motorola Headsets
with Microphone -
53725 or 56320
Microphone
MU350 Series Radio’s
Microphone
Motorola Headsets
with Microphone -
53725 or 56320
Microphone
MU350 Series Radio’s
Microphone
Generic BT Headset
Microphone
• Large oversized PTT function
• No wires between PTT Pod and radio
• Large oversized PTT function
• No wires between radio, headset and PTT pod.
• Longer battery life for MU350 Series Radio.
• Large oversized PTT function
• No wires between PTT Pod and radio
• 53725/56320 microphone audio is superior to most generic BT headsets
• Longer battery life for MU350 Series Radio.
• Large oversized PTT function
• No wires between PTT Pod and radio
• Longer battery life for MU350 Series Radio.
• Large oversized PTT function
• No wires between PTT Pod and radio
• 53725/56320 microphone audio is superior to most generic BT headsets
• Longer battery life for MU350 Series Radio.
• Large oversized PTT function
• No wires between PTT Pod and radio
• Longer battery life for MU350 Series Radio.
• No wires
• Longer battery life for MU350 Series Radio.
You have to
use the MU350
Series Radio’s
Speaker and Microphone
N/A
You have to use
a Wired headset
connected to the
PTT Pod
You have to use
a wired headset
connected to the
PTT Pod
You have to
use the MU350
Series Radio’s
Microphone
You have to use
a Wired headset
connected to the
MU350 Series
Radio
You have to use
a wired headset
connected to the
MU350 Series
Radio
You have to
use the MU350
Series Radio’s
PTT button
FCC COMPLIANCE INFORMATION
MOTOROLA Talkabout® PTT Pod Model: 1693
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authorit y to operate the equipment.
Limited 90 Day Warranty for Accessories Coverage: Giant International Ltd. warrants this accessory against defects
in materials and workmanship under normal use for 90 days from the date of purchase. Giant International Ltd., at its option, will at no charge repair, replace or refund the purchase price of any accessories that do not conform to this warranty. This warranty is valid only in the United States and Canada and extends to the first purchaser only and is not transferable.
Exclusions: This warranty does NOT cover batteries, defects or damage resulting from misuse, accident or neglect, improper operation or alteration, normal wear and tear, cosmetic or surface damage, or accessories on which serial numbers or date tags have been altered. DAMAGES OR DEFECTS RESULTING FROM SERVICE WORK PERFORMED BY SERVICE CENTERS NOT AUTHORIZED BY GIANT INTERNATIONAL LTD. ARE NOT COVERED BY THIS WARRANTY.
Obtaining Service: To obt ain warranty service, call 1-800-638-5119 in the USA and Canada. All accessories must be shipped to a Giant International Ltd. Service Center freight and insurance prepaid by the consumer, and include dated proof of purchase, description of problem, and the consumer’s address and telephone number.
Conditions: REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE GIVEN ONLY IF SPECIFICALLY REQUIRED BY APPLICABLE LAW. IN NO EVENT SHALL MOTOROLA OR GIANT INTERNATIONAL LTD. BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some st ates and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
Manufactured, distributed or sold by Giant International Ltd., official
licensee for this product. MOTOROLA, MOTOROLA SOLUTIONS and
the Stylized M Logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under license. All
other trademarks are the property of their respective owners.
Patent and Copyright Information
©2013 Motorola Solutions, Inc. All rights reserved.
Loading...