Loading...
your headset 
Take a moment to familiarize yourself with your new H525 Headset.
Earhook |
|
|
Ear |
Charging |
Speaker |
|
|
Port |
Indicator |
|
|
|
Light |
Volume |
|
Buttons |
|
Call |
Microphone |
|
|
Button |
Power |
|
Switch |
2
charge it
You’ll need to charge your headset before using it. Plug the charger into the charging port on your headset and a wall outlet. 
The indicator light is red or purple while the battery is charging. When the battery is fully charged, the indicator light turns blue.
Note: Headset is not functional while charging.
Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headphones.
3
pair & connect 
initial pair & connect
Once charged, get your headset paired and connected to your Bluetooth phone.
1Turn off any Bluetooth devices previously paired (linked) with your headset.
2 Turn on the Bluetooth feature on your phone.
3Turn on your headset by sliding Power switch to on position (orange not showing).
The indicator light becomes steadily lit in blue to indicate headset is in discoverable mode.
4 Set your phone to search for Bluetooth devices.
5Select Motorola H525 from the search results on your phone.
6Select Ok or Yes to pair your headset with your phone.
7 If prompted, enter 0000 for the passkey.
The indicator light rapidly flashes blue and purple to indicate successful pairing and connecting with your phone.
4
pair & connect 
reconnect
After initially pairing and connecting your phone and headset, you don’t need to do it again.
For daily use, make sure your headset is turned on, and your phone’s Bluetooth feature is on. Your headset and phone will connect automatically!
test your connection
To test connection to your phone:
1 Place the headset over your ear.
2On the phone, dial the number you want to call and press Call/Send key.
If your phone and headset are successfully connected, you hear ringing on the headset.
5
turn on & off 
turn on
Slide the switch toward the microphone (orange not showing). The indicator light flashes blue three times, then flashes in blue and purple (if connected with a device) or is steadily blue (if ready to be paired).
Indicator
Light
Microphone
Charging
Port
Power
Switch
turn off
Slide the switch toward the charging plug (orange showing). The indicator light flashes three times then turns off.
6
put it on
choose an ear
The headset comes ready for the right ear. To change the headset for the left ear:
1 |
2 |
From Right Ear |
To Left Ear |
7
put it on
change volume button orientation 
1 Turn the headset power off.
2Press and hold the Volume button you want to assign as the "volume up" button and slide the Power switch on. The indicator light flashes blue three times. When connected, it will flash blue/purple.
Volume
Buttons
Indicator 
Light
8
put it on
wear it
Flex the earhook and loop it over your ear as shown.
9
battery check
Press and hold both Volume buttons while not on a call.
indicator light |
available talk time |
|
|
red |
less than 1.5 hours |
|
|
purple |
between 1.5 to 3.5 hours |
|
|
blue |
up to 5 hours |
|
|
To save battery power, turn off the headset when you don't use it for an extended time by sliding the Power switch towards the charging port.
10
Loading...