Motorola PC850 user Manual

Page 1
®
c
1
And Making VoIP Calls
www.hellomoto.
6809495A86-A
or call the Motorola Help desk at:
The following steps describe how to install the software on a computer running the Microsoft Windows® XP operating system. Minor differences exist when installing this software on other Windows operating systems.
-877-MOTOBLU (1-877-668-6258)
Page 2
1
Stop all running programs and insert the installation CD into the CD-ROM drive. The installation starts automatically and guides you through the installation. If the installation does not start automatically, find the SETUP.exe file on the CD and double click it to start the installation.
2
Welcome to Bluetooth® software.
3
Accept license agreement.
4
Confirm or change software destination location.
Page 3
5
Start installation.
6
Installation begins.
7
Bluetooth device not found message displays. Do NOT respond until you install the adapter.
8
Insert adapter into USB port. Click OK in Bluetooth device message (see step 7) if installation does not continue.
Page 4
9
Complete the installation and restart your computer.
10
Verify Bluetooth adapter is ready to receive and transmit data (LED is solid blue).
11
Right click and select Start Using Bluetooth.
Start Using Bluetooth
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.
The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. Microsoft, Windows, ActiveSync, Windows Media, and MSN are registered trademarks of Microsoft Corporation; and Windows XP, Windows Mobile and Microsoft.net are trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners.
www.hellomoto.com
Page 5
12
Complete the initial Bluetooth configuration wizard.
13
Enter computer information and click Next. On the Initial Bluetooth Configuration wizard window, click Next.
14
Select and configure services.
15
To configure another device, click Next. Otherwise, click Skip.
Click Finish.
Continue steps on other side
>
Page 6
16
Pairing with your
17
Make sure your Bluetooth device is powered on and can be found.
Bluetooth Device
Open Bluetooth Explorer by double clicking My Bluetooth Places on your computer desktop.
For the H500 Headset: To prepare the H500 headset to be found, make sure it is powered off. Then press and hold the Call (center) button until the blue light remains solidly lit .
Press and Hold until light remains solidly lit.
For other Bluetooth devices: Refer to
the devices User Guide for detailed information about making the device discoverable (putting it in Pairing Mode).
18
On your computer, search for Bluetooth devices. Make sure the device you want to communicate with is on and can be found. (i.e. H500 headset).
19
Right click the device and select Pair Device.
Motorola H500 Audio Headset
Page 7
20
For Motorola headsets: Enter the 4-digit PIN code 0000 and click OK.
21
A check mark displays next to the device icon indicating a successful pairing (bond). Bluetooth services are now ready to used.
For all other devices: Follow the prompts for the device. When prompted for a PIN code, enter the code specified in the device User Guide (for Motorola devices, this code is usually 0000 or 1234). The code must be the same on both paired (bonded) devices.
22
Using a Bluetooth Headset or audio device and computer, you can make Voice over IP (VoIP) calls. The following steps describe how to make VoIP calls.
Making VoIP Calls
23
Motorola H500
Right click the audio device icon and select Connect Headset.
H500
Double-click the Bluetooth audio device icon (that was paired with the computer in step
21).
Double-click the Bluetooth Audio Device Icon.
Motorola H500
Headset on Motorola H500 Not Connected
H500
Page 8
24
When the device is successfully connected, the icon turns green.
Motorola H500
Note: The headset will beep. Press the Call (center) button once to complete the connection.
H500
25
Launch the VoIP program and initiate a call. The VoIP call audio is routed to your Bluetooth headset.
Note: If no audio is heard through the Bluetooth headset then, manually set the audio settings of the VoIP program to be Bluetooth Audio.
To set Bluetooth Audio manually when using Skype: Go to the Tools menu, select
Options, and then Sound Devices.
Not all features of Bluetooth headset may be available during VoIP calls.
Note: Pressing the headset Call (center) button
disconnects the headset from the computer but may not end the call.
When reconnecting your Bluetooth
26
If the headset does not automatically connect: On the computer system tray, right
click the symbol and select Quick Connect and then Headset.
headset to the computer, turn the headset on. The headset will beep. Press the Call (center) button once to complete the connection.
Bluetooth Explorer
Quick Tips
To open Bluetooth Explorer, click My Bluetooth Places on your desktop, or
double click in the system tray.
Bluetooth Setup Wizard
Configures devices, connections, and local services.
Entire Bluetooth Neighborhood
Displays Bluetooth adapter devices.
Page 9
Find Bluetooth Devices
c
o
c
.
Looks for other Bluetooth devices.
For additional assistan
My Device
Displays services on this computer.
Bluetooth Exchange Folder
Contains files and folders available to remote Bluetooth adapter devices.
For more information on how to use this software, see the product Help files for each screen of the software.
www.hellomoto.
or call the Motor
1-877-MOTOBLU
For additional assistan
http://support
e visit our website at:
om/bluetooth
la Help desk at:
(1-877-668-6258)
ce using Skype visit:
skype.com
Page 10
MOTOROLA and the Stylized M Logo a
r
y W M
o
e
Trademark Office.
e registered in the US Patent &
The Bluetooth trademarks are owned b Motorola, Inc. under license. Microsoft, and MSN are registered trademarks of Windows XP, Windows Mobile and Micr Corporation. All other product or servic respective owners.
www.hellomoto.com
© 2005 Motorola Inc.
their proprietor and used by
indows, ActiveSync, Windows Media,
icrosoft Corporation; and
soft.net are trademarks of Microsoft
names are the property of their
Loading...