Motorola P6JT1 Users manual

motorola

DRAFT

H780

Quick Start Guide

BEFORE YOU

BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

Take a moment before you get started to familiarize yourself with your new H780 Headset.

Call

Volume Buttons

Speaker (on reverse side)

Button

Multi-Color Indicator Light

Boom

Microphone (on reverse side)

Charge your headset's battery for 2 hours:

Plug the Motorola charger into the end of

the headset.

The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns green.

Disconnect the charger.

Note: Headset is not functional while charging.

Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life of the rechargeable battery is approximately 400 charges.

CHARGE

Your Headset's Battery

START BLUETOOTH

FEATURE

Your Phone

Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.

For most Motorola phones (from home screen):

Press (

Bluetooth Link > Setup.

Scroll to Power.

Select Change.

Scroll to On.

Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

Menu) > Settings > Connection >

Your Headset and Phone

Before you can use your headset, you must pair (link) it with your phone.

Step A - ENSURE HEADSET IS IN PAIRING MODE

Power on the headset by sliding Power switch to the On position (towards Power symbol on headset). The indicator light first flashes during power up, then initiates easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.

Indicator Light (steadily blue for pairing mode)

PAIR

Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET

For most Motorola phones:

On your Motorola phone, press (

Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.

The phone lists Bluetooth devices it finds.

Select Motorola H780.

Select OK or Yes to pair your headset with

your phone. Enter the passkey: 0000

Select OK.

When your headset successfully pairs with your phone, the indicator light flashes purple and blue.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

Menu) >

TROUBLESHOOTING

My headset will not enter pairing mode.

Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then using the Power switch, turn the headset off and on. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode.

My phone doesn't find my headset.

Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).

My headset worked before but now it's not working.

Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).

My headset will not pair with my phone.

Turn the headset on by using the Power switch. Press the Call button and both Volume buttons for 5 seconds. The indicator light turns solid blue. The headset is now in pairing mode (see step 3B) to complete the pairing process.

Support.

If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport

Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196

www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired)

Guide Number: 6809521A5-A

Bluetooth QD ID: Bxxxxxx

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.

Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:

Place the headset over your ear.

On the phone, dial the number you want to

call and press SEND key on your phone.

If your phone and headset are successfully

paired, you will hear ringing on the headset.

After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.

TEST AND USE

USING A SECOND PHONE?

Multipoint technology allows you to make and receive calls from two Bluetooth enabled devices like your personal and business phones.

To pair a second phone to your headset, follow these steps:

Turn off any phones or devices that are

already paired with your headset. Turn off your headset by closing the headset

boom. Perform Step 2 (“Start Bluetooth Feature”),

and Step 3 (”Pair”), and Step 4 (”Test and Use”) to pair your headset with your second phone.

To reconnect your headset with your first phone (and thus be connected to both phones), follow these steps:

Turn on first phone.

Use your first phone to connect to your

headset.

On your Motorola phone, press (

> Settings > Connection > Bluetooth Link > Audio Devices.

The phone lists Bluetooth devices it finds.

Select Motorola H780.

Select OK or Yes.

Your headset is now connected to both phones. The last paired phone (your second phone) is now your primary phone for voice dial functionality.

After you have successfully paired both phones with your headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.

Menu)

TIPS FOR USING H780

WITH TWO PHONES

Use the following tips when using H780's multipoint technology:

●

Incoming calls can be answered from both phones:

– When answering a call, the idle phone is disconnected from the headset.

– When the call ends, the idle phone is automatically reconnected to the headset.

●

Last number redial dials the last outgoing call made from either phone.

●

Voice dial is accessible from either phone via different key actions:

– For your primary device (last paired phone), tap the Call button until you hear the tone.

– For your secondary device (other paired phone), tap the Call button and either Volume button until you hear the tone.

USING YOUR H780

See

Features and

Functions Guide

on the reverse side

for information on

using your H780

Features and

DRAFT

Functions Guide

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side

of this guide

to complete initial setup

of your H780.

TURNING H780

ON AND OFF

To turn ON your H780, slide the Power

switch towards the power symbol, as shown below. The indicator light first flashes blue for several seconds, then:

●

flashes blue (if paired and connected with another device).

●

becomes steadily blue (if ready to be paired).

To turn OFF your H780, slide the Power switch off. The indicator light will turn off.

Indicator Light

Power

Switch

EAR CUSHIONS AND YOUR HEADSET

Your H780 headset is supplied with multiple ear cushions. Your headset’s performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied ear cushions with your headset.

The ear cushion is fitted onto the end of your headset’s earpiece speaker like shown, and placed onto your ear when using your headset.

When fitting an oval-shaped ear cushion on your headset, be sure the cushion is oriented, as shown below (pointing towards the microphone).

WEARING THE

HEADSET

To wear your headset, flex the earhook and loop it over your ear as shown.

Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort.

CHANGING FOR USE

ON OTHER EAR

You can wear your H780 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:

Gently lift and pull the

top of the earhook up and off speaker stem, as shown.

Flip the headset over.

Attach the earhook to

the speaker stem, as shown.

QUICK BATTERY

CHECK

While turned on and not on a call, you can check your headset’s battery charge level by pressing and holding both Volume buttons.

Note: This feature does not work when headset is in pairing mode.

The indicator light displays charge status until you release the buttons.

Headset Indicator Available Talk Time

Red Less than 2 hours Yellow 2 to 4 hours Green Up to 6 hours

European Union Directives

Conformance Statement

Hereby, Motorola declares that this product is in compliance with:

• The essential requirements and other relevant provisions of Directive 1999/5/EC.

• All other relevant EU Directives.

Product

The above gives an example of a typical Product Approval Number.

You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.

Product

Approval

Number

USING FAVORITE NUMBER

BUTTON

To program the Favorite Number button with the current call number, press and hold

the Favorite Number button while in the call until [xxx] tones are heard.

To place a call using the Favorite Number button, press and hold the Favorite Number

button until you hear a tone.

MAKING CALLS

Function Action

Make a voice dial call Tap the Call button (Primary phone) and speak the name after the tone

Make a voice dial call Tap the Call button (Secondary phone) and either Voume button and speak the name after the tone

End a call Tap the Call button, and hear a high-to-low tone

Answer a call Open the boom or tap the call button (if boom is ready open), hear the ring tone, then a low-to-high tone

Reject a call Press and hold either Volume button until you hear a tone

Note: Some features are phone/network dependent.

MAKING CALLS

Function Action

Redial last call Press and hold the Call button until you hear a tone

Answer a second Press and hold the incoming call Call button (places first call on hold), and hear a tone

Reject second incoming Press and hold either call Volume button until you hear a tone

Transfer a call from the Slide the power headset to the phone button to the OFF position

Mute or unmute a call Tap both Volume buttons until you hear a mute tone

Note: Your H780 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.

CONTINUED

AUDIO TONES

Audio Tone Headset Status

Ring tone Incoming call Short tone Phone network not

available High to low tone End call Two short tones when Volume at minimum

pressing Volume button or maximum during a call

Ascending tone Mute enabled Low tone Mute reminder

(repeated every 15 seconds)

Descending tone Mute disabled Low to high tone Connection

confirmation/voice activation

No audio indications; Out of range deteriorating quality

Two tones Low battery repeated every minute

INDICATOR LIGHT

With No Charger Plugged In

Headset Indicator Headset Status

Off Power off

Three blue flashes Powering on/off

Steady blue Pairing mode

Quick blue/purple flashes Pairing successful

Quick blue flash Incoming/outgoing call on primary phone

Quick purple flash Incoming.outgoing call on secondary phone

Slow blue pulse Connected (on a call)

Slow blue flash Standby (not on a call)

Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on.

Note: To disable the indicator light, press and hold both Volume buttons while turnng headset on.

INDICATOR LIGHT

With No Charger Plugged In

Headset Indicator Headset Status

Red flash Idle (not connected to phone)

Slow purple pulse Connected call muted

Quick red flash Low battery

Tip: Set your primary and secondary phones to different ring tones to know which phone is ringing when wearing the headset. See "Tips for using H710 with Two Phones" for more information.

Headset Indicator Headset Status

Red Battery level less than 50% charge

Yellow Battery level more than 50% charge

Green Charging complete

INDICATOR LIGHT

With the Charger Plugged In

CONTINUED

+ 1 hidden pages