Motorola MK3000 Product Reference Manual

MK3000 MICROKIOSK
FOR WINDOWS CE 5.0

PRODUCT REFERENCE
GUIDE

MK3000 MICROKIOSK FOR WINDOWS® CE 5.0

PRODUCT REFERENCE GUIDE

72E-146162-01

Revision A

September 2011

ii MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

© 2011 Motorola Solutions, Inc. All rights reserved.
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,

without permission in writing from Motorola. This includes electronic or mechanical means, such as
photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to
change without notice.

The software is provided strictly on an “as i s” basis. All sof twar e, including firmware, furnished to the user is on
a licensed basis. Motorola grants to the user a non-transferab le and non-exclusive license to use each
software or firmware program delivered hereunder (licensed program). Except as noted below, such license
may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of
Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted unde r
copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with
other program material, create a derivative work from a licensed program, or use a licensed program in a
network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on
the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in
whole or in part. The user agrees not to deco mpile, disassemble, decode, or reverse engineer any licensed
program delivered to the user or any portion thereof.

Motorola reserves the right to make changes to any software or product to improve reliability, function, or
design.

Motorola does not assume any product liability arising out of, or in connection with, the application or use of
any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc.,
intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in
Motorola products.

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the
property of their respective owners.

Motorola Solutions, Inc.
One Motorola Plaza
Holtsville, New York 11742-1300

http://www.motorolasolutions.com

Warranty

For the complete Motorola hardware product warranty statement, go to:

http://www.motorola.com/enterprisemobility/warranty.

Revision History

Changes to the original guide are listed below:

Change Date Description

-01 Rev A 9/2011 Initial release

iii

iv MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

TABLE OF CONTENTS

About This Guide

Introduction..................................................................................................................................... ix

Configurations................................................................................................................................. ix

Chapter Descriptions ...................................................................................................................... ix

Notational Conventions................................................................................................................... x

Related Publications....................................................................................................................... xi

Service Information......................................................................................................................... xi

Chapter 1: MK3000 Introduction

Overview ........................................................................................................................................ 1-1

Parts of the MK3000 ...................................................................................................................... 1-2

MK3000 Features .......................................................................................................................... 1-3

Touch Screen / LCD ................................................................................................................ 1-3

Speakers .................................................................................................................................. 1-3

Microphone .............................................................................................................................. 1-3

Bar Code Scanner/Imager ....................................................................................................... 1-3

Motion Sensor .......................................................................................................................... 1-4

Function Buttons ...................................................................................................................... 1-4

Reset Button ............................................................................................................................ 1-4

External Ports .......................................................................................................................... 1-4

Memory .................................................................................................................................... 1-5

Software ................................................................................................................................... 1-5

Magnetic Stripe Reader (Optional) .......................................................................................... 1-5

Mounting Options ..................................................................................................................... 1-5

Developer Kits .......................................................................................................................... 1-5

Bar Code Decoding ........................................................................................................................ 1-6

Scanning with the MK3000 ...................................................................................................... 1-6

Imaging with the MK3000 ........................................................................................................ 1-8

vi MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Chapter 2: Installation

Overview ........................................................................................................................................ 2-1

Unpacking the MK3000 ................................................................................................................. 2-1

Removing the Screen Protector ..................................................................................................... 2-2

Inserting a MicroSD Card .............................................................................................................. 2-2

Connecting the MK3000 ................................................................................................................ 2-2

Power Connection .................................................................................................................... 2-3

Wired Ethernet Connection to a Host ...................................................................................... 2-3

Wireless Ethernet Connection to a Host .................................................................................. 2-4

USB Connection to a PC and Peripherals ............................................................................... 2-5

MK3000 Mounting .......................................................................................................................... 2-6

Using a VESA Mount ............................................................................................................... 2-6

Using the MK3000 Wall Mount Kit ........................................................................................... 2-7

Using the MK3000 Pole Mount Kit ........................................................................................... 2-9

Magstripe Reader Installation ........................................................................................................ 2-11

Card Swiping ............................................................................................................................ 2-12

Chapter 3: Configuration

Overview ........................................................................................................................................ 3-1

System Configuration Manager ..................................................................................................... 3-1

File Types ................................................................................................................................ 3-1

User Interface .......................................................................................................................... 3-2

File Deployment ....................................................................................................................... 3-4

Local Configuration Using the Microsoft Windows Control Panel .................................................. 3-4

Configuration via Registry File ....................................................................................................... 3-4

Rebooting the MK3000 ............................................................................................................ 3-4

Chapter 4: System Features

Overview ........................................................................................................................................ 4-1

RegMerge and CopyFiles ...................................................................................................... ........ 4-2

Accessing the Windows CE Desktop ............................................................................................. 4-2

Network Time Update: SNTP Client .............................................................................................. 4-2

Memory Management .................................................................................................................... 4-2

Flash: Nonvolatile (Persistent) Memory ................................................................................... 4-2

RAM: Volatile (Non-Persistent) Memory .................................................................................. 4-2

Browser Applications ..................................................................................................................... 4-3

Loading Additional Fonts on the MK3000 ...................................................................................... 4-3

Using Additional Fonts in Native Applications .......................................................................... 4-4

Using Additional Fonts in Managed Applications ..................................................................... 4-4

Using Additional Fonts in Browser Applications ....................................................................... 4-4

Things to Consider when Using Additional Fonts .................................................................... 4-4

Input Panel and Keyboard ............................................................................................................. 4-4

Microsoft Applications .................................................................................................................... 4-4

Table of Contents vii

Chapter 5: Application Deployment

Software Installation on Development PC ..................................................................................... 5-1

Enterprise Mobility Developer Kit (EMDK) for C ...................................................................... 5-1

Enterprise Mobility Developer Kit (EMDK) for .NET ................................................................. 5-2

PocketBrowser for the Web ..................................................................................................... 5-3

Device Configuration Package ................................................................................................. 5-3

Platform SDK ........................................................................................................................... 5-3

Installing Enterprise Mobility Developer Kits ............................................................................ 5-4

Installing Other Development Software ................................................................................... 5-4

Deployment .................................................................................................................................... 5-4

ActiveSync ............................................................................................................................... 5-5

OS Update ............................................................................................................................... 5-7

Terminal Configuration Manager (TCM) .................................................................................. 5-8

Rapid Deployment Client ......................................................................................................... 5-22

AirBEAM Smart ........................................................................................................................ 5-22

Flash Storage ................................................................................................................................. 5-23

FFS Partitions .......................................................................................................................... 5-23

Working with FFS Partitions ..................................................................................................... 5-23

Non-FFS Partitions .................................................................................................................. 5-24

Downloading Partitions to the MK3000 .................................................................................... 5-24

Appendix A: Technical Specifications

Technical Specifications ................................................................................................................ A-1

Appendix B: Wireless Configuration

Overview ........................................................................................................................................ B-1

Appendix C: Maintenance and Troubleshooting

Overview ........................................................................................................................................ C-1

Maintenance .................................................................................................................................. C-1

Troubleshooting ............................................................................................................................. C-2

MK3000 Version Information ......................................................................................................... C-5

Index

Tell Us What You Think...

viii MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

ABOUT THIS GUIDE

Introduction

The MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide provides information on installing,

operating, and programming the MK3000.

NOTE Unless otherwise noted, the term MK3000 refers to all configurations of the device.

Configurations

This guide includes the following configurations:

•

MK3000-A30PZ0GWTWR - Imager, Ethernet

•

MK3000-AU0PZ0GWTWR - Laser scanner, Ethernet

•

MK3900-A30PZ0GWTWR - Imager, Ethernet, 802.11 a/b/g

•

MK3900-AU0PZ0GWTWR - Laser scanner, Ethernet, 802.11 a/b/g

Chapter Descriptions

Following are brief descriptions of each chapter in this guide.

•

Chapter 1, MK3000 Introduction provides an overview of the MK3000 that includes parts of the MK3000,

features, and scanning modes.

•

Chapter 2, Installation describes the hardw are se tu p an d installation of the MK3000.

•

Chapter 3, Configuration describes the configuration parameters of the MK3000.

•

Chapter 4, System Features describes the wide range of capabilities used to support independent

application development on the MK3000.

•

Chapter 5, Application Deployment describes the software development environments and how to install and

upgrade applications and images.

x MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

•

Appendix A, Technical Specifications provides technical information about the MK3000.

•

Appendix B, Wireless Configuration refers to the Wireless Fusion Enterprise Mobility Suite User Guide

for Version 3.00 for information on co nfiguring the wireless connection.

•

Appendix C, Maintenance and Troubleshooting provides maintenance and troubleshooting information,

and describes how to identify the MK3000 version.

Notational Conventions

This document uses these conventions:

•

“User” refers to anyone using an application on the terminal.

•

“Device” refers to the MK3000.

•

Italics are used to highlight specific items in the general text, and to identify chap ters and sectio ns in this
and related documents. It also identifies names of windows, menus, menu items, and fields within
windows.

•

Bold identifies buttons to be tapped or clicked.

•

Bullets (•) indicate:

• lists of alternatives or action items.

• lists of required steps that are not necessarily sequential.

•

Numbered lists indicate a set of sequential steps, i.e., those that describe step-by-step procedur es.

NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note

will not result in physical harm to the reader, equipment or data.

CAUTION This symbol indicates that if this information is ignored, the possibility of data or material damage may

occur.

WARNING! This symbol indicates that if this information is ignored the possibility that serious personal

injury may occur.

Related Publications

Following is a list of documents that provide additional information about configuring the MK3000:

•

MK3000 Quick Reference Guide, p/n 72-148309-xx

•

MK3000 Platform Software Development Kit (PSDK)

•

Enterprise Mobility Developer Kit (EMDK) for C

•

Enterprise Mobility Developer Kit (EMDK) for .NET

•

PocketBrowser

•

Device Configuration Package (DCP)

•

Wireless Fusion Enterprise Mobility Suite User Guide for Version 2.61, p/n 72E-113153-xx.

•

Microsoft Applications for Mobile and Windows CE 5.0 User Guide, p/n 72E-78456-xx

•

Control Panel User Guide, p/n 72E-114860-xx

•

AirBEAM® Package Builder Product Reference Guide, p/n 72-55769-xx.

About This Guide xi

•

AirBEAM® Smart Windows® CE Client Product Reference Guide, p/n 72-63060-xx

•

MSP 3.X User’s Guide, p/n 72E-100158-xx

For the latest version of these guides and software, visit: http://supportcentral.motorola.com.

Service Information

If you have a problem with your equipment, contact Motorola Solutions support for your region. Contact
information is available at: http://supportcentral.motorola.com.

When contacting Motorola Solutions support, please have the following information available:

•

Serial number of the unit

•

Model number or product name

•

Software type and version number
Motorola responds to calls by e-mail, telephone or fax within the time limits set forth in service agreements.
If your problem cannot be solved by Motorola Solutions support, you may need to return your equipment for

servicing and will be given specific directions. Motorola is not responsible for any damages incurred during
shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the
warranty.

If you purchased your business product from a Motorola business partner, please contact that business partner
for support.

xii MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

CHAPTER 1 MK3000 INTRODUCTION

Overview

The MK3000 MicroKiosk provides retail consumers access to data critica l to making an informed purchasing
decision. The MK3000 verifies prices on bar coded merchandise and obtains up-to-the-minute information on
in-store promotions. Its easy-to-read display can be used as an electronic billboard for instant in-store
merchandising and multimedia presentations to promote seasonal sales and upcoming events. The touch
screen and programmable function buttons enhance in-store applications and allow customer interaction.

1 - 2 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Touch Screen / LCD

Speakers

Scanner Window

Microphone

Function Buttons

Motion Sensor

Parts of the MK3000

Figure 1-1 and Figure 1-2 illustrate MK3000 parts. See MK3000 Features on page 1-3 for explanations of

these parts as well as other MK3000 features.

Figure 1-1

MK3000 Front View

MK3000 Introduction 1 - 3

Cable Run

Power

Mini-USB Host/Client Port

RJ45 (Ethernet)

MicroSD Card Slot

Headset Jack

Cable Run

Mounting Hole (4)

Cable Run

Mini-USB Host Ports (2)

Reset Button

Figure 1-2

MK3000 Features

The MK3000 supports the following features.

Touch Screen / LCD

The full-color 8-inch diagonal WVGA (800 X 480 pixels) LCD is ideal for presenting text, graphics, and video.
The touch screen accommodates greater user interaction and enhances custom designed applications.

Speakers

The MK3000 speakers are ideal for multimedia applications.

Microphone

The MK3000 includes a microphone built into its front housing.

Bar Code Scanner/Imager

The laser-based MK3000 decodes all traditional 1D bar codes (including GS1 Dat aBar bar code type). The
imager-based version decodes 1D bar codes as well as 2D symbologies such as PDF417. See Bar Code

Decoding on page 1-6. The scanner window protects the scan engine.

MK3000 Rear View

1 - 4 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Motion Sensor

The motion sensor detects motion in front of the MK3000 to trigger scanning.

Function Buttons

The MK3000 has four programmable function buttons (see Figure 1-1) that correspond to Up Arrow, Down
Arrow, Enter, and Escape from left to right, by default. You can remap these buttons to other functions using
the following registry key:

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]

Refer to the standard scan code table for key values. Defaults for the MK3000 function buttons are:

"Key1"=dword:00000048
"Key2"=dword:00000050
"Key3"=dword:0000001C
"Key4"=dword:00000001

Reset Button

Press and hold the reset button for 10 seconds to reboot the device.

External Ports

The MK3000 has the following external ports:

Power Port

A Motorola power supply connects to the power port (2.0 mm barrel jack connector) on the MK3000. For more
information, see Power Connection on page 2-3.

Mini-USB Ports

The MK3000 includes a Mini-USB 1.1 host/client po rt and two Mini-USB 1.1 host ports for peripheral
connections. For more information, see USB Connection to a PC and Peripherals on page 2-5.

RJ45 Ethernet / 10/100Base-T

Wired/Wireless Ethernet: Power through AC Outlet

The Ethernet / 10/100Base-T (10-conductor RJ45) port accommodates Ethernet data connection. The
MK3000 receives power through the Symbol approved power supply.

Wired Ethernet: Power through Power-over-Ethernet

The MK3000 supports Power-over-Ethernet (POE). An Ethernet (10/100Base-T) cable connected to the
Ethernet port provides both data communication an d power to the MK3000.

MicroSD Card Slot

The MK3000 contains a slot for microSD cards of up to 32 GB.

MK3000 Introduction 1 - 5

Headset Jack

The MK3000 includes a port for headset connection.

CAUTION When connecting a headset, Motorola recommends using cable ties or other securing mechanisms

outside the unit to provide strain relief.

Memory

The MK3000 standard system configuration con tains 128 MB RAM/64 MB S trat a NOR flash. The flash memory
is non-volatile and stores the system firmware, user applications, and data.

Software

Standard well-supported operating system and development tools ease application development for the
Microsoft
Explorer 6.0, C#, VisualBasic.NET, Windows CE Media Player, and PocketBrowser.

®

Windows® CE 5.0 operating system: Embedded Visual C/C++ 4.0, V isual Studio.NET, Internet

Magnetic Stripe Reader (Optional)

An optional three-track Magnetic Stripe Reader (MSR) module attaches to the MK3000 and adds the ability to
read and process loyalty card and credit card transactions. The MSR connects via USB to the MK3000.

Mounting Options

Y ou can mou nt the MK3000 on a desktop or wa ll using a commercially available bracke t or stand that conforms
to the 100 mm VESA Flat Panel Monitor Physical Mounting Interface (FPMPMI™) mounting standards. See

MK3000 Mounting on page 2-6.

Developer Kits

The following developer kits are available for the MK3000:

•

EMDK for C (see Enterprise Mobility Developer Kit (EMDK) for C on page 5-1) for developing native

C/C++ applications

•

PocketBrowser (see PocketBrowser for the Web on page 5-3) for web development

•

EMDK for .NET (see Enterprise Mobility Developer Kit (EMDK) for .NET on page 5-2) for developing

managed .NET applications in C# or VB.NET.

1 - 6 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Bar Code Decoding

The MK3000 decodes any traditional retail 1D or 2D (image r-based only) b ar code presente d in its fie ld of view.

Scanning with the MK3000

When scanning a bar code using the laser-based MK3000:

•

Hold the bar code at an angle that does not cause specular reflection (see Specular Reflection on page

1-7).

•

Hold the bar code close for small bar codes and farther away for large bar codes.

•

The MK3000 beeps to indicate a successful decode.

Figure 1-3

The scan beam does not have to be perfectly parallel with the top and bottom of the symbol (up to a 4
permitted). Ensure the symbol is in good condition.

Scanning with the MK3000

o

tilt is

MK3000 Introduction 1 - 7

No specular
reflection.
Decode can occur.

Side Views

Tilt Bar Code At Slight Angle (Up to 30°)

Specular reflection.

Reflected beam is

within specular dead

zone and prevents

decode.

Specular Reflection

When laser beams reflect directly back into the scanner from the bar code, they can “blind” the scanner and
make decoding difficult. This phenomenon is called specular reflection.

To avoid this, scan the bar code so that the beam does not bounce directly back. But do not scan a t too oblique
an angle; the scanner needs to collect scattered reflections from the scan to make a successful decode.
Practice quickly shows what tolerances to work within.

30°

Figure 1-4

When scanning a 1D bar code, there is only a small specular dead zone to avoid (+

Avoiding Specular Reflection

2o from the direct laser

beam). However , the scan ne r is not effective if its beams hit the bar code surface at an angle gr eater than 30

o

.

1 - 8 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

1D bar code symbol

2D bar code symbol

Correct

Incorrect

Imaging with the MK3000

When imaging, ensure the bar code is within the decode range and within the aiming pattern. The MK3000
beeps to indicate a successful decode.

Figure 1-5

Imaging with the MK3000

Place the symbol in any orientation within the aiming pa ttern. Ensure the entire symbol is within the rectan gular
area formed by the brackets in the aiming pattern. The red laser aiming pattern turns on to assist in aiming.

Figure 1-6

Imager Aiming Pattern: Bar Code Centered

Figure 1-7

Imager Aiming Pattern: Bar Code Not Centered

CHAPTER 2 INSTALLATION

Overview

This chapter describes MK3000 installation and setup, inclu d ing :

•

Unpacking the MK3000

•

Removing the Screen Protector on page 2-2

•

Inserting a MicroSD Card on page 2-2

•

Connecting the MK3000 on page 2-2

• Power Connection on page 2-3

• Wired Ethernet Connection to a Host on page 2-3

• Wireless Ethernet Connection to a Host on page 2-4

• USB Connection to a PC and Peripherals on page 2-5

•

MK3000 Mounting on page 2-6

•

Magstripe Reader Installation on page 2-11

Unpacking the MK3000

Remove the MK3000 from its packing and inspec t it for da mage. Keep the p acking, it is th e appr oved shipping
container and should be used if the MK3000 needs to be returned for servicing.

2 - 2 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Removing the Screen Protector

A screen protector is applied to the MK3000. Motorola recommends using this to minimize wear and tear.
Screen protectors enhance the usability and durability of touch screen displays.

To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift
it off the display.

CAUTION Do not use a sharp object to remove the protector. Doing so can damage the display.

For a package of five replacement screen protectors, contact Motorola.

Inserting a MicroSD Card

To use a microSD card, insert it into the slot in the back of the MK3000 as shown on the device. See Figure 1-2

on page 1-3 for slot location. To remove the card, press down gently on it to eject, then remove it from the slot.

Connecting the MK3000

The MK3000 supports both wired and wireless solutions. Connecting the MK3000 includes the following:

•

Power Connection on page 2-3 (not required for POE configurations)

•

Wired Ethernet Connection to a Host on page 2-3

• Power through AC Outlet

• Power through POE

•

Wireless Ethernet Connection to a Host on page 2-4

•

USB Connection to a PC and Peripherals on page 2-5

• Connecting to a PC - ActiveSync connection to a desktop computer for programming via the mini-USB

1.1 host/client port

• Connecting to Peripheral Devices - via the mini-USB 1.1 host ports

To access the Windows

®

CE Desktop, see Accessing the Windows CE Desktop on page 4-2.

Installation 2 - 3

Power Connection

The universal AC power supply connects to the power port on the MK3000 using a 2.0 mm barrel jack. The
power supply has a positive center pin and ground on the outer tab. It is compatib le with:

•

120V 60 Hz (North America)

•

230V 50 Hz (International excluding Japan)

•

100V 50/60 Hz (Japan).
To connect the power supply:

1. Insert the power supply barrel connector into the MK3000 power port. See Figure 1-2 on page 1-3.

2. Route the power cable.

3. Plug the Symbol AC power supply into a wall outlet.

Wired Ethernet Connection to a Host

Power through AC Outlet

The MK3000 communicates to the host through a 10/100Base-T Ethernet cable and receives power through
an AC power supply.

1. See Power Connection to provide power.

2. Connect the Ethernet cable to the RJ45 port on the MK3000. See Figure 1-2 on page 1-3.

3. Plug the other end of the Ethernet cable into the host system LAN port.

Power through POE

The POE 802.3at/af installation option allows the MK3000 to communicate and receive power on the same
10/100Base-T Ethernet cable.

1. Connect the Ethernet cable to the RJ45 port on the MK3000. See Figure 1-2 on page 1-3.

2. Plug the other end of the Ethernet cable into an 802.3at/af certified host system LAN port or 802.3at/af port

injector.

NOTE 802.3af host systems can provide power to the MK3000 via POE if certain peripherals are shut off. If POE

is not providing enough power, connect a power supply. See Power Connection.

2 - 4 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Pin 8 Pin 1

RJ45/Ethernet Connector Pinouts

Figure 2-1 identifies the locations for the Ethernet port pins, and Table 2-1 lists pin descriptions.

Figure 2-1

Table 2-1

1TXD (+)
2TXD (-)
3RXD (+)
4POE VCC
5POE VCC
6RXD (-)
7 POE GND
8 POE GND

8-Pin RJ45 Connector Port

RJ45/Ethernet Pin Descriptions

Pin Description

Wireless Ethernet Connection to a Host

For wireless configuration, refer to the Wireless Fusion Enterprise Mobility Suite User Guide for Version 2.61.

Installation 2 - 5

USB Connection to a PC and Peripherals

Connecting to a PC

To program the MK3000, connect it to a desktop PC:

1. See Power Connection on page 2-3 to provide power.

2. Connect a mini-B USB cable to the mini-USB host/client port on the MK3000. See Figure 1-2 on page 1-3

for port locations.

3. Connect the other end of the cable to a USB port on the host.

Connecting to Peripheral Devices

To connect a peripheral device such as a printer, a handheld scanner, a keyboard, or mouse:

1. Connect a mini-A USB cable to one of the mini-USB ports on the MK3000. See Figure 1-2 on page 1-3 for

port locations.

2. If necessary, connect a USB adapter cable (available from Motorola) to the mini-A USB cable.

3. Connect the other end of the cable to the peripheral device.

2 - 6 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

203.74

225

100

100

100

100

55

120

25

10

50

10

25

10

217.91

0.5

2.5

52.4

45.04

23.31

20.04

20.04

23.31

10

7.6

7.6

31.517 17

31.5

100

54.126

26

37

37

54

22.46

(10)

Note: Dimensions are in mm.

MK3000 Mounting

To mount the MK3000 on a wall or counter top, use a mounting bracket that conforms to the 100 mm VESA
specification. Also, Motorola offers an optional wall mount kit and pole mount kit for mounting the MK3000.

Using a VESA Mount

To mount the MK3000 using a 100 mm VESA mounting bracket:

1. The device’s mounting inserts are M4 x 8.1 mm. When selecting an appropriate screw type, ensure its

length does not penetrate the device’s back housing more than 8.1 mm after going through the mounting
plate.

2. Align the VESA mounting holes with the mounting holes on the back of the device.

3. Insert the screws through each of the four aligned mounting holes.

Figure 2-2 provides MK3000 dimensions for mounting reference.

Figure 2-2

MK3000 Mounting Dimensions

Installation 2 - 7

Mounting Screws (4)

Shoulder Screws (4)

Mounting Plate

Using the MK3000 Wall Mount Kit

To mount the MK3000 using the Wall Mount Kit:

1. Determine the MK3000 mounting location.

2. Secure the mounting plate to the wall using the four mounting screws provided.

3. Insert the four shoulder screws, also provided, into the mounting holes in the back of the MK3000.

Figure 2-3

4. Connect the cables to the MK3000 and route and secure them properly.

5. Mount the MK3000 by placing the shoulder screws through the four keyholes on the mounting plate, and

MK3000 Wall Mounting

slide the MK3000 over and down to secure.

2 - 8 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Locking Screw

6. Insert the locking screw through the hole in the tab at the side of the mounting plate. Hand tighten the

screw to secure the MK3000.

Figure 2-4

MK3000 Wall Mount Locking Screw

Installation 2 - 9

Shoulder Screws (4)

Mounting Plate

Mounting Screws (4)

Pole Mount Bracket

Using the MK3000 Pole Mount Kit

To mount the MK3000 to a pole using the Pole Mount Kit:

1. Connect the cables to the MK3000 and route and secure them properly.

2. Insert the four shoulder screws provided into the mounting holes in the back of the MK3000.

3. Secure the mounting plate to the pole mount bracket using the four mounting screws provided.

4. Mount the MK3000 by placing the shoulder screws through the four keyholes on the mounting plate, and

slide the MK3000 over and down to secure.

Figure 2-5

5. Route the pole mount straps through the pole mount bracket. Wrap them around the pole and tighten.

MK3000 Pole Mount Installation

2 - 10 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Pole Mount Straps

Locking Screw

6. Insert the locking screw through the hole in the tab at the side of the mounting plate. Hand tighten the

screw to secure the MK3000.

Figure 2-6

Securing Pole Mount

Magstripe Reader Installation

To install the optional MSR:

1. Secure the mounting plate to either side of the MK3000 using the four screws provided.

Installation 2 - 11

Figure 2-7

2. Secure the MSR to the plate using the two screws provided.

Securing the MSR Mounting Plate

Figure 2-8

Securing the MSR to the Mounting Plate

2 - 12 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

3. Connect the USB cable to one of the two mini-USB host ports.

Figure 2-9

Connecting the USB Cable

Card Swiping

Swipe a card through the MSR in either direction, with the magnetic stripe facing in toward the MK3000.

Figure 2-10

Card Swiping

CHAPTER 3 CONFIGURATION

Overview

This chapter describes how to set up and configure the MK3000 applications, communications, and network
settings which include parameters such as the device name, internet browser settings, date and time, and
several other key settings.

Configure these settings remotely using the System Configuration Manager (SCM), or locally on the MK3000
using the Control Panel. These settings are saved in the configuration registry file (mkconfig.reg) in th e
MK3000 Application folder to maintain them across cold boot cycles. For information on using the Control
Panel, refer to the Microsoft Applications for Mobile and Windows CE 5.0 User Guide.

System Configuration Manager

The System Configuration Manager (SCM) is a Windows®-based utility that runs on a host computer and
creates/edits an MK3000 configuration file (mkconfig.reg). Load this file onto the MK3000 and reboot the
MK3000 to set configuration parameters for the device. The configurable options for the MK3000 are defined in
an XML file that is available from Support Central at http://www.motorola.com/enterprisemobility/support. SCM
is also available at Support Central.

SCM eliminates the potential user errors that occur when manually editing registry settings.

File Types

SCM uses three types of files:

•

Symbol Configuration Template (.SCT) files are XML files that define the configurable p a rameters for a

device.

•

Registry Configuration Service Provider XML files for device provisioning.

•

CAB Provisioning Format (.CPF) file which is a .CAB archive that contains the provisioning XML. This file

is downloaded to the MK3000 and merged upon a cold boot.

3 - 2 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

User Interface

SCM's user interface consists of a tree control on the left side of the window that displays all the configuration
categories, and a data grid table on the right which displays all the configurable controls for the selected
category. Figure 3-1 shows the main window for a device’s .sct file.

Figure 3-1

Main SCM Window

Menu Functions

Use the main menu to access the program functionality described in Table 3-1.

Table 3-1

File Menu

Open Config File Open a saved configuration file (.SCD).
Save Config Changes Save changes to the currently loaded configuration file.
Restore All Defaults Restore all parameter values to the default state. The default values are stored in

Export Changes to .xml Export the changed parameter values to an XML file.
Export Changes to .cpf Export the changed parameter values to an CPF file.
Export all to .xml Export all the parameter values to an XML file.
Export all to .cpf Export all the parameter values to an CPF file.
Exit Exit System Configuration Manager.

SCM Menu Functions

Menu Item Description

a Symbol Configuration template file.

Configuration 3 - 3

Table 3-1

SCM Menu Functions (Continued)

Menu Item Description

Device Menu

Device type Change the current device type template. Each template (available from Support

Central) must reside in the SCM directory.

Help Menu

About

About Display the

dialog which shows the application version.

Parameter State Indicators

The first column of the data table displays parameter state indicators. The state indicators display one of the
states in Tab l e 3- 2 for a particular parameter:

Table 3-2

Icon Indicator Description

Parameter Status Indicators

Modified This parameter was changed from its initial factory setting.

Invalid This parameter is not valid for the selected device type. This can occur when a

configuration file for one type of device is loaded and the device type is changed

Device

using the

menu. Values marked “invalid” are not exported.

Window Status Bar

The SCM status bar on the bottom right corner of the window contains the items in Table 3-3 from left to right:

Table 3-3

Invalid Count Number of parameters not valid for the selected device.
Modified Count Number of parameters modified from the factory defaults.
Device Type Device type - version.

Figure 3-2

The sample status bar in Figure 3-2 shows that the current configuration file contains 1 Invalid Parameter and
2 Modified Parameters.

Window Status Bar Items

Status Bar Item Description

Sample Status Bar

3 - 4 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

File Deployment

Deploy the CPF file created using the SCM export function to the MK3000.

1. Optionally, use the Authenticode tools to sign the .cpf file.

2. Make the .cpf file read-only, then copy it to the MK3000.

3. Tap the filename to install.

4. Certain applications and settings require a cold boot to take affect. In these cases, cold boot the MK3000.

For more information on file deployment, see Deployment on page 5-4.

Local Configuration Using the Microsoft Windows Control Panel

Use the Control Panel on the MK3000 Start menu to change settings locally. For information on using the
Control Panel, refer to the Control Panel User Guide.

Configuration via Registry File

Before downloading the configuration file (.reg file) to the MK3000 Application folder, rename it mkconfig.reg.
Use one of the following methods to download the file to the MK3000:

•

Copy the mkconfig.reg file to the MK3000 Application folder using a USB ActiveSync connection (see

Downloading Files to the MK3000 on page 5-6).

•

Send the file to the MK3000 Application folder using FTP (see the instructions provided with the FTP
software) or AirBeam.

•

Copy the mkconfig.reg file to a microSD card, then transfer the file into the MK3000 Application folder.

Rebooting the MK3000

After downloading the mkconfig.reg file, cold boot the MK3000 to apply the new settings.

Cold Boot

Press and hold reset button on the side of the MK3000 for 10 seconds, then release, OR remove and apply
power.

Warm Boot

Run the Warmboot application. Select Start > Programs > Warmboot. Alternatively, use the Application
Program Interface (API).

CHAPTER 4 SYSTEM FEATURES

Overview

This chapter discusses the following operating system features:

•

RegMerge and CopyFiles on page 4-2

•

Accessing the Windows CE Desktop on page 4-2

•

Network Time Update: SNTP Client on page 4-2

•

Memory Management on page 4-2

•

Loading Additional Fonts on the MK3000 on page 4-3

•

Input Panel and Keyboard on page 4-4

•

Microsoft Applications on page 4-4

4 - 2 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

RegMerge and CopyFiles

RegMerge and CopyFiles are two device drivers included in the Windows CE OS to assist developers in
configuring the MK3000 following a cold boot. See Flash Storage on page 5-23 for more information.

Accessing the Windows CE Desktop

If an MK3000 is configured to launch an application on power-up, you can bypass the application at boot-up to
access to the Windows

®

CE desktop.

Network Time Update: SNTP Client

The MK3000 Simple Network Time Protocol (SNTP) client can automatically set and update the MK3000 time
and date through the network. Use this feature to set the system time an d date af ter reboot s or power out ages.
This feature also ensures consistent time an d da te stamping across a fleet of MK3000s. The SNTP Client
program queries the specified SNTP server over the network to set the time and date.

The SNTP client shipped with MK3000 Windows CE 5.0 is the Microsoft default SNTP Client program.

Memory Management

Flash: Nonvolatile (Persistent) Memory

The MK3000 64 MB configuration has 64 MB of available nonvolatile flash memory. 5 MB is committed for
platform partition use to install external driver packs such as RF drivers, and 27 MB is available for developer’s
applications within the application partition (folder). The data partition (folder) has no available memory. The
data stored in flash memory persists through cold boot cycles.

To increase usable persistent (flash) memory, use the Terminal Configuration Manager (TCM) to adjust the
allocation of memory between the application and data partitions. See Chapter 5, Application Deployment.

Add a microSD card to the MK3000 to increase the non-volatile memory available for file storage.

RAM: Volatile (Non-Persistent) Memory

The MK3000 has 128 MB of DRAM volatile memory. Developers can automate control of the device’s RAM
(volatile) memory allocation (storage vs. memory used to run programs) to persist memory allocation settings
through cold boot cycles.

Browser Applications

The PocketBrowser development tool allows Web developers to quickly create robust applications that can
include a wide range of advanced data capture capabilities. The PocketBrowser Developer Help provides
information on using each feature of the browser. Each feature includes a sample, however the sample does
not necessarily show the only way to implement each feature.

PocketBrowser extends the core rendering engine functionality of Microsoft PocketIE or Microsoft IE with
Symbol application programming interfaces (APIs). It provides interfaces to device hardware and features
using meta tags and Microsoft ActiveX
PocketBrowser offers easy integration with bar code scanners, RFID readers, and other peripherals such as
printers and magnetic stripe readers (MSR) for complete transaction processing.

®

components designed specifically for Symbol systems.

Loading Additional Fonts on the MK3000

You can program the MK3000 to support additional fonts such as Unicode and double-byte character font.
The MK3000 supports the following system fonts as shipped from the factory. The font files corresponding to

these formats are located in the

\windows folder with .ttf extension.

System Features 4 - 3

•

Arial

•

Comic Sans MS

•

Courier New

•

Georgia

•

Symbol

•

Tahoma

•

Times New Roman

•

Verdana

•

Wingding.
The default system font path for these fonts is \windows.
Use one of the following options to load fonts not supplied with the MK3000:

•

Change the system font path where the system looks for fonts. For example, to change default system

font path from

in

\application\fonts:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontPath]

"FontPath"="\application\fonts"

Adding this registry changes the entire system fonts directory, so fonts supplied with the OS ar e no

longer available. To use both the provided system fonts and new fonts, copy the system default fonts to

the new font directory.

\windows to \application\fonts add the following registry to the system along with new fonts

•

Copy new/alternate fonts to the default \windows directory.

•

Copy alternate fonts to the \windows\fonts directory.
Copying new fonts to the \windows or \windows\fonts pr eserves existing fonts. However the new fonts

consume system RAM as they are part of the ObjectStore.

4 - 4 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Using the third option, i.e., copying fonts to the \windows\fonts directory, makes it easier to manage the system.
Note that fonts copied to \windows or \windows\fonts do not persist over power cycles or cold boots. Use the
copy file feature to persist them over power cycles or cold boots.

Using Additional Fonts in Native Applications

Any application written in EVC can use the additional fonts using either MFC or Win32 APIs. If a spe cified font
is missing, the system uses an available font for display.

Using Additional Fonts in Managed Applications

All fonts installed in the system are available to the .Net Compact Framework during runtime.

Using Additional Fonts in Browser Applications

Regardless of how you installed the font in the system, to reference it using a browse r page, speci fy the font as
a STYLE, or use FONT tags. Use intuitive names for the fonts (use FontViewer on a Windows desktop and
locate the
Internet Explorer uses its default font to display the text.

Typeface Name line), and use quotes to enclose names with spaces. If the specified font is missing,

Things to Consider when Using Additional Fonts

•

Different font styles (e.g., bold and italic) often require separate TTF files; be sure to provide all required
styles. Do not reference styles by name (e.g., Arial Bold); set the style separately from the font (e.g.,
using a “b” or “strong” tag, or a style).

•

For best results, do not direct the system font path to a storage card (PCMCIA), as this can negatively
impact system performance. If this method is necessary, test the use of a storage card thoroughly for
fonts to ensure proper operation.

•

Most Web pages contain information that tells the browser what language encoding (the language and
character set) to use. If the page does not include that information, and the Language Encoding
Auto-Select feature is on, Internet Explorer can usually determine the appropriate language encoding. If
not, manually select it using

NOTE If the Auto-Select feature or a specific language pack is not installed, Internet Explorer prompts you to

download the files. Adding languages does not guarantee Web pages display in the preferred language.

View menu > Encoding > More, then select the appropriate language.

Input Panel and Keyboard

Use the input panel or full keyboard on the touchscr een o f the MK300 0 to enter info rmation. To access, tap the

icon in the icon tray, then select

keys. To close the

Input Panel or Keyboard, double-tap the icon.

Input Panel or Keyboard. To enter information, use a stylus to select the

NOTE Use Ctrl-C to copy text, and Ctrl-V to paste text.

Microsoft Applications

The MK3000 includes Microsoft WordPad, Windows Media Player, and Internet Explorer. For information on
using these applications, refer to the Microsoft Applications for Mobile and Windows CE 5.0 User Guide.

CHAPTER 5 APPLICATION DEPLOYMENT

Software Installation on Development PC

To develop applications to run on the MK3000, use one or all of the following:

•

Enterprise Mobility Developer Kit (EMDK) for C for developing native C/C++ applications

•

Enterprise Mobility Developer Kit (EMDK) for .Net for developing managed .NET applications

•

Enterprise Mobility Developer Kit (EMDK) for Java for developing browser-based applications

•

PocketBrowser for support for web development.

Enterprise Mobility Developer Kit (EMDK) for C

The Enterprise Mobility Developer Kit for C is based on industry-standard Microsoft® Windows® CE
development tools and enables development of native C and C++ applications. Use this developer kit in
conjunction with Microsoft
and MK3000 Platform Software Development Kit (PSDK).

®

Embedded Visual C++ 4.0 Service Pack 3, Microsoft® Visual Studio 5.0 or later,

EMDK for C includes the following components:

•

Standard Symbol C API Libraries

•

MK3000-specific C API Libraries

•

Help file containing a C API Reference Guide

•

Sample applications with full source code.

5 - 2 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Sample Applications

The sample applications are included as a learning tool, to show developers how to inter face with the Symbol
C API functions. Some of the sample applications contained in the kit include:

•

Hello: A simple Hello World application.

•

DisplayTest: Displays various colors on the LCD screen.

•

KeyCheck: A keyboard checking utility that displays the keys pressed on the device and their associated

WM_MESSAGE.

•

ScanSamp2: Demonstrates the bar code scan engine (and external scanner).

•

MSRSamp2: Displays the MSR track data when a card is swiped.

•

MemTest: Displays the amount of available memory. Allocate and free blocks of memory to see how

available memory changes.

•

Win32PrintSamp: Prints a sample page to a connected printer.

NOTE The MK3000 supports the Signature Capture API via the EMDK for C only. Refer to the Enterprise Mobility

Developer Kit version 1.4 or later, under MK Series C APIs - Signature Capture.

Enterprise Mobility Developer Kit (EMDK) for .NET

The Enterprise Mobility Developer Kit for .NET allows Microsoft® .NET Compact Framework developers to
create managed (C# and VisualBasic.NET) applications that harness value-add features on the MK3000.

The EMDK for .NET includes the following components:

•

Class libraries

•

Sample applications

•

Documentation describing how to use the methods for each class library

Application Deployment 5 - 3

PocketBrowser for the Web

PocketBrowser is a web development kit that provide s ac cess to the functionalities of a Motorola device. The
PocketBrowser is used across all vertical markets and in a wide variety of applications, enabling developers
and integrators to provide advanced Web-based solutions for Motorola devices. Transfer a PocketBrowser
application from one Motorola device to another seamlessly without recompiling or rewriting it.

PocketBrowser features include:

•

Blocking users from the Microsoft operating system

•

Exposing the full screen area to the Web application designer

•

Seamless integration with bar code scanning

•

Wireless connectivity

•

Magnetic stripe readers.

Device Configuration Package

Use the Device Configuration Package (DCP) to configure the MK3000 by creating and downl oading hex
images that represent flash partitions to the MK3000. The DCP includes the user documentation, flash
partitions, Termin al Con fig u ra tio n Ma n ager (TC M) , an d th e as soc i at ed TCM scrip ts.

To install the DCP for the MK3000:

1. Download the DCP from the Support Central web site,

http://www.motorola.com/enterprisemobility/support:

a. On http://www.motorola.com/enterprisemobility/support, select Software Downloads.
b. Select MicroKiosks and then select MK3000.
c. Select the Device Configuration Package (DCP).
d. Save the .exe file to the development computer.

2. Locate the .exe file on the development computer, double-click the file, and follow the install screen

prompts.

3. Once installed, access the major components of the DCP from the Symbol Device Configuration Package

(DCP) for MK3000 program group of the Windows Start Menu.

Platform SDK

To download and install the Platform SDK:

1. Download the appropriate Platform SDK from the Support C entr al we b site ,

http://www.motorola.com/enterprisemobility/support:

a. On http://www.motorola.com/enterprisemobility/support, select Software Downloads.
b. Select MicroKiosks and then select MK3000.
c. Select the Platform SDK.
d. Save the .exe file to the development computer.

2. Run the file and follow the screen prompts to install.

5 - 4 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Installing Enterprise Mobility Developer Kits

To install an EMDK:

1. Download the EMDK from http://www.motorola.com/enterprisemobility/support
a. On http://www.motorola.com/enterprisemobility/support, select Developer Downloads and sign in.
b. Select MicroKiosks and then select MK3000.
c. Select the latest version of the Enterprise Mobility Developer Kit.
d. Download the .exe file to the development computer.

2. Double-click the executable file and follow the install screen prompts.

Installing Other Development Software

Developing applications for the MK3000 may require installing other development software such as application
development environments on the development PC. Follow the installation instructions provided with this
software.

Deployment

With the appropriate accessory, software, and connection, the MK3000 can share information with the host
device. This chapter provides information about installing software and files on the MK3000.

Download and install software using one of the following methods:

•

ActiveSync (see page 5-5)

•

OS Update (via microSD card) (see page 5-7)

•

Terminal Configuration Manager (TCM) (see page 5-8)

•

FTP server using Rapid Deployment (see page 5-22)

•

AirBEAM (see page 5-22).

Application Deployment 5 - 5

ActiveSync

The MK3000 communicates with a host computer via USB connection using Microsoft® ActiveSync (version

4.5.1 or higher), enabling data transfer data between a host computer and the MK3000. Microsoft Activesync
allows copying and pasting (rather than synchronizing) files between the MK3000 and host computer.

Installing ActiveSync

To install ActiveSync on the host computer, download the latest version of the software from
http://www.microsoft.com. Refer to the installation instructions included with the ActiveSync software.

Connecting the MK3000 to the Host Computer

To configure ActiveSync for Guest access (suitable for copying files between the host computer and the
MK3000):

1. Connect the USB cable to the mini USB host/client port on the MK3000 (see Figure 1-2 on page 1-3).

Connect the other end of the cable to a USB port on the host computer.

2. If the New Partnership window does not appear, on the host computer, select Start > Programs > Microsoft

ActiveSync

.

Figure 5-1

3. Click No and then Next. The Microsoft ActiveSync Guest Connected window displays.

Figure 5-2

New Partnership Window

Microsoft ActiveSync Guest Connected Window

5 - 6 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Downloading Files to the MK3000

To download files (such as the mkconfig.reg file) from the host computer to the MK3000, use Windows
Explorer to copy the files:

1. On the host computer, select Explore.

Figure 5-3

2. Double-click the folder to expand the contents of the folder.

Figure 5-4

ActiveSync Explorer

My Pocket PC Contents

3. Use Explorer to locate the host computer directory that contains the file to download. Tap that directory in

the left pane to display its contents in the right pane.

Application Deployment 5 - 7

4. Drag the desired file(s) from the host computer to the desired mobile device folder.

•

Program Files folder: files stored in this folder are discarded after a cold boot.

•

Application folder: files stored in this folder are retained after a cold boot.

NOTE Cold booting the MK3000 erases all files in RAM. Be sure to save any critical files in the Application folder,

e.g., radio profile, time zone setting, license keys. See Downloading Files to the MK3000 on page 5-6.

OS Update

To upgrade the operating system using a microSD card:

1. Install the DCP onto the desktop computer.

NOTE If you use a firewall, the firewall may prevent some files from installing. To verify that the DCP installation

completes, ensure the following folder contains files, and is not empty:
<Y our drive: >\Program Files\Symbo l Device Configuratio n Package\MK3000c50\<version number folder>
\OSUpdate\Images.

2. Insert a microSD card with at least 1 GB of storage into the MK3000. See the Inserting a MicroSD Card on

page 2-2.

3. Connect the MK3000 to power and to the desktop computer via a USB cable, and set up a partnership

between the two computers using ActiveSync. See ActiveSync on page 5-5.

4. In the ActiveSync window on the desktop computer, select Explore.

5. On the drive in which you installed the DCP (typically C:), navigate to the directory:

\Program Files\Symbol Device Configuration Packages\MK3000c50\V1.0\

6. Copy the OSUpdate folder into the My Device\SC Card\ folder on the MK3000.

7. On the MK3000, tap Start > Programs > Windows Explorer.

8. Navigate to \SD Card\OSUpdate folder.

9. Double-tap the MK3000c50BenColor_SD.LNK file.

10. After the update completes and the MK3000 reboots, remove the microSD card.

5 - 8 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Terminal Configuration Manager (TCM)

Terminal Configuration Manager (TCM) is an application that runs on the host computer and customizes flash
file system partitions for the MK3000. The most common use is to create an application p artition hex file that
contains the customer's application. Also use TCM to load hex files to the flash memory of the MK3000.

TCM scripts control the customization of partitions. The scripts cont ain all the informatio n for building an image.
The script is a list of copy commands specifying the files to copy from the development computer to the
partition.

TCM works with a pair of directory windows, one displaying the script and the other displaying the source files
on the development computer. Use standard Windows drag-and-drop operations to add and delete files from
the script window.

The DCP for MK3000 includes scripts Motorola uses to build the standard factory-installed Platform and
Application partitions on the MK3000. The standard Platform partition contains drivers and the Application
partition contains demo applications and optional compon en ts. The standard TCM scr ipts are in the follo win g
folder: C:\Program Files\Symbol Device Configuration Packages\MK3000 v1.0\TCM Scripts.

NOTE Before creating a script to build a hex image, identify the files required (system files, drivers, applications,

etc.) and locate the files’ source directories to ease the script building process.

The processes for building a hex image in TCM include:

•

Starting TCM

•

Defining script properties

•

Creating the script for the hex image

•

Building the image

•

Download the hex image to the MK3000

•

Creating a splash screen

•

Flash storage.

Initial Program Loader (IPL)

Use IPL to download files to the MK3000, to download customized flash file system partitions to the MK3000,
and load hex files to the flash memory of device.

A typical partition is a group of files, combined into a single “partition” that represents a specific area of storage.
Examples of partitions are the flash file systems such as Platform or App lication. ( Using the d esktop comp uter
comparison, these partitions are roughly equivalent to a C: or D: hard disk drive.) In addition to the “hard disk”
partitions, some partitions are used for single items such as the operating system, monitor, or splash screen.
(Again using a desktop computer comparison, these partitions are roughly the equivalent of the BIOS or
special hidden system files.) Updating a partition erases all data previously in its storage region, i.e., it is not a
merge but a replacement operation.

Use TCM to create partition images for selected partitions. All partition images suitable for use by IPL are in
hex file format for transfer by TCM from the development computer to the MK3000.

Upgrade requirements:

•

The hex files to download (on development computer)

•

A connection from the host computer and the MK3000 (either serial or wireless)

•

TCM (on development computer) to download the files.

Application Deployment 5 - 9

Upgrade the device by invoking IPL and navigating the menus. See Downloading the Image u sing IPL on page

5-14 for procedures on downloading a hex file to the MK3000.

Starting TCM

Click the Windows start menu TCM icon (Symbol Device Configuration Packages, MK3000) to st art TCM. The

TCM window displays two child windows: Script1 and File Explorer. The Script1 window contains a new script

and the

File Explorer window contains a file explorer view for selecting files to place in the script.

Figure 5-5

TCM Startup Window

Table 5-1 lists the components of the TCM window.

Table 5-1

TCM Components

Icon Component Function

Script Window Displays the files to use in creating the partition(s).

File Explorer Window Lists the files to add to the script.

Create button Creates a new script file.

Open button Opens an existing script file.

Save button Saves the current script file.

Large icons button Views the current script items as large icon.

Small icons button Views the current script items as small icon.

List button Views the current script items as a list.

5 - 10 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Table 5-1

TCM Components (Continued)

Icon Component Function

Details button Views the current script items with more details.

About button Displays version information for TCM.

Properties button Views/changes the current script properties.

Build button Builds the current script into a set of hex files.

Check button Checks the script for errors (files not found).

Send button Downloads the hex image to the vehicle computer.

Tile button Arranges the sub-windows in a tiled orientation.

Build and Send Builds the current script into a set of hex images and sends the hex

images to the device.

Preferences button Views/changes global TCM options.

Defining Script Properties

Before creating a script, define the script properties, such as the type of device, flash type, number of disks
being created, and the memory configuratio n of each disk partition .

To define the script properties:

1. Select the Script window to make it active.

2. Click the Properties button. The Script Properties window > Partition Data tab appears.

Figure 5-6

Script Properties Window - Partition Data Tab

3. In the T erminal drop-down list, select the terminal type.

4. Use the default Flash T ype.

5. In the Disks drop-down list, select the number of disk partitions to create.

Application Deployment 5 - 11

6. Select the (memory) Size for each partition. Note that adding space to one disk partition subtracts it from

another.

7. In the Access drop-down list for each disk partition, determine and select the Read/Write access option.

8. Click the Options tab. The Script Properties window Options tab appears.

Figure 5-7

9. Set the paths for the Script File, Flash File, and Hex File Build.

10. Click OK.

Script Properties Window - Options Tab

Creating the Script for the Hex Image

On start-up, TCM displays the TCM window with the Script1 window and File Explorer window pointing to the
following directory:

\Program Files\Symbol Device Configuration Packages\MK3000\TCMScripts\

The Script1 window directory pane displays two partitions: Platform and Application. Depending on the type of
flash chip, the number of partitions can change. You can add files to each of the partitions. TCM functionality
includes:

•

Opening a new or existing script file

•

Copying components to the script window

•

Saving the script file.

Opening a New or Existing Script

You can create a script file from scratch or based on an existing script file. Click Create to create a new script
or click Open to open an existing script (for example, a script provide d in the DCP for M K3000). If you o pen an
existing script and make changes, saving the changes overwrites the original script. To use an original or
Motorola supplied standard script as a base and save the changes in a new script, use the Save As function to
save the script using a different file name.

5 - 12 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Updating TCM 1.X Scripts

You can upgrade script files created with older versions of TCM to TCM 2.0 scripts. Click Open to open an
existing script created with an older version of TCM. The Conversion window appears.

Figure 5-8

Conversion Window - Upgrading to TCM 2.0

Copying Components to the Script

Script contents are managed using standard file operations such as New Folder, Delete and Rename. Items can
be added to the script by clicking files and folders in the
window. The
holding the

File Explorer window supports standard windows; multiple files may be selected by clicking while

SHIFT or CTRL keys.

File Explorer window and dragging them to the Script

Saving the Script

Modifications to a script file can be saved using the Save or the Save As function. Saving changes to an existing
script writes over the original script. To use a Motorola-supplied standard script as a base and save the
changes in a new script, use the

Save As function.

Building the Image

After creating the script, build the hex image defined by the script.
As part of the build, TCM performs a check on the script which verifies that all files referenced in the script

exist. This check is important for previously created scripts to ensure that files referenced in the script are still
in the designated locations.

To build scripts:

1. Click Build on the TCM toolbar. The Configure Build window appears.

Figure 5-9

2. Select the items (partitions) to build using the check box(es) to the left of each named partition.

3. Use the Build Path to define where to store all built partitions.

Configure Build Window

Application Deployment 5 - 13

4. Select (hex image) COMPRESSION to reduce the size and speed up the download.

5. Click OK and follow the on-screen instructions.

If one of the partitions is the ESSID, a prompt appears requesting the ESSID value. Deselect the HR (High
Rate) check box when building ESSID images for a device with an FH radio.

Figure 5-10

If one of the partitions is the Splash Screen, a prompt appears requesting both the source Bitmap file and
the destination HEX file.

6. TCM performs a check, and if there are no errors, creates the partition hex files.

If the build fails, TCM does not create the hex files and displays an error message. Two common reasons for a
build failure are:

•

•

Build ESSID Partition Window

TCM could not find the files defined in the script. This error can occur when the files referenced by the
script are no longer stored on the development computer or the folders where they are stored were
renamed.

The total amount of flash memory space that the script requires exceeds the image size. To correct this,
reduce the number of files in the partition or increa se the size of the partition. See Defining Script

Properties on page 5-10 for more information about setting the image size appropriately.

5 - 14 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Downloading the Image using IPL

After building the hex file, download it to the MK3000 using IPL.

1. Hold the MK3000’s right and left buttons until the mobile computer resets into IPL. The Initial Program
Loader

2. Connect the MK3000 to the host computer.

menu appears.

Initial Program Loader

Platform
Application
Config Block
Windows CE
Monitor
Spla sh S creen
Partition Table
System Reset
Auto Select

Figure 5-11

3. Choose Auto Select or use the up and down scroll buttons to select the partition to download, then press

Initial Program Loader (IPL) Menu

CAUTION To ensure a successful download, do not remove power from the mobile computer while in IPL mode.

NOTE If the platform or application partition sizes are changed, you must first download a new partition table.

Enter.

Table 5-2

IPL Menu Partitions

Partition Name Description

Platform Contains the files in the
Application Contains the files in the

Platform
Application

folder.

folder.
Windows CE Contains the operating system for the mobile computer.
Monitor Contains the Monitor and IPL programs.
Splash Screen Contains the splash screen that displays while booting the mobile computer.

Note: Splash screens are g enerat ed from .bmp images and must be less than or equal to
240 pixels wide and 296 pixels deep. For mono displays, the bmp image must be 4 bpp
and for color screens the color depth must be 8 bpp. Note: 8 bits per pixel only applies to
splash screen images. Once Windows CE is running, the c olor densi ty is 16 bits per pixel.

Application Deployment 5 - 15

Table 5-2

IPL Menu Partitions (Continued)

Partition Name Description

Partition Table Contains the partition information for all other partitions.

Note: The partition table should never need changing unless the si zes of the plat form and
application images are changed within TCM. If this is done, then the new partition table

should be loaded first, followed by both platform and application in any order.
System Reset Selecting this item provides a simple method to exit IPL and to boot the o perating system.
Auto Select Selecting this item allows one or more files to be downloaded without having to manually

select the destination. (The content of the files being downloaded automatically directs

the file to the correct destination.) For technical reasons, Auto Select cannot be used to

download Monitor, Power Micro, or Partition Table. These items must be specifically

selected.

4. IPL displays the Select Transport menu, which lists the available methods of downloading the file.

Select Transport

USB
Previous
Top

Figure 5-12

5. Use the up and down scroll buttons to select USB, then press Enter.

6. IPL displays the USB Configuration menu, which lists the available methods of downloading the file.

Select Transport Menu

USB Configuration

USB Standard
Previous
Top

Figure 5-13

7. Use the up and down scroll buttons to select USB Standard, then press Enter.

Select Transport Menu

5 - 16 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

8. The Download File? menu appears.

Download File?

Download
Cancel
Show Parms
Previous
Top

Figure 5-14

9. Use the up and down scroll buttons to select Show Parms to verify the file to download. Press Enter to

display the

Download File? Menu

Parameters screen.

Download:
“Partition Name” via
USB USB Standard

Press Enter to Continue

Figure 5-15

Partition Name is the name of the partition selected in the Initial Program Loader menu.

10. Press Enter to return to the Download File? menu.

Parameters Screen

11. Use the up and down scroll buttons to select Download. Press Enter. The Downloading screen appears.

Downloading:
“Partition Name”

via USB USB Standard
Waiting for input...

Application Deployment 5 - 17

Figure 5-16

12. On the development computer, click Load on the TCM toolbar. The Load Terminal window > Serial tab

Downloading Screen

appears.

Figure 5-17

13. Select the Image Files To Load.

14. In the Comm Port drop-down list, select USB: Symbol Device.

15. Click Download to begin the operation.

16. During download, the Downloading screen on the MK3000 displays the Device Status and a progress bar.

Load Terminal Window - Serial and Ethernet Tabs

17. When complete, Device Status displays Result was: Success!, or in the case of an error, the cause of the

error.

5 - 18 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Calibrating the Screen

Use the Calibration screen to align the touch screen:

1. Remove and restore power to the MK3000 to reboot.

Figure 5-18

2. Carefully press and briefly hold the stylus tip on the center of the Calibration screen target. Repeat the

Calibration Screen

NOTE To access the Calibration screen from the Windows CE Control Panel, tap Start > Settings > Control

Panel. Double-tap the Stylus icon, tap the Calibration tab, and tap the Recalibrate button. The
Calibration screen appears.

procedure as the target moves and stops at different locations on the screen.

3. The Confirm Calibration screen displays. Tap the screen to accept the settings, or wait 30 seconds and the

MK3000 returns to the Calibration screen.

TCM Error Messages

TCM validates the cells in the partition table when you click the Execute button. Cells highlighted in red con tain
an error. Partition loading is disabled until all errors are corrected.

Table 5-3

Failed to build images: flash
file system DLL not loaded!

Failure finding directory xxx Building process failed because directory xxx was not found.
Failure creating volume Building process failed because a certain disk volume could not be created.

TCM Error Messages

Error Description/Solution

TCM could not load the DLL required to build images for the targeting flash
file system. Reinstall TCM or recover the DLL.

Failure adding system file to
image

Build process failed because TCM failed to add a certain system file to the

disk image.
INVALID PATH The path for the image file to build is not valid.
Nothing Selected To Build In the Config Build window, no item is selected to build.
Illegal ESS ID In the Build ESSID Partition window, no ESS ID was entered or the ESS ID

entered was illegal.

Application Deployment 5 - 19

Table 5-3

Disk Full TCM failed to create Hex image file at the selected path. Check available disk

Target Disk Full Build process failed because TCM failed to add file to the image of a disk

Hex file is READ ONLY The Hex image file to be created exists and is read-only. Delete the existing

Error opening the file xxx with
write access

Failure creating binary file TCM failed to open/create an intermediate binary file.
Hex File To load is missing or

invalid
Could not locate MK3000

name in TCM.ini file

Incorrect disk sizes in TCM.ini
file

TCM Error Messages (Continued)

Error Description/Solution

space.

volume. Remove some files or increase the disk size.

file or change its attribute.
TCM could not open file xxx with write access. Check if file is in use.

In Load Terminal window, the file selected to load has invalid status.

While loading the Script Properties window, TCM could not find the TCM.ini
section corresponding to the MK3000 type specified by the current opening
script. Either TCM.ini or the script file is invalid.

The total disk size specified in the script does not match the total disk size
defined in the corresponding TCM.ini section. Check if the script is corrupt or
the TCM.ini has changed after the script was created.

INVALID DIRECTORY In Script Properties window, the selected System File Path is not a valid

directory.

One of the disk sizes is one
sector in size

INVALID VOLUME NAME In Script Properties window, one of the volume labels is not valid.
Corrupt TCM.INI file! (Invalid

value of VolumeDivisor)
Invalid version of TCM script

file
Corrupt or missing TCM.ini

file
FAILED CONNECTION TO

COM PORT (Could not get
status)

FAILED CONNECTION TO
TERMINAL (Terminal Not
Connected Properly/Terminal
Not Ready to Receive)

In Script Properties window, one of the disks is too small (one sector in size).
This may cause problem while building images, especially when cushion is
enabled. Increase the disk size.

The VolumeDivisor entry is missing or invalid in the TCM.ini. Reinst all TCM or
recover TCM.ini.

The TCM script was not created by this version of TCM.

TCM could not find TCM.ini file.

While downloading images to MK3000, TCM failed to conne ct to th e selecte d
COM port. Check if the COM port is free and is properly configured.

While downloading images, TCM failed to connect to the MK3000. Check if
the correct flow control protocol is selected and the MK3000 is properly
connected and is in a listening state.

5 - 20 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

IPL Error Detection

While receiving data, IPL performs many checks on the data to ensure that the device received the data
correctly. If IPL detects an error, it immediately aborts the download and reports the error on an error screen.
This screen displays until you press any key, then IPL returns to the
for a new selection.

To find the probable cause of the error, use the error number and/or the error text displayed on the screen to
look up the error in Tab le 5- 4.

Initial Program Loader main menu to wait

Table 5-4

Unknown error -1 A general error occurred. Retry the download. If the failure persists,

Cancelled by user -2 The user canceled the download.
Can't open the source -7 An error occurred opening the source device (either radio card or

Can't open the
destination

Can't read from the
source device

Can't write to the
destination device

Transmission checksum
error

IPL Errors

Error Text

Error

Number

it is most likely due to a hardware failure; the mobile computer
requires servicing.

Serial port). Check source device connectivity and retry.

-8 An error occurred opening the destination device (either flash ROM
or Power Micro). Retry the download. If the failure persists, it is most
likely due to a hardware failure; the mobile computer requires
servicing.

-9 The source device (eithe r radio card or Serial port) could no t be read
from. Check source device connectivity and retry.

-10 The destination device (either flash ROM or Power Micro) could not
be written to. Retry the download. If the failure persists, it is most
likely due to a hardware failure; the mobile computer requires
servicing.

-1 1 An error occurred during transmission from the source device (either
radio card or Serial port) and the checksum check failed. Check
source device connectivity and retry.

Probable Cause

Readback checksum
error

There is no more heap
space available

Insufficient data available
to complete record

Invalid Symbol HEX file -23 A Symbol HEX file download was attempted but the HEX file is

Unrecognized or
unsupported HEX record

-12 A checksum, generated from reading back data that was written to
the destination device, was incorrect. An error during transmission or
a write error to the destination device could cause this.

-14 There is no more heap space available for the download procedure.
Restart IPL and retry the download. If the failure persists, contact
service with details of what is being downloaded.

-21 A Symbol HEX file download was attempted but the HEX file is
invalid. Ensure the file is in Symbol HEX file format.

invalid. Ensure the file is in Symbol HEX file format.

-24 The Symbol HEX file being downloaded contains an invalid or
unrecognized HEX record. Ensure the file is in proper Symbol HEX
file format.

Application Deployment 5 - 21

Table 5-4

IPL Errors (Continued)

Error Text

Error

Number

Probable Cause

Invalid data in HEX file -25 The Symbol HEX file being downloaded contains invalid data.

Ensure the file is in proper Symbol HEX file format with valid HEX
data.

Exceeded max size -26 The download file is too large to fit into the space allocated for it.

Either make the file smaller or increase the space allocated for it by
altering the partition table.

Partition is not valid on
this device

-27 The downloaded file specifies a partition entry that does not exi st on
the device. Only download files that are valid for this device, or
change the partition table so that the new file is valid on the device.

Wrong destination code -28 A specific partition was chosen from the Main Menu (not Auto

Select) but the file selected for download was for another partition.
Ensure that the partition selected from the Main Menu matches the
file selected for download.

File type does not support
IPL Auto Select

Non-contiguous record
found

-29 Monitor, Power Micro and Par tition Table cannot be loaded with Auto
Select. Select the appropriate area, and try again.

-30 A Symbol HEX file download was attempted but the HEX file is
invalid. Ensure the file is in Symbol HEX file format.

Timed Out - No data -31 IPL was waiting fo r dat a from th e source devic e but timed out befo re

receiving any. Check the source device connectivity and retry.

Fail: Buffer Overrun -32 The serial port device could not keep up with incoming data. Retry

the serial download with a lower baud rate.

Partition Table not Valid -33 The size of flash memory is different than that described in the

partition table. Retry the download with the correct p artit ion t able fi le.

Invalid file format -34 The file format is invalid. Only Symbol HEX files are supported by

IPL.

Creating a Splash Screen

The DCP for MK3000 includes the source bitmap files that create the default splash screens. You can
customize the screen by modifying these files using any of the standard windows image editors.

To create a custom splash screen:

1. Use an image editor to open the Splashcolor.bmp file included with the DCP for MK3000.

2. Modify the bitmap file and save.

3. Create a splash partition. See Building the Image on page 5-12.

If you don’t use the default files to create the new splash screens, be sure to preserve the image format of 320
x 216, 8 bits per pixel. Note that 8 bits per pixel only applies to splash scr een images. Once Windows CE is
running, the color density is 16 bits per pixel. See Downloading the Image using IPL on page 5-14 for
information about loading the splash screen using TCM.

5 - 22 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Rapid Deployment Client

The Rapid Deployment (RD) Client facilitates software downloads to an MK3000 from a Mobility Services
Platform (MSP) Console’s FTP server. The MSP Console is a web-based interface to the wireless
infrastructure monitoring and management tools provided by the MSP Lite or MSP Enterprise server.

When software packages transfer to the FTP server, an MK3000 on the wireless network can download them
by scanning RD bar codes encoding the location of the software packages. Multiple MK3000s can scan a
single RD bar code.

NOTE For detailed information about the Rapid Deployment Client and creating RD bar codes, refer to the MSP

3.X User’s Guide.

AirBEAM Smart

The AirBEAM Smart product transfers specially designed software packages between a host server and
Motorola wireless device. Before transfer, AirBEAM Smart checks and compares package version, so that only
updated packages load.

AirBEAM Smart resides on radio-equipped clien t de vice s and allows them to re qu e st, down load , an d install
software, as well as to upload files and status data. A single communications session can accomplish both
download and upload of files. The ability to transfer software over a radio network can greatly reduce the
logistical efforts of client software management.

In an AirBEAM Smart system, a network-accessible host server acts as the storage point for the software
transfer. The AirBEAM Smart Client uses the industry standard FTP or TFTP file transfer protocols to check the
host system for updates and, if necessary, to transfer updated software.

NOTE For more information about AirBEAM Smart, refer to the AirBEAM

Reference Guide and

AirBEAM Package Builder Product Reference Guide.

®

Smart Windows® CE Client Product

Flash Storage

In addition to the RAM-based storage standard on Windows CE devices, the MK3000 also includes a
non-volatile flash-based storage area which can store data (partitions) that a cold boot cannot corrupt. This
flash area is divided into two sections: flash file system (FFS) partitions and non-FFS partitions.

FFS Partitions

The MK3000 includes two FFS partitions. These partitions appear to the MK3000 as a hard drive that the OS
file system can write files to and read files from. Data is retained even if power is removed.

The two FFS partitions appear as the following two separate folders in the Windows CE file system:

•

Platform: The Platform FFS partition contains Motorola-supplied programs and Dynamic Link Libra rie s
(DLLs). This FFS is configured to include DLLs that control system operation. Since the MK3000 needs
these drivers for basic operation, only experienced users should modify the content of this partition.

•

Application: The Application FFS partition stores applicatio n pr og ra m s need ed to op er a te the MK3000.

Working with FFS Partitions

Application Deployment 5 - 23

Because the FFS partitions appear as folders under the Windows CE file system, you can read and write to
them like any other folder. For example, an application program can write data to a file located in the
Application folder just as it would to the Windows folder. However, the file in the Application folder is in
non-volatile storage and is not lost on a cold boot (e.g., when power is removed for a long period of time).

Y ou can use st andard tools such as ActiveSync to copy files to and from the FFS p artitions. They appear as the
Application and Platform to the ActiveSync explorer . This is useful when inst alling applications on the MK3000.
Applications stored in the Application folder are retained even after a cold boot.

There are two device drivers included in the Windows CE image to assist developers in configuring the
MK3000 following a cold boot: RegMerge and CopyFiles.

RegMerge.dll

RegMerge.dll is a built-in driver that allows making registry edits to the Windows CE Registry. Regmerge.dll
runs very early in the boot process and looks for registry files (.reg files) in certain flash file system folders
during a cold boot. It then merges the registry changes into the system registry located in RAM.

Since the registry is re-created on every cold boot from the default ROM image, the RegMerge driver is
necessary to make registry modifications persistent over cold boots.

RegMerge looks in the root of two specific folders for .reg files in the following order:

\Platform
\Application

Regmerge continues to look for.reg files in these folders until it checks all folders. This allows folders later in
the list to override folders earlier in the list. This way, it is possible to override Registry changes made by the
Platforms partitions folders. Take care when using Regmerge to make Registry changes. The DCP contains
examples of .reg files.

NOTE Regmerge only merges the .reg files on cold boots. A warm boot skips the merge process.

5 - 24 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Typically, you would not modify the registry values for drivers loaded before RegMerge, although this may be
necessary during software development. Since these early loading drivers read these keys before RegMerge
can change them, you must cold boot the MK3000. The warm boot does not re-initialize th e registry and the
early loading driver reads the new registry values.

Do not use Regmerge to modify built-in driver registry values, or merg e th e same Reg i stry value to two files in
the same folder, as the results are not predictable.

CopyFiles

Windows CE expects certain files to be in the Windows folder, residing in volatile storage. Windows CE
maintains the System Registry in volatile storage. CopyFiles copies files from one folder to another on a cold
boot. Files can be copied from a non-volatil e p artitio n (Application or Pl at form) to the Win dows or othe r volatile
partition during a cold boot. During a cold boot CopyFiles looks for files with a .CPY extension in the root of the
Platform, then the Application FFS partitions. These files are text files containing the source and destination for
the desired files to copy, separ ated by “>”. The demo application partition included in the DCP contains the
following example from the file application.cpy. Alternatively, obtain this from the Support Central web site a t

http://www.motorola.com/enterprisemobility/support.

Files are copied to the Windows folder from the flash file system using copy files (*.cpy) in the following order:

\Platform
\Application

Example:

\Application\ScanSamp2.exe>\Windows\ScanSamp2.exe

This line directs CopyFiles to copy the ScanSamp2.exe application from the \Application folder to the
\Windows folder.

Non-FFS Partitions

Non-FFS Partitions include additional software and data pre-loaded on the MK3000 that you can upgrade.
Unlike FFS Partitions, these partitions are not visible when the operating system is running. They also contain
system information. Non-FFS partitions include the following:

•

Windows CE: The complete Windows CE operating system is stored on flash devices. If necessary, you
can download the entire OS image to the MK3000 usi ng Motorola provided files. The TCM installation
package includes the current OS partition on the MK3000. Obtain any upgrades from Motorola. This
partition is mandatory for the MK3000.

•

Splash Screen: a bitmap smaller tha n 16 kb (a nd limite d to 8 bi ts per pixel) appears as the MK3000 cold
boots. To download a cust om ized screen to display, see Creating a Splash Screen on page 5-21.

NOTE 8 bits per pixel only applies to splash screen images. Once Windows CE is running, the color density is

16 bits per pixel.

•

Partition Table: Identifies where each partition is loaded in the MK3000.

Downloading Partitions to the MK3000

Use TCM to specify a hex destination file for each partition and download each file to the MK3000. This
download requires a program loader stored on the MK3000.

APPENDIX A TECHNICAL SPECIFICATIONS

Technical Specifications

Table A-1

Physical Characteristi cs

Dimensions 8.87 in. H x 8.87 in. W x 2.17 in. D

Weight 1.9 lbs./0.86 kg
Display Size: 8 in. diagonal WVGA LCD

Power DC power: 24v
Expansion Capabilities MicroSD card slot (user accessible); USB host
Data Ports 1 Mini USB 1.1 host/client; 2 Mini USB 1.1 host; Ethernet RJ-45
Audio Two integrated stereo speakers; microphone
Scanner Laser version for capture of 1D codes

1D Laser Scanner Decode Capability

MK3000 Technical Specifications

Item Description

22.5 cm H x 22.5 cm W x 5.5 cm D

Resolution: 800 x 480 pixels
Resistive Touch Screen: standard

Imager version for capture of 1D, 2D, and PDF417 codes

1D Symbologies

UPC/EAN-128, UPCA, UPCE, UPC/EAN Supplementals (disabled in
demo browser application), GS1 DataBar, Chinese 2 of 5, Code 93,
Discrete 2 of 5, Interleaved 2 of 5 (including ITF14 and ITF 2 of 5),
Codabar, ISBT 128

: Code 39, Code 128, EAN-8, EAN-13,

A - 2 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Table A-1

MK3000 Technical Specifications

Item Description

2D Imager Decode Capability:

1D Symbologies

: Code 39, Code 128, EAN-8, EAN-13,
UPC/EAN-128, UPCA, UPCE, UPC/EAN Supplementals (disabled in
demo browser application), GS1 DataBar, Chinese 2 of 5, Code 93,
Discrete 2 of 5, Interleaved 2 of 5 (including ITF14 and ITF 2 of 5),
Codabar, ISBT 128

2D Symbologies

: PDF417, QR, Aztec, DataMatrix, MaxiCode

Performance Characteristics

CPU Bulverde (PXA270) 624MHz processor
Operating System Windows CE 5.0
Browser Internet Explorer 6.0; PocketBrowser
Memory 128 MB RAM / 64 MB flash
Additional Memory Up to 32 GB flash using accessible microSD slot
Communications WLAN:

802.11a: up to 54 Mbps

802.11b: up to 11 Mbps

802.11g: up to 54 Mbps
Ethernet: 10/100 Mb Ethernet

Power-over-Ethernet 802.3af, 802.3at

User Environment

Operating Temperature 32F° to 104°F / 0° to 40°C
Storage Temperature -40°F to 158°F / -40°C to 70°C
Humidity 5% to 85% (non-condensing)

Software

Available Applications Rapid Deployment Client

Motorola Mobility Services Platform (MSP)

Application Development Tools PocketBrowser for web development

Enterprise Mobility Developer Kit (EMDK) for C for developing native
C/C++ applications

Enterprise Mobility Developer Kit (EMDK) for .NET for developing
managed .NET applications in C# or VB.NET

Peripherals and Accessories

Mounting Options Conforms to the VESA 100mm mounting standard for attachment of

third-party, off-the-shelf mounting solutions; four (4) M4 x 8.1 mm
inserts provided

APPENDIX B WIRELESS CONFIGURATION

Overview

To configure the MK3000 11 Mbps wireless connection, refer to the Wireless Fusion Enterprise Mobility Suite
User Guide for for Version 2.61, p/n 72E-113153-xx.

B - 2 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

APPENDIX C MAINTENANCE AND

TROUBLESHOOTING

Overview

This chapter provides maintenance and troubleshooting in formation, and describes how to identify the MK3000
version.

Maintenance

Clean the housing and touch screen / LCD with a damp cloth and, if necessary, a non-ammonia based
detergent. Do not allow any abrasive material to touch the screen.

CAUTION Excessive liquids can damage the protective screen and necessitate replacement.

C - 2 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Troubleshooting

When configuring the MK3000, save and reboot the MK3000 to apply the change s.

•

MK3000 does not turn on on page C-3

•

MK3000 appears to lock up upon bootup on page C-3

•

MK3000 does not respond to polls from the host computer on page C-3

•

MK3000 does not send data to host computer on page C- 3

•

Scanner does not recognize configuration bar codes on page C-3

•

Reg file values are not copied into the Registry at boot time on page C-3

•

The screen does not respond to pen input on page C-3

•

Need to determine a device MAC address on page C-3

•

The wireless MK3000 does not retain its WEP Key encryption after a reboot on page C-4

•

The Mobile Companion icon does not appear in the task tray on page C-4

•

When downloading files to the MK3000 from a .zip file using ActiveSync, a message displays indicating
there is not enough free disk space to copy the application on page C-4

•

When downloading a large file over Ethernet, IE issues an insufficient memory message on page C-4

•

When upgrading using a microSD card, the MK3000 cannot find files on the card on page C-4

•

Flash file system is corrupt on page C-4

•

Copying large amount of files from PC card to the application folder fails with error "Access is denied" on
page C-4

Maintenance and Troubleshooting C - 3

Table C-1

Troubleshooting

Problem Possible Causes Possible Solutions

MK3000 does not turn on No power to the

MK3000.

MK3000 appears to lock up upon
bootup

A utility with no user
interface was specified
as the first user
application, or user
application failed to run.

MK3000 does not respond to polls
from the host computer

No communication
between the host and
MK3000.

Connect the Symbol approved power supply
to an AC power source and to the MK3000
power connector. See

1-3

.

Figure 1-2 on page

Either specify no user application, or a
UI-based application as the first user
application. If no user application is
specified, Explorer.exe is used.

Note: this is a substitution of Explorer .exe as
the user application, not protected mode.

Check cables to the MK3000. Ensure the
MK3000 address is the address the host is
polling.

Check communication parameters.

Open a command window using

Start > Programs > Command

ipconfig

to list the status of all radio and

and type

Ethernet interfaces.

MK3000 does not send data to host
computer

Scanner does not recognize
configuration bar codes

Reg file values are not copied into
the Registry at boot time

The screen does not respond to pen
input

Need to determine a device MAC
address

MK3000 is not
programmed to work
with the host.

MK3000 is not
connected to the host.

The scan driver does not
support parameter bar
code scanning.

More than one .reg file
and duplicate registry
entries are present.

The screen is not
properly calibrated, or is
off center.

Check setup communication parameters.

Check cables to host computer.

Configure the scanner using scanning
C API scanner object.

Review all .reg files in /Application and
/Platform and ensure they have no conflicts.

Re-calibrate the screen.

Start > Programs > CommandPrompt

Open
Type ipconfig /all

to display the MAC address next to
‘address’.

.

C - 4 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

Table C-1

Troubleshooting (Continued)

Problem Possible Causes Possible Solutions

The wireless MK3000 does not
retain its WEP Key encryption after
a reboot

The Mobile Companion icon does
not appear in the task tray

When downloading files to the
MK3000 from a .zip file using
ActiveSync, a message displays
indicating there is not enough free
disk space to copy the application

When downloading a large file over
Ethernet, IE issues an insufficient
memory message

Encryption keys not
saved in
Spectrum24.reg.

The radio software is not
present in the \platform
folder.

Files cannot download
directly from a .zip file.

For some file types, IE
requires free RAM
equivalent to twice the
file's size.

Set encryption keys using Mobile
Companion, then select

Spectrum24

to save them to

Start > Tools > Save

Spectrum24.reg.
Check communication parameter settings.
Open a command window using

Programs > Command

and type

Start >

ipconfig

to
list the status of all radio and Ethernet
interfaces.

Verify presen ce of radio software or re-in stall
\Platform partition software.

Extract/unzip the files to the host computer,
then transfer the unzipped files to the
MK3000 using ActiveSync.

This is an IE limitation.

When upgrading using a microSD
card, the MK3000 cannot find files
on the card

Flash file system is corrupt Reset or power loss

Copying large amount of files from
PC card to the application folder

The microSD card is
absent, corrupt, or not
supported.

during write to file
system.

Archive bit of the folder
properties set.

Replace the microSD card. The MK3000
supports up to a 32 GB microSD card.

Format file system partition using

Settings > Control Panel > Storage Manage r

Start >

and re-install partition data.
Clear the archive bit of folder properties.

,

fails with error "Access is denied"
When using SaveConfig to save

settings and cycling power before
the Save Complete message

Corrupt mkconfig.reg file. Use ActiveSync to delete the existing

mkconfig.reg file or use Monitor to repartition
the Application partition.

appears, the device does not boot
properly.

Similarly, when using C API to save
configurations, the device does not
boot properly.

If problems still occur, see MK3000 Version Information on page C-5 for system information before calling for
service help.

MK3000 Version Information

Maintenance and Troubleshooting C - 5

If an MK3000 is configured to launch an application on power-up, bypass this upon booting to access the
Windows

1. From the Windows

2. Select MK3000 identification from the Control Panel window to view the following information:

®

CE Desktop. See Accessing the Windows CE Desktop on page 4-2.

®

task bar, select Start > Settings > Control Panel.

• Device name

• Description

• OS version

• Monitor version

• Display type

• Memory sizes.

C - 6 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide

INDEX

A

AC power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

accessing the Windows® CE desktop . . . . . . . . . . . 4-2

ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5, 5-7

connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

downloading files . . . . . . . . . . . . . . . . . . . . . . . . 5-5

installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

advertisement insert . . . . . . . . . . . . . . . . . . . . . . . . 2-11

aiming

pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

B

bar code scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

buttons

function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

C

CAB files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-18, C-3

chapter descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . .ix

clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

cold boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23

communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

ethernet, wired . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

ethernet, wireless . . . . . . . . . . . . . . . . . . . . . . . . 2-4

USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

companion programs

internet explorer . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

media player . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

wordpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

configuration file

downloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix

connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

to host computer . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

wired ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

wireless ethernet . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

cpf file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

creating via SCM . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

creating splash screen . . . . . . . . . . . . . . . . . . . . . . . 5-21

D

date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

DCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi, 5-1, 5-7

deployment

file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

developer kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

EMDK for C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

EMDK for NET . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

PocketBrowser . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Device Configuration Package . . . . . . . xi, 5-1, 5-8, 5-11,

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21, 5-23, 5-24

download

configuration file . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

to host computer . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

E

EMDK for C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

EMDK for Java . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

EMDK for Net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

EMDKs

for C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

for NET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

PocketBrowser . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Enterprise Mobility Developer Kit for C . . . . . . . . . . . 5-1

Index - 2 MK3000 MicroKiosk Windows CE 5.0 Product Reference Guide

Enterprise Mobility Developer Kit for Java . . . . . . . . . 5-1

Enterprise Mobility Developer Kit for Net . . . . . . . . . . 5-1

error messages . . . . . . . . . . . . . . . . . . . . . . . .5-18, 5-20

ethernet setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

10/100Base-T port connection . . . . . . . . . . . . . . 1-4

wired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

F

features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

file deployment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

file explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

flash file system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23

downloading partitions . . . . . . . . . . . . . . . . . . . 5-24

non-FFS partitions . . . . . . . . . . . . . . . . . . . . . . 5-24

splash screen . . . . . . . . . . . . . . . . . . . . . . . 5-24

partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23

copyfile . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24

regmerge . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23

flash memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

flash storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23

font loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

function buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

H

headset jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

host communications

ethernet, wired . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

ethernet, wireless . . . . . . . . . . . . . . . . . . . . . . . . 2-4

L

LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-3

loading fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

M

maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-1

media player . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 4-4

memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

memory management . . . . . . . . . . . . . . . . . . . . . . . .4-2

microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

microSD card . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4, 4-2

inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

slot location . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

microsoft applications

internet explorer . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

media player . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

wordpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

Mobility Services Platform Console . . . . . . . . . . . . .5-22

motion sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 2-6

pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9

VESA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6

wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

MSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-22

N

I

IE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

information, service . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi

installing

ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

advertisment insert . . . . . . . . . . . . . . . . . . . . . . 2-11

connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

development tools . . . . . . . . . . . . . . . . . . . . . . . . 5-4

mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

pole mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

VESA mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

internet explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

IPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

booting into . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

error messages . . . . . . . . . . . . . . . . . . . . . . . . . 5-20

menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

nonvolatile memory . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . .x

NTP, see SNTP

O

operating system upgrade . . . . . . . . . . . . . . . . . . . . .5-7

OS upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7

P

partitions

downloading . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-24

FFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-23

non-FFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-24

splash screen . . . . . . . . . . . . . . . . . . . . . . .5-24

PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4, C-4

PCMCIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4, C-4

peripheral connection

USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

PocketBrowser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

POE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4

Index - 3

setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Ethernet / 10/100Base-T . . . . . . . . . . . . . . . . . . 1-4

headset jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

RJ45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4, 2-5

power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

AC power supply . . . . . . . . . . . . . . . . . . . . . . . . 2-3

options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

POE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

power-over-ethernet . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

printer

connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

debugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

program memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

programmable buttons . . . . . . . . . . . . . . . . . . . . . . . 1-4

programs

flash file system . . . . . . . . . . . . . . . . . . . . . . . . 5-23

R

RAM memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

rapid deployment client . . . . . . . . . . . . . . . . . . . . . . 5-22

RD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22

rebooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

recalibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18

related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi

reset button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

S

scan beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-3

scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

bar code scanning . . . . . . . . . . . . . . . . . . . . . . . 1-6

SCM

file deployment . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

file types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

parameter indicators . . . . . . . . . . . . . . . . . . . . . . 3-3

user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

XML provisioning . . . . . . . . . . . . . . . . . . . . . . . . 3-1

screen calibration . . . . . . . . . . . . . . . . . . . . . . .5-18, C-3

screen protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

scripts

creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

SD card, micro . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4, C-4

inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

slot location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

setup

advertisement insert . . . . . . . . . . . . . . . . . . . . . 2-11

inserting microSD card . . . . . . . . . . . . . . . . . . . . 2-2

mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

pole mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

USB to PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

VESA mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

wired ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

wired ethernet AC outlet . . . . . . . . . . . . . . . . . . . 2-3

wired ethernet, POE . . . . . . . . . . . . . . . . . . . . . . 2-3

wireless ethernet . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Simple Network Time Protocol, see SNTP

SNTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

software developer kits

EMDK for C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

EMDK for NET . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

PocketBrowser . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-3

specular reflection . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

splash screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24

creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21

storage memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Symbol configuration manager

file deployment . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

file types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

parameter indicators . . . . . . . . . . . . . . . . . . . . . . 3-3

user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

XML provisioning . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

T

TCM

building hex image . . . . . . . . . . . . . . 5-8, 5-12, 5-13

creating script . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

defining properties . . . . . . . . . . . . . . . . . . . . . . . 5-10

error messages . . . . . . . . . . . . . . . . . . . . . . . . . 5-18

hex image download . . . . . . . . . . . . . . . . . . . . . 5-14

saving script . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

touch screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-3

troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . C-2, C-3

Index - 4 MK3000 MicroKiosk Windows CE 5.0 Product Reference Guide

U

unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

updating data

time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

upgrade

OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

USB

cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

peripheral connection . . . . . . . . . . . . . . . . . . . . . 2-5

port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

V

volatile memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

W

wordpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

X

XML provisioning

SCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Tell Us What You Think...

Very familiar Slightly familiar Not at all familiar

We’d like to know what you think about this Manual. Please take a moment to fill out this questionnaire and fax this form
to: [phone], or mail to:

Motorola Solutions, Inc.
One Motorola Plaza M/S B-10
Holtsville, NY 11742-1300
Attention: Technical Publications Manager

Advanced Data Capture Division

IMPORTANT: If you need product support, please call the appropriate customer support number provided. Unfortunately,
we cannot provide customer support at the fax number above.

Manual Title:___________________________________________
(please include revision level)

How familiar were you with this product before using this manual?

Did this manual meet your needs? If not, please explain.
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________

What topics need to be added to the index, if applicable?
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________

What topics do you feel need to be better discussed? Please be specific.
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________

What can we do to further improve our manuals?
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________

Thank you for your input—We value your comments.

Motorola Solutions, Inc.
One Motorola Plaza
Holtsville, New York 11742, USA
1-800-927-9626
http://www.motorolasolutions.com

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are
the property of their respective owners.
© 2011 Motorola Solutions, Inc. All Rights Reserved.

72E-146162-01 Revision A - September 2011