MOTOROKR S7-HD
Bluetooth
Headphones Quick
Start Guide
DRAFT 4 - 8/15/08
Temp Page - To be discarded before printing
use this template with A7MotoQSG StructApps
MOTOROKR
Quick Start Guide
S7-HD
welcome
The MOTO
a high-definition listening experience in a sleek design.
Perfect for streaming music from your MP3 player,
computer, or music phone.
Note:
be sure to review the important safety and legal
pamphlet and follow instructions. Periodically review this
information so you remember how to safely use your
headphones.
2
ROKR
™ S7-HD Wireless Headphones deliver
• Goodbye wires
control of your music and calls from the rotating
controls on the S7-HD headphones.
• Chill out in comfort
on-ear wearing style makes it your ideal partner
for total music immersion.
• Music to your ears
enhanced acoustic design for a high-definition
wireless listening experience.
• Stay connected
with clear conversations in stereo.
Before using your headphones for the first time,
—Move freely with wireless
—The S7-HD’s comfortable
—High-quality speakers and
—Communicate hands-free,
before you begin
before you begin
Take a moment to familiarize yourself with the
components of your headphones.
Play/Pause Button
Music
Control
Wheel
Volume Control Wheel
Power
Switch
Call Button
Indicator
Light
Charging
Port
Microphone
3
charge it
charge i t
You’ll need to charge your headphone’s battery for a
minimum of 2 hours using the Motorola charger.
1
Plug the charger into the charging port on your
headphones.
The Charging indicator light turns red when the
battery is charging. When the battery is fully
charged, the indicator light turns green.
2
Disconnect the charger.
Note:
This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, expected life
of the rechargeable battery is approximately 500 charges.
Note:
Your battery is designed to last the life of the
product. It should only be removed by a recycling facility.
ANY ATTEMPT TO REMOVE OR REPLACE YOUR
BATTERY WILL DAMAGE THE PRODUCT.
4
turn it on & off
turn it on & off
To turn your headphones on and off
switch to the ON position. The main indicator light
flashes blue 3 times when turned on (or purple when
turned off).
Note:
Your headphones will not turn on while charging.
5
, slide the Power
connect wirelessly
connect wirelessly
To listen to your music via Bluetooth® wireless
connection
calls, you need to pair (link) your headphones with your
Bluetooth phone and/or music player.
1
2
3
4
5
6
7
6
, as well as make and receive handsfree
Turn off any Bluetooth devices previously paired with
your headphones.
Turn on the Bluetooth feature on your Bluetooth
phone or music player.
Turn on your headphones.
The main indicator light is steadily lit in blue to
indicate the headphones are in discoverable mode.
Place phone or music player in Bluetooth search
mode.
The phone or music player searches for your
headphones.
Select
Motorola S7-HD
your phone or music player.
Select OK or
phone or music player.
If prompted, enter
Ye s
from the search results on
to pair your headphones with your
0000
for passkey.
connect wirelessly
When your headphones successfully pair and connect
with your phone or music player, the main indicator light
flashes blue and purple. Music playing from your
connected music source is heard on your headphones.
Notes:
•
After successfully pairing your headphones and
Bluetooth device, you don't need to repeat these
steps. For each use, make sure that your
headphones are turned ON, and your device's
Bluetooth feature is ON.
•
Some music devices will automatically attempt
to play music when the S7-HD re-connects to it.
7
control your tunes
control your tunes
Playback controls on your headphones can be used when
listening to wireless music streaming from a
Bluetooth-enabled music player that also provides
remote control capabilities (AVRCP).
Press
—play/pause music
Press and hold
—stop music
Rotate forward and release
Rotate backward and release
Rotate forward and hold
Rotate backward and hold
When remote control capabilities are not supported by
your music player, the S7-HD simply acts as headphones,
and music should be controlled from your music player.
With some music players, previous track must be rotated
twice to go back to the previous song. Refer to your
music player's manual for specific music control features.
8
—skip to next track
—skip to previous track
—fast-forward track
—rewind track
crank it up
crank it up
To adjust music volume
on your headphones.
, use the Volume Control Wheel
Rotate forward and release
Rotate backward and release
Rotate forward and hold
Rotate backward and hold
You’ll hear a tone when maximum or minimum volume is
reached on your headphones.
Note:
The volume setting on your music player may
impact volume on your headphones.
—increase volume (step)
—decrease volume (step)
—increase volume (continuous)
—decrease volume (continuous)
9
handsfree calls
handsfree calls
To make and receive calls using the headphones, a
Bluetooth handsfree (HFP) connection must be
established with your phone (see “connect wirelessly”
on page 6 for details).
You’ll use these controls and indicators on your
headphones when making and receiving handsfree calls.
Play/Pause Button
Music
Control
Wheel
10
Volume Control Wheel
Call Button
Indicator
Light
receive a call
receive a call
When there’s an incoming call, the main indicator light
flashes quickly in blue on your headphones, and you hear
a
ring tone over your headphones. If music is playing
when a call is received, the music pauses or mutes,
depending on your music player and connection setup.
Press
—answer call
Rotate forward or backward and hold
—reject call
11
while on a call
while on a call
When a call is active, the main indicator light slowly
pulses in blue on your headphones.
Press
—mute/unmute call
(indicator light pulses
in purple while muted)
Press
—end call
Rotate forward and release
Rotate backward and release
Rotate forward and hold
Rotate backward and hold
12
—increase call volume (step)
—decrease call volume (step)
—increase call volume (continuous)
—decrease call volume (continuous)
while on a call
*
When there’s a second incoming call, the main indicator
light flashes quickly in blue on your headphones and you
hear an alert.
Press
—1) answer second call (first call is placed on hold),
2) end second call (first call resumes), or
3) resume first call on hold (when second caller hangs up)
Rotate forward or backward and hold
* If your phone supports this feature
On most phones, if you end the second call using your
phone or headphones, the call on hold instantly resumes.
If the remote side of the second call ends the call, the
original call remains on hold until you resume the call,
either by pressing and releasing the Call button on your
headphones or by using the phone to resume the call.
—reject second incoming call
13
make a call
make a call
Using the headphones to make a call, you can redial the
last dialed number or make a voice dial call (if your phone
supports this feature). When making a voice dial call, the
microphone on the headphones is enabled, and you hear
a prompt from your phone.
Press
—make a voice dial call (you hear a
prompt from your phone)
Press and hold
—redial last number
14
wear your headphones
wear your headphones
To wear your headphones, first pull open ear clip, then
slide the bottom of the ear clip above the top of your ear
and rotate it around your ear until it fits comfortably, and
finally rotate headphones gently towards your ear. Adjust
the back of the customizable ear clip to fit the shape of
your ear..
15
check your battery
check your battery
To check your headphone’s battery charge level
rotate and hold Volume Control Wheel in either direction
and press the Call button. The indicator light displays
charge status until the Volume wheel is released.
Main Indicator Light Battery Charge Status
Red Less than 30% charge
Yellow Between 30% and 70%
charge
Green More than 70% charge
When your headphones are in a low battery charge state,
the main indicator light flashes quickly in red, and a tone
is repeated every minute.
16
,
headphones status
headphones status
The main indicator light on your speaker displays current
status of Bluetooth wireless connection(s) to your phone
and/or music player.
Main Indicator Light Wireless Status
steady blue pairing mode
long blue flash standby (handsfree
connection only)
long yellow flash standby (streaming music
long green flash standby (both handsfree and
quick blue flash incoming/outgoing call
long blue pulse connected on a call
long purple pulse connected call muted
three green flashes started/paused music player
long green pulse music streaming (with
connection only)
streaming music connection)
handsfree connection active)
17
headphones status
Main Indicator Light Wireless Status
long yellow pulse music streaming (without
two yellow flashes SRS WOW HD on/off
three yellow flashes stopped music player
slow red flash idle (not connected to a
18
handsfree connection active)
device)
tips & tricks
tips & tricks
multi-point (two device) connection
To connect to a phone and music device at the same
time:
1
Pair and connect to your phone first (see page 6).
2
Turn off your phone and your headphones.
3
Turn your headphones back on.
The Bluetooth indicator flashes to indicate the
headphones are in discoverable mode.
4
Turn on your music device. Make sure the Bluetooth
feature is turned on in the device.
The music device searches for your headphones.
5
Complete steps 5 through 7 on page 6 to pair and
connect your music device and headphones.
6
Turn off your headphones.
7
Turn your phone back on, and make sure the
Bluetooth feature is turned on in both the phone and
music device.
8
Turn your headphones back on. It should now
connect to both devices.
19
tips & tricks
pairing tips
• To initiate pairing (discoverable) mode
manually
powered on, press and hold both Call and Play/
Pause buttons at the same time.
• To clear the paired devices list in your
headphones
while sliding Power switch on. This also
SRS WOW HD on
default level
20
when your headphones are already
, press and hold Play/Pause button
and
.
reinitializes volume to
turns
audio enhancements
audio enhancements
enhance audio with SRS WOW HD
SRS WOW HD is an audio enhancement technology that
provides better width and improved bass and definition
control. This feature is enabled on your headphones at
purchase.
If your music player also has SRS or any other sound
enhancement technology, best audio results may be
achieved if the audio enhancement feature is enabled on
only either the music source or the headphones (but not
both).
Note:
It is recommended to turn off the equalizer feature
on your music player.
To disable the SRS WOW HD audio enhancement
feature on your headphones
Pause and rotate to Rewind at the same time until you
hear a tone and the main indicator light flashes yellow
twice. To re-enable the SRS feature, perform the same
action.
, press and hold the Play/
21
tech speak
tech speak
Here are some helpful Bluetooth terms to know:
Profile
A2DP
(Advanced
Audio
Distribution
Profile)
AV RC P
(Audio
Video
Remote
Control
Profile)
HFP
(Hands-Free
Profile)
22
An application (or use case) through
which different Bluetooth devices can
communicate with each other. Both
devices must support the same profile
in order to communicate with one
another for the application.
Profile for streaming dual-channel
stereo audio from a stereo music
player to your headphones.
Profile for controlling streaming audio/
video playback on remote devices.
Typically used with A2DP devices for
next/previous track selection and
pause/play functions.
Profile for making and receiving calls
from a hands-free device.
European Union Directives
Conformance Statement
Hereby, Motorola declares that this
product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Product
Approval
Number
23
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.motorola.com
www.motorola.com/bluetoothsupport
1-877-MOTOBLU (Motorola Bluetooth Support)
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for hearing impaired)
1-800-461-4575 (Canada)
The use of wireless devices and their accessories may be prohibited
or restricted in certain areas. Always obey the laws and regulations
on the use of these products.
MOTOROLA and the Stylized M Logo are registered in the US Patent &
Trademark Office. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. SRS and WOW
HD are trademarks of SRS Labs, Inc. All other product and service
names are the property of their respective owners.
© 2008 Motorola, Inc. All rights reserved.
Bluetooth QD ID: Bxxxxxx
Manual Number: 68000201611-A
24
www.motorola.com
Loading...