Motorola P6LR1 User Manual

Motorola Oasis™

Quick Start Guide

HX520

Congratulations

Your Motorola Oasis™ headset is designed for quick
connections, clear calls, and lasting comfort.

Some other cool features:

• Simultaneously connect with two phones.

• Voice prompts to guide you on connections, battery

level, and other functions.

We’ve crammed all of the main features of your
headset into this handy guide, and in a matter of
minutes we’ll show you just how easy your headset is
to use.

So go on, check it out.

more information

on the Web: www.motorola.com/support

Caution: Before using your headset for the first
time, please read the important Safety, Regulatory
& Legal information at the back of this guide (page

16).

1Congratulations

Yo u r h e a d s e t

Micro USB

Charging

Connector

Volume Up

Button

Mute

Button

Power Switch and

Status Light

Speaker

Call
Button

Microphones

Boom

Volume Down

Button

the important parts

2 Your headset

Charge it

let’s get you up and running

Status Light

Red/Yellow = charging
Green = fully charged

While your headset is charging, you won’t be able to
use it.

Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling
facility. Any attempt to remove or replace your battery
will damage your headset.

3Charge it

Basics

On

Off

a few essentials to get you started

Turn it on & off

Wear it

1 Rotate the boom to the

open position and the
speaker to the right or left
(depending on which you
ear you use).

2 Loop it over your ear

(ensure main housing is
behind your ear and the
boom points towards your
mouth).

Tip: Try out all the supplied ear cushions to get a
comfortable fit and optimal performance.

4 Basics

Store it

1

2

storing
position

Rotate the boom (1) and speaker (2) as shown to the
closed position.

Note: Only rotate the boom in the direction shown. It
will not rotate in the other direction.

5Basics

Pair & connect

connect and go

Note: The voice prompts are only in English.

Pair & connect with your phone

1 Turn off any Bluetooth® devices previously paired

with your headset.

2 Turn on the Bluetooth feature on your phone.

3 Put the headset on your ear (see “Wear it” on

page 4).

4 Turn on your headset (see “Turn it on & off” on

page 4).

The status light becomes steadily lit in blue and you
hear “ready to pair”.

5 Follow the voice prompts to connect your phone to

your headset.

Note: When prompted for the passkey, enter 0000.

When your headset successfully pairs with your
phone, you hear “pairing complete”.

For daily use, make sure your headset is turned on,
and your phone’s Bluetooth feature is on. Your headset
and phone will connect automatically.

6 Pair & connect

Pair & connect a second phone

1 Turn off first phone and any other Bluetooth devices

previously paired with your headset.

2 Turn your headset off (see “Turn it on & off” on

page 4).

3 Put the headset on your ear.

4 Turn on the Bluetooth feature on your phone.
5 Turn on your headset.

The status light becomes steadily lit in blue and you
hear “ready to pair”.

6 Follow the voice prompts to connect your phone to

your headset.
Note: When prompted for the passkey, enter 0000.

When your headset successfully pairs with your
phone, you hear “pairing complete”.

To connect to both phones, turn on the first phone
while the second phone is connected. When you hear
“phone 2 connected”, your headset is connected to
both phones.

Test your connection

1 Place the headset on your ear.
2 On your phone, dial a phone number and press the

Call/Send key.

If your phone and headset are successfully connected,
you hear ringing on the headset.

7Pair & connect

Calls

it’s good to talk

Note: Some features are phone/network dependent.

Note: The voice prompts are only in English.

To .. .

answer call Press the Call button.

reject call Press and hold a Volume button

make a voice
dial call

redial last call Press and hold the Call button until

mute or
unmute a call

end a call Press the Call button.

answer
second
incoming call

reject second
incoming call

8 Calls

until you hear a tone

Press the Call button and you hear
a tone.

you hear a tone.

Press the Mute button and you
hear “mute on” or “mute off”.

Press the Call button.

Press and hold a Volume button
until you hear a tone.