Motorola ULC
Bluetooth Headset
Quick Start Guide
DRAFT 1 - 06/18/2010
Dummy Page - To be discarded before printing
Use this template with A7MotoPortraitProduct1 StructApps. See the Reference Pages for template user instructions.
Your Motorola HK100 headset is designed for quick connections, clear calls, and lasting comfort.
We’ve crammed all of the main features of your headset into this handy guide, and in a matter of minutes we’ll show you just how easy your headset is to use.
& So go on, checkDRAFTit out.
more information
-
on the Web: www.motorola.com/support Caution:PROPRIETARYBefore using your headset for the first time, please readMOTOROLAthe important Safety, Regulatory & Legal information at the back of this guide
(page 11).
INFORMATION
CONFIDENTIAL
Congratulations 1
the important parts
Call |
|
|
|
Microphone |
Button |
|
|
|
(on side) |
|
|
|
||
|
|
|
|
|
Indicator |
& |
|
|
|
|
|
|
Light |
|
|
|
Earhook |
Mini USB |
Ear |
|
|
MOTOROLACharging |
Speaker |
Connector
INFORMATION
CONFIDENTIAL
2 Your headset
let’s get you up and running
Indicator Light
Red/Purple - charging
Blue - fully charged
& DRAFT
-
PROPRIETARY MOTOROLA
While your headset is charging, you won’t be able to
use it. |
INFORMATION |
|
Note: |
||
Your battery is designed to last the life of your |
||
|
CONFIDENTIAL |
|
product. It should only be removed by a recycling |
facility. Any attempt to remove or replace your battery will damage your headset.
Charge it |
3 |
Basics |
|
|
|
|
a few essentials to get you started |
||||
Turn it on & off |
|
|
||
Press and hold the Call |
Call Button |
|||
button until you hear |
||||
|
|
|||
|
|
|||
“power on” or “power |
|
|
||
off”. |
& |
|
|
|
DRAFT |
|
|
||
|
|
|
Flex the ear hook MOTOROLAand loop it over your ear as shown.
Make sure the speaker aligns with your ear canal, and the microphone
INFORMATION |
|
is pointing towards your mouth. |
|
ready for use on your |
CONFIDENTIAL |
Your headset comes |
|
right ear. To change for left ear, just pull off the earhook, turn, and reinstall.
4 Basics
connect and go
1Turn off any Bluetooth devices previously paired with your headset.
2Turn on the Bluetooth feature on your phone.
3Turn on your headset (see “Turn it on & off” on
page 4). &
The status lightDRAFTbecomes steadily lit in blue.
Note: When prompted for the passkey, enter 0000.
-
When connected,PROPRIETARYyou see the status light rapidly flash in blue and purple.
For daily use, makeMOTOROLAsure your headset is turned on, and your phone’s Bluetooth feature is on. Your headset
and phone will connect automatically.
1Place the headset on your ear.
2On the phone, dialINFORMATIONthe number you want to call and press the Call/Send key.CONFIDENTIALIf connected,
you hear ringing on the headset.
Pair & connect |
5 |
Caution: This action erases all pairing information stored in your headset.
1Turn your headset off.
2Press and hold the Call button and wait for a tone after hearing “power on”.
& DRAFT
-
PROPRIETARY MOTOROLA
INFORMATION
CONFIDENTIAL
6 Pair & connect
it’s good to talk
Note: Some call features are phone/network dependent.
To...
answer call |
& Press the Call button. |
||
reject call |
|
DRAFT |
|
|
Press and hold the Volume button |
||
|
|
|
until you hear a tone. |
|
|
|
- |
|
PROPRIETARY |
||
make a voice |
Press the Call button and you hear |
||
dial call |
|
|
a tone. |
|
|
|
|
end a call |
|
MOTOROLA |
|
|
Press the Call button. |
||
answer or |
|
Follow the phone’s instructions. |
|
reject second |
|||
call |
|
|
|
|
|
|
|
volume |
|
|
INFORMATIONadjust volume. |
adjust call |
|
Use volume buttons on phone to |
|
|
|
|
CONFIDENTIAL |
Calls 7