Motorola P6LO2, P6LO1 User Manual

Congratulations

Your MOTOROLA ROADSTER™ Bluetooth® Car Kit allows you to make and receive calls and play music from your phone while safely keeping your hands on the steering wheel.

With the ROADSTER, you can:

• Simultaneously connect with two phones.

• Hear caller’s name or number, and use your voice to

answer or ignore calls.

• Switch between your FM radio and car kit speaker.

• Hear voice prompts to guide you on connections,

battery level, and other functions.

We’ve crammed all of the main features of your car kit into this handy guide, and in a matter of minutes we’ll show you just how easy your car kit is to use.

So go on, check it out.

More information

On the web: www.motorola.com/support

Caution: Before using your car kit for the first time, please read the important Safety, Regulatory &

Legal information at the back of this guide.

1Congratulations

Your car kit

the important parts

Mute Button

Status

Light

Charge

Light

Music Button

Volume / FM Tune Down Button

2 Your car kit

Call Button

Volume / FM Tune Up Button

Voice Dial Button

Speaker

Power Switch

Micro USB Charging Connector

FM / Speaker Button

Charge it

let’s get you up and running

Charge Light

Red = charging Green = fully charged

You can use your car kit while unplugged or plugged into the charger.

Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your car kit.

3Charge it

Basics

Slide onto car visor

OnOff

a few essentials to get your started

Install it

Turn it on & off

The car kit automatically turns off when your phone is moved away from the car for more than 1 minute.

When you return (open the car door), the car kit turns back on and reconnects to your phone.

Note: Moving the car kit or the power switch off and on also turns it on.

4 Basics

Listen to music

Note: This feature is phone dependent.

Your car kit allows you to stream Bluetooth music from your phone.

Press to play/pause music from your phone on your car kit speaker or car radio.

To stop music, press and hold until you hear a tone.

While a call is active, music pauses. When the call ends, music resumes playing.

Note: The volume setting on your phone may impact volume on your car kit.

Some call features

Voice commands

Answer or ignore calls using your voice—just say “answer” or “ignore”.

Note: This feature does not work for second incoming calls.

Hear caller’s name

If your phone knows your caller’s name, then you hear “call from <name>” on an incoming call.

Note: If the caller is not in your phone’s contact list (or your phone does not support this feature), then you hear the incoming call’s number.

5Basics

Pair & connect

connect and go

Pair & connect with your phone

1 Turn off any Bluetooth devices previously paired

with your car kit.

2 Turn on the Bluetooth feature on your phone.

3 Turn on your car kit (see “Turn it on & off” on

page 4).

The status light becomes steadily lit in blue and you hear “ready to pair”.

4 Follow the voice prompts to connect your phone to

your car kit.

Note: When prompted for the passkey, enter 0000.

When your car kit successfully pairs with your phone, you hear “pairing complete”.

Note: After pairing, you may be asked by your phone to grant phonebook access to your car kit. If prompted, say "always accept".

For daily use, make sure your car kit is turned on, and your phone’s Bluetooth feature is on. Your car kit and phone will connect automatically.

6 Pair & connect

Pair & connect a second phone

1 Turn off the first phone and any other Bluetooth

devices previously paired with your car kit.

2 Turn your car kit off.

3 Turn on the Bluetooth feature on your phone.

4 Turn on your car kit.

The status light becomes steadily lit in blue and you hear “ready to pair”.

5 Follow the voice prompts to connect your phone to

your car kit.

Note: When prompted for the passkey, enter 0000.

When your car kit successfully pairs with your phone, you hear “pairing complete”.

Note: After pairing, you may be asked by your phone to grant phonebook access to your car kit. If prompted, say "always accept".

To connect both phone(s) and/or music device, turn these on and then turn your car kit off and on. When you hear “<phone 1 name> connected”, and “<phone 2 name> connected”, your car kit is ready to go. The last paired phone is your primary phone for calling features.

7Pair & connect

Test your connection

1 Ensure your car kit is turned on.

2 On your phone, dial a phone number and press the

Call/Send key.

If successfully connected for calls, you hear ringing on the car kit speaker or car radio.

8 Pair & connect

Audio mode

FM/Speaker Button

choose where to listen

Listen to calls and music from your phone on your car radio (FM mode) or car kit (speaker mode).

Press to switch between modes.

Note: Audio broadcast to your FM radio may be heard by other radios (call audio on your internal speaker is not affect ed ).

Set FM mode frequency

Use and to select the FM radio frequency to listen to your calls and music.

• Press and hold button to scan for next open

frequency.

• Tap button to increase or decrease current