MOTOROLA PIP11
DIGITAL AUDIO BABY MONITOR
For: PIP11
User Guide
Safety instructions
WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep
this cord out of the reach of children (more than 1 metre away).
Never use extension cords with AC Adaptors. Only use the AC
Adaptors provided.
Baby monitor setup and use:
• Determine a location for the baby unit that will allow you to hear your baby
in his/her cot.
• Place the baby unit on a flat surface, such as a dresser, bureau, or shelf or
mount the unit to a wall securely using the keyhole slots under the stand.
• NEVER place the baby unit or cords within the cot.
WARNING
This digital audio baby monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the User
Guide, safe to use. Therefore, always read the instructions in this User Guide
carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This digital audio baby monitor is not a substitute for responsible adult
supervision.
• Keep this User Guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the digital audio baby monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the digital audio baby monitor in damp areas or close to water.
• Do not install the digital audio baby monitor in extreme cold or heat, direct
sunlight, or close to a heat source.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adaptors to easily accessible mains power.
CAUTION
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Welcome...
to your new Motorola PIP11 Audio Baby Monitor!
• Secure, interference free reception and high-quality sound.
• Long range up to 160 feet indoors and 1000 feet outdoors.
• Bright backlit inverse display with 12 language options.
• Two-way talk back between the baby and parent units.
• Temperature sensor, with high and low alarms.
• 5 lullabies, night light, volume control and microphone with high sensitivity.
• Battery powered portable parent unit.
• Expandable up to 2 parent units.
• Parent unit with mute function and alert indicator.
• Out of range and low battery alarm.
Need help?
If you have any problems setting up or using your PIP11, please visit us at
motorolanursery.com/support.
Alternatively, you may find the answer in the ‘Help’ section at the back of
this guide.
This User Guide provides you with all the information
you need to get the most from your digital audio
baby monitor.
Read the instructions carefully, and be aware that
this digital audio baby monitor is only intended as an
aid. It is not a substitute for responsible and proper
adult supervision.
Before you use the digital audio baby monitor, set
up the parent and baby units. Follow the simple
instructions in ‘Getting started’, on the next few
pages.
Important
Only use the power adaptors supplied.
Got everything?
• Parent unit
• Baby unit
• Rechargeable Ni-MH battery cells for the parent unit
• AC power adaptor for the parent unit
• AC power adaptor for the baby unit
If you have purchased PIP11 dual parent units, you will also have the
following additional items:
• Parent unit
• Rechargeable Ni-MH battery cells for the parent unit
• AC power adaptor for the parent unit
1. Getting started ...................................................................7
2. Getting to know your baby monitor ..........................11
3. Using the digital audio baby monitor ...................... 14
3.1 Turn the baby unit on / o ...........................................................................14
3.2 Turn the parent unit on / o ........................................................................14
3.3 Adjust the speaker volume on the parent unit .....................................14
3.4 Turn the night light on or o .......................................................................14
3.5 Select a lullaby for your baby .....................................................................14
3.5.1 Play and stop the lullaby ...............................................................14
3.5.2 Select a default volume level .....................................................14
3.5.3 Select a lullaby ..................................................................................15
3.5.4 Set the playback timer .................................................................15
3.6 Select a display language for the parent unit .......................................15
3.7 Turn sound alert on or o .............................................................................15
3.8 Set the temperature alert .............................................................................15
3.8.1 Set the temperature unit ...............................................................15
3.8.2 Set the temperature range ...........................................................15
3.9 Turn the key tone on or o ..........................................................................16
3.10 Restore default settings ................................................................................16
3.11 Default settings ...............................................................................................16
3.12 Two-way talk ......................................................................................................16
4. Help ........................................................................................17
5. Technical Specifications .................................................18
6. General information ........................................................ 19
6
1. Getting started
Location
Important
Do not place your PIP11 in the bathroom or other humid areas.
Place your units within reach of the AC power outlet and wall socket. The
socket-outlet should be installed near the equipment and should be easily
accessible.
Range of parent and baby units
Make sure the distance between the parent unit and baby unit is less than 300
metres.
Setting up
Important
The baby unit must be plugged into the AC power at all times. Use only the AC
power adaptor supplied with the product.
7Getting started
Connecting the baby unit
1. Plug the DC plug of the power adaptor into the DC jack on the rear of the
baby unit and plug the other end of the AC adaptor into the AC power
outlet.
2. Switch on the AC power.
Installing batteries into the parent unit
1. Lift up the battery cover to remove it from the the parent unit.
8 Getting started
2. Insert the rechargeable Ni-MH battery cells supplied. Note the ’+’ and
’-’ markings inside the battery compartment and insert in the correct
direction.
3. Slide the battery cover back into place.
Important
Warning! Use only the approved rechargeable Ni-MH battery cells
(2 x AAA Ni-MH rechargeable batteries) supplied with your PIP11.
Connecting and charging the parent unit
You will need to carry out this process for the single or dual parent units.
1. Plug the DC plug of the power adaptor into the DC jack on the side of the
parent unit and plug the other end of the AC adaptor into the AC power
outlet.
2. Switch on the AC power. The parent unit turns on.
3. When charging the batteries for the first time, charge for at least 16 hours
continuously.
4. When the parent unit is fully charged,
display.
Note
Please make sure the batteries are installed in the parent unit.
will appear steadily on the
Getting started
9
Battery low warning
If
is shown on the display, recharge the parent unit before using it again.
When charging,
Battery performance
In ideal conditions, fully charged batteries should give up to 10 hours usage
time or up to 15 hours standby time on a single charge.
Note that new batteries do not reach their full capacity until they have been
put to normal use for several days.
The charge capacity of the rechargeable battery will reduce with time as it
wears out, giving the parent unit less usage / standby time. Eventually it will
need to be replaced.
Batteries and the parent unit may become warm during charging. This is
normal.
Your PIP11 is now ready for use.
will scroll on the display.
10 Getting started
2. Getting to know your baby monitor
A
B
C
D
Overview of your baby unit
Front view
Back view
E
A Night light (amber LED)
B Microphone
C Power button
Press and hold to turn the baby unit on or o.
D Power / Linking LED indicator
Turns on when the parent unit is powered on and linked to the baby unit.
Flashes when the parent and baby units are not linked with each other.
E Speaker
F Temperature sensor
G Power jack
F
G
11Getting to know your baby monitor
Overview of your parent unit
Front view
J
D
E
A
F
G
B
C
A Microphone
B Menu / OK
Enter the main menu.
Confirm menu options.
C Power jack
D Display
E Power / Linking LED indicator
Turns on when the parent unit is powered on and linked to the baby unit.
Flashes when the parent and baby units are not linked with each other.
F Scroll up / Volume up
Press to increase the speaker volume or scroll up in screen.
G Power button
Press and hold to turn the parent unit on or o.
Press to turn the night light of the baby unit on or o.
H Back / Two way talk
Press to go back to the previous level.
Press and hold to speak to your baby.
I Scroll down / Volume down / Mute
Press to decrease the speaker volume or scroll down in screen.
Press and hold to mute the speaker.
J Speaker
K Battery compartment
H
I
K
Back view
12
Getting to know your baby monitor
Screen display
Display icons
Turns on when the parent unit is connected and within range.
Flashes when the parent unit is not connected and out of range.
Turns on when listening to lullabies.
Turns on when the sound alert is activated.
Flashes when the sound alert is triggered.
Turns on when the speaker volume is o.
Turns on when the night light is on.
Indicates the current battery level.
Note
If you do not press any button on the parent unit for 30 seconds, the display
will automatically return to standby.
13Getting to know your baby monitor
3. Using the digital audio baby monitor
3.1 Turn the baby unit on / o
• Press and hold on the baby unit to turn it on. The power / linking LED
indicator will turn on.
• Press and hold
LED indicator will turn o.
3.2 Turn the parent unit on / o
• Press and hold
indicator will turn on.
• Press and hold
linking LED indicator will turn o.
Note
If you place the parent and baby units too close together, you may hear a high
pitched noise. This is not a fault. The units are designed to be operated at
some distance apart, e.g. in separate rooms, so move the units further apart.
If the power / linking LED indicator flashes on the parent unit, they are not
linked to each other. Make sure that both units are powered on, and the
distance between the parent and baby units is less than 300 metres.
3.3 Adjust the speaker volume on the parent unit
Press the up or down key to increase or decrease the volume. There are 5
levels to choose from.
3.4 Turn the night light on or o
on the parent unit.
Press
3.5 Select a lullaby for your baby
3.5.1 Play and stop the lullaby
1. Press
2.
3. Select
3.5.2 Select a default volume level
1. Press
2.
3. Scroll the down key to select
4. Scroll the up or down key to select a volume level, then press
MENU / OK
LULLABY
is displayed. Press
PLAY?
then press
stop on the parent and baby units. If
below), lullabies will play back one by one repeatedly.
MENU / OK
LULLABY
is displayed. Press
confirm.
on the baby unit again to turn it o. The power / linking
on the parent unit to turn it on. The power / linking LED
on the parent unit again to turn it o. The power /
on the parent unit.
MENU / OK
(if no lullaby is played) or
MENU / OK
to confirm. The selected lullaby will play back or
on the parent unit.
MENU / OK
VOLUME
.
STOP?
(if a lullaby is being played),
PLAY ALL
has been selected (see 3.5.3
.
, then press
MENU / OK
.
MENU / OK
to
14
Using the digital audio baby monitor
3.5.3 Select a lullaby
1. Press
2.
3. Scroll the down key to select
4. Select
3.5.4 Set the playback timer
1. Press
2.
3. Scroll the down key to select
4. Scroll the up or down key to select a time duration for lullaby playback,
MENU / OK
LULLABY
PLAY ALL
press
MENU / OK
MENU / OK
LULLABY
then press
on the parent unit.
is displayed. Press
or scroll the up or down key to select from 5 lullabies, then
to confirm.
on the parent unit.
is displayed. Press
MENU / OK
MENU / OK
CHOOSE
MENU / OK
TIMER
to confirm.
.
, then press
.
, then press
MENU / OK
MENU / OK
.
.
3.6 Select a display language for the parent unit
You can choose from 12 languages.
1. Press
2. Scroll the down key to select
3. Scroll the up or down key to select a language, then press
confirm.
MENU / OK
on the parent unit.
LANGUAGE
, then press
MENU / OK
MENU / OK
.
to
3.7 Turn sound alert on or o
You can turn on the sound alert so that the parent unit beeps when a loud
sound is detected by the baby unit.
1. Press
2. Scroll the down key to select
3. Select
MENU / OK
ON? / OFF?
on the parent unit.
SOUND ALERT
, then press
MENU / OK
, then press
to confirm.
MENU / OK
.
3.8 Set the temperature alert
The baby unit has a temperature sensor that can detect the baby room
temperature and send alert when the temperature is out of the set range.
3.8.1 Set the temperature unit
1. Press
2. Scroll the down key to select
3. Select °
4. Scroll the up or down key to select °
3.8.2 Set the temperature range
1. Press
2. Scroll the down key to select
3. Scroll the down key to select
MENU / OK
confirm.
MENU / OK
C / °F
, then press
on the parent unit.
TEMPERATURE
MENU / OK
on the parent unit.
TEMPERATURE
TEMP ALERT
, then press
to confirm.
C or °F
, then press
, then press
, then press
MENU / OK
MENU / OK
MENU / OK
MENU / OK
.
to
.
to confirm.
Using the digital audio baby monitor
15
4. Select
5. Press up or down key to set the high or low temperature range, then press
Note
The temperature range can be set from 14°C (57°F) to 39°C (102°F).
HIGH TEMP
MENU / OK
/
to confirm.
LOW TEMP
, then press
MENU / OK
to confirm.
3.9 Turn the key tone on or o
When you confirm a selection, you will hear a beep. You can switch the beep
on or o.
1. Press
2. Scroll the down key to select
3. Select
MENU / OK
ON?
then press
on the parent unit.
KEY TONE
(if it is currently set to o) or
MENU / OK
to confirm.
, then press
OFF?
MENU / OK
(if it is currently set to on),
.
3.10 Restore default settings
You can restore your baby monitor to its default (original) settings. All the
settings will be retained.
1. Press
2. Scroll the down key to select
3. When
MENU / OK
CONFIRM?
on the parent unit.
RESET
is displayed, press
, then press
MENU / OK
MENU / OK
.
.
3.11 Default settings
Speaker volume 3
Sound alert OFF?
Temperature unit °C
Language ENGLISH
Lullaby
• PLAY? / STOP? PLAY?
• CHOOSE PLAY ALL
• TIMER CONSTANT
• VOLUME VOLUME 3
Temperature range 14°C (57°F) to 39°C (102°F)
3.12 Two-way talk
You can use the Talk Back feature to comfort and reassure your baby. Whilst
using Talk Back you will not be able to hear your baby until you release the
button.
1. Press and hold the back / two way talk key on the parent unit to speak to
your baby, and the LED will flash.
2. Release the back / two way talk key to hear your baby again.
16
Using the digital audio baby monitor
4. Help
The power / linking LED Indicator on the parent unit does not turn on.
• Check whether the parent unit is powered on.
• Check whether the supplied batteries are correctly installed and not
drained.
• Connecting the parent unit to the mains power to recharge it.
The power / linking LED indicator on the parent unit flashes and ‘NOT
LINKED’ displayed on the screen.
• The parent unit and the baby unit may be out of range with each other.
Reduce the distance between the units, but not closer than 300 metres.
• The baby unit may be powered o. Press and hold
power it on.
The battery icon on the parent unit screen flashes.
• The battery level in the parent unit is low. Connect the parent unit to the
mains power with the supplied power adaptor to recharge it.
The parent unit beeps.
• The parent unit may have lost connection with the baby unit. Make sure the
distance between the parent unit and baby unit is less than 300 metres.
• The baby unit may be powered o. Press and hold
power it on.
• The battery level in the parent unit is low. Connect the parent unit to the
mains power with the supplied power adaptor to recharge it.
Unable to hear the sound or baby cry from the parent unit.
• The volume level in the parent unit may be set too low. Increase the volume
level of the parent unit. Refer to section 3.3 for volume level settings.
• The parent unit and the baby unit may be out of range with each other.
Make sure the distance between the parent unit and baby unit is less than
300 metres.
The Digital Audio Baby Monitor system produces a high-pitched noise.
• The parent unit and the baby unit are too close with each other. Make sure
the distance between the parent unit and baby unit is less than 300 metres.
• The speaker volume of the parent unit may be set too high. Decrease the
volume of the parent unit. Refer to section 3.3 for volume level settings.
The battery level in the parent unit is running low quickly.
• The volume level of the parent unit may be set too high, which consumes
more power. Decrease the volume level of the parent unit. Refer to
section 3.3 for volume level settings.
on the baby unit to
on the baby unit to
Help
17
5. Technical Specifications
RF frequency bands 1881.792MHz to 1897.344MHz (Europe)
1921.536 MHz to 1928.448 MHz (USA & Canada)
RF transmission power < 0.25 W (EU version)
Line of sight operating range
between the baby and parent
units
Power adaptor for the baby
and parent units
Parent unit battery
information
Battery life 10 hours (maximum)
ECO friendly Voice-activation
(VOX feature)
300 meters
DC 6.0V, 0.4A with DC round plug from:
Dongguan Everest Industrial Co., Ltd.
Address: No.2, Min Xing 1st Road, Shang Jiao,
Chang An Town, Dong Guan, GuangDong, China.
• EP19-060040WXLA for USA and Canada
• EP19A-060040WXEZ for Europe; OR
Shenzhen Huajin Electron Co., Ltd.
Address: Block E, Xing Zhongqiao Industrial
Park, Baolong Six Road, BaoLong Industrial City,
Longgang District, 518116 ShenZhen, China.
• HJ-0600400A1-US for USA and Canada
• HJ-0600400P1-EU for Europe
NIMH 550mAh, AAA x 2 from:
GPI International Ltd.
Address: 7F, Building 16W, 16 Science Park West
Avenue, Hong Kong Science Park, Hong Kong.
• 55AAAHC; OR
Shenzhen Highpower Technology Co., Ltd.
Address: Building 1, No.68, Xingxia Road, Pinghu
Town, Longgang District, Shenzhen, Guangdong,
China
• HFR-AAA550
Parent unit
• enters monitor mode when sound level is
higher than 60dBAspl.
• enters standby mode when sound level is
lower than 60dBAspl.
Note
Specifications are subject to change without prior notice.
18
Technical Specifications
6. General information
Cleaning and care
Important
Always switch o and disconnect the power adaptor before cleaning your
Digital Audio Baby Monitor.
• Clean your digital audio baby monitor with a slightly damp cloth or with an
anti-static cloth. Never use cleaning agents or abrasive solvents.
• Do not clean any part of the digital audio baby monitor with thinners or
other solvents and chemicals - this may cause permanent damage to the
product which is not covered by the warranty.
• Keep your digital audio baby monitor away from hot, humid areas or strong
sunlight, and do not let it get wet.
• Every eort has been made to ensure high standards of reliability of your
digital audio baby monitor. However, if something does go wrong, please
do not try to repair it yourself - contact Customer Service for assistance.
Disposal of the Device (environment)
At the end of the product life cycle, you should not dispose of
this product with normal household waste. Take this product to
a collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user guide and/or box
indicates this. Some of the product materials can be re-used
if you take them to a recycling point. By reusing some parts
or raw materials from used products you make an important
contribution to the protection of the environment. Please
contact your local authorities in case you need more information
on the collection points in your area. Dispose of the battery pack
in an environmentally-friendly manner according to your local
regulations.
Consumer Products and Accessories Warranty
Thank you for purchasing this Motorola branded product manufactured under
license by Meizhou Guo Wei Electronics Co. LTD., AD1 section, The economy
exploitation area, Meizhou, Guangdong, P.R.China . (“MZGW”)
What Does this Warranty Cover?
Subject to the exclusions contained below, MZGW warrants that this Motorola
branded product (“Product”) or certified accessory (“Accessory”) sold for use
with this product that it manufactured to be free from defects in materials and
workmanship under normal consumer usage for the period outlined below.
This Limited Warranty is your exclusive warranty and is not transferable.
Who is covered?
This warranty extends only to the first consumer purchaser, and is not
transferable.
General information
19
What will MZGW do?
MZGW or its authorized distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or
Accessories that do not conform to this limited warranty. We may use
functionally equivalent reconditioned / refurbished / pre-owned or new
Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA
OR MZGW BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY
OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.
Products Covered Length of Coverage
Consumer Products Two (2) years from the date of the
Consumer Accessories Ninety (90) days from the date of
Consumer Products and Accessories
that are Repaired or Replaced
products original purchase by the first
consumer purchaser of the product.
the accessories original purchase by
the first consumer purchaser of the
product.
The balance of the original warranty
or for ninety (90) days from the date
returned to the consumer, whichever
is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts
due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their
rated capacity and batteries that leak are covered by this limited warranty.
20
General information
Abuse & Misuse. Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as physical damage
(cracks, scratches, etc.) to the surface of the product resulting from misuse; (b)
contact with liquid, water, rain, extreme humidity or heavy perspiration, sand,
dirt or the like, extreme heat, or food; (c) use of the Products or Accessories
for commercial purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of Motorola or
MZGW are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage
that result from the use of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting
from service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than Motorola, MZGW or its
authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date
tags that have been removed, altered or obliterated; (b) broken seals or that
show evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts, are excluded from
coverage.
Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to
or use with the Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please visit us at:
motorolanursery.com/support
You will receive instructions on how to ship the Products or Accessories at
your expense and risk, to a MZGW Authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the
original proof of purchase (receipt) which includes the date, place and seller
of the Product; (c) if a warranty card was included in your box, a completed
warranty card showing the serial number of the Product; (d) a written
description of the problem; and, most Importantly; (e) your address and
telephone number.
These terms and conditions constitute the complete warranty agreement
between you and MZGW regarding the Products or Accessories purchased
by you, and supersede any prior agreement or representations, including
representations made in any literature publications or promotional materials
issued by MZGW or representations made by any agent, employee or sta of
MZGW, that may have been made in connection with the said purchase.
EU Declaration of Conformity (DoC)
Hereby, MZGW declares that the radio equipment type is in compliance with
RE Directive 2014/53/EU. The full text of the EU declaration of conformity is
available on the website: motorolanursery.com
General information
21
FCC and IC regulations
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Important note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ISEDC Warning
This device complies with Innovation, Science, and Economic Development
Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d' Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes :
1. l'appareil nedoit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
22
General information
Radiation Exposure Statement:
The baby unit complies with FCC/ISEDC radiation exposure limits set forth for
an uncontrolled environment. The baby unit should be installed and operated
with minimum distance 20cm between the radiator& your body. For face up
operation, please hold the device 10mm from your face.
The parent unit has been tested and comply with FCC and ISEDC SAR limits.
Déclaration d'exposition aux radiations:
L'unité bébé est conforme aux limites d'exposition aux rayonnements FCC /
ISEDC établies pour un environnement non contrôlé. L'unité bébé doit être
installée et utilisée avec une distance minimale de 20 cm entre le radiateur et
votre corps. Pour un fonctionnement face vers le haut, tenez l'appareil à 10 mm
de votre visage.
L'unité parent a été testée et est conforme aux limites SAR FCC et ISEDC.
General information
23
Manufactured, distributed or sold by Meizhou
Guo Wei Electronics Co. LTD., ocial
licensee for this product. MOTOROLA and
the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark
Holdings, LLC. and are used under license. All
other trademarks are the property of their
respective owners. © 2022 Motorola Mobility
LLC. All rights reserved.
Version 5 (EN_EU&NA)
Loading...