Motorola P6KN1 User Manual
your headset
Earhook
Charging
Port
Volume
Buttons
Call
Button
Power
Switch
Ear
Speaker
Indicator
Light
Microphone
your headset
Take a moment to familiarize yourself with your new
H525 Headset.
2
charge it
charge i t
You’ll need to charge your headset before using it. Plug
the charger into the charging port on your headset and a
wall outlet.
The indicator light is red or purple while the battery is
charging. When the battery is fully charged, the indicator
light turns blue.
Note:
Headset is not functional while charging.
Note:
Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headphones.
3
pair & connect
pair & connect
initial pair & connect
Once charged, get your headset paired and connected to
your Bluetooth phone.
1
Turn off any Bluetooth devices previously paired
(linked) with your headset.
2
Turn on the Bluetooth feature on your phone.
3
Turn on your headset by sliding Power switch to on
position (orange not showing).
The indicator light becomes steadily lit in blue to
indicate headset is in discoverable mode.
4
Set your phone to search for Bluetooth devices.
5
Select
Motorola H525
your phone.
6
Select Ok or
phone.
7
If prompted, enter
The indicator light rapidly flashes blue and purple to
indicate successful pairing and connecting with your
phone.
4
Ye s
from the search results on
to pair your headset with your
0000
for the passkey.
pair & connect
reconnect
After initially pairing and connecting your phone and
headset, you don’t need to do it again.
For daily use, make sure your headset is turned on, and
your phone’s Bluetooth feature is on. Your headset and
phone will connect automatically!
test your connection
To test connection to your phone:
1
Place the headset over your ear.
2
On the phone, dial the number you want to call and
press
Call/Send
If your phone and headset are successfully connected,
you hear ringing on the headset.
key.
5
turn on & off
Charging
Port
Power
Switch
Indicator
Light
Microphone
turn on & off
turn on
Slide the switch toward the microphone (orange not
showing). The indicator light flashes blue three times,
then flashes in blue and purple (if connected with a
device) or is steadily blue (if ready to be paired).
turn off
Slide the switch toward the charging plug (orange
showing). The indicator light flashes three times then
tur ns off.
6
put it on
2
1
From Right Ear To Left Ear
put it on
choose an ear
The headset comes ready for the right ear. To change the
headset for the left ear:
7
put it on
Indicator
Light
Volume
Buttons
change volume button orientation
1
Turn the headset power off.
2
Press and hold the Volume button you want to
assign as the "volume up" button and slide the Power
switch on. The indicator light flashes blue three
times. When connected, it will flash blue/purple.
8
put it on
wear it
Flex the earhook and loop it over your ear as shown.
9
battery check
battery check
Press and hold both Volume buttons while not on a call.
indicator light available talk time
red less than 1.5 hours
purple between 1.5 to 3.5 hours
blue up to 5 hours
To save battery power, turn off the headset when you
don't use it for an extended time by sliding the Power
switch towards the charging port.
10
Loading...