Motorola Focus 72, Focus 72-2, Focus 72-3, Focus 72-4 Focus 72-W, Focus 72-W2 Operation Manual

...

USER’S GUIDE

Wi-Fi® Outdoor Home Video Camera

Model: Focus 72, Focus 72-2, Focus 72-3, Focus 72-4 Focus 72-W, Focus 72-W2, Focus 72-W3, Focus 72-W4

The features described in this user’s guide are subject to modications without prior notice.

Welcome...

to your new Motorola Wi-Fi® Outdoor Home Video Camera!

Thank you for purchasing your new Motorola Wi-Fi® Outdoor Home Video Camera. If you have always wondered what happens when you are away, wonder no more. Now you can monitor your children, pets or property with this easy to use system. You can install the Camera only from your iPhone®/iPad® or Android™ devices and view the Camera video from your PC or Notebook, as well as from your iPhone®/iPad® or Android™ devices.

Please keep your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.

For product related questions, please call:

+491805 938 802 in Europe

_________________________________________________________________

This User’s Guide has all the information you need to make the most out of your product. Please read the Safety Instructions on pages 5 - 7 before you install the unit.

Inside the Box

●

1x Wi-Fi Camera Unit

●

1x Antenna

●

1x Power Adapter

●

1x Quick Start Guide

●

3x Mounting Screws and Dry Wall Plugs

●

1x Wrench Key

●

1x Lan Cable Connector

In multi-camera packs, you will find one or more additional Camera Units with power adapter units.

Email: motorola-mbp@tdm.de

Overview of your Camera

RED LED GREEN LED

1. Antenna

2. Camera Base Plate

3. Camera Lens

4. IR-LED Window

5. Motion detect Window

6. Cable

7. Power Socket

8. Pair Button

9. LAN Socket

10. Status LED

* An Ethernet connection is required when the Wi-Fi® connection is not optimal. Connect the Ethernet cable (not supplied) to the LAN interface, and then connect the other end to a spare port on your router.

Important guidelines for installing your Wi-Fi® Camera Unit

• Use of other 2.4 GHz products, such as other wireless networks, Bluetooth™systems or microwave ovens may cause interference with this product. Keep the Wi-Fi® Camera Unit away from these types of products, or turn them off if they appear to be causing interference.

• Always ensure that you have a good Wi-Fi® connection available.

Table of contents

1. Safety Instructions .....................................................................................5

2. System Requirements .................................................................................7

3. Getting started - Connecting Devices ......................................................8

3.1 How to register your Camera to Hubble account ......................................... 8

3.1.1 Setting Up the Camera ...................................................................... 8

3.1.2 Install your Camera .............................................................................. 9

3.1.3 How to assemble the waterproof plug for the LAN cable ............... 11

3.1.4 Status of LED Indication: .................................................................. 12

3.2 User Account and Camera Setup on Android™ Devices ............................ 13

3.2.1 Power ON and Connect the Camera ............................................. 13

3.2.2 Download the Hubble App .............................................................. 13

3.2.3 Run Hubble for Motorola Monitors App on Android™ Devices .... 13

3.2.4 Add the Camera to your account ...................................................... 14

3.3 User Account and Camera Setup on iPhone®/iPad

3.3.1 Power ON and Connect the Camera ............................................. 17

3.3.2 Download the Hubble App .............................................................. 17

3.3.3 Run Hubble for Motorola Monitors App on iPhone®/iPad

3.3.4 Add the Camera to your account .................................................... 18

4. App menu ................................................................................................21

5. Working with PC/Notebook .................................................................... 22

6. Help .......................................................................................................... 23

7. General Information ................................................................................29

8. Technical Specications ..........................................................................33

® .............................. 17

® ......... 17

Table of contents

1. Safety Instructions

WARNING:

Wi-Fi® CAMERA UNIT SET UP & USE

• Determine a location for the Wi-Fi best view of the area you would like to monitor (ie back yard or front door).

• Fix the camera to a fla t wall using the wall mounting plate an d following the instructions provided.

WARNING

This Wi-Fi® Camera Unit is compliant with all relevant electromagnetic eld standards and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.

• Keep this user’s guide for future reference.

• Do not cover the Wi-Fi

• Test the Wi-Fi prior to use.

• Do not install the Wi-Fi

• Only use the power adapter provided. Do not use other power adapters as this may damage the device.

• Never use extension cords with power adapters.

• Do not touch the plug contacts with sharp or metal objects.

Camera Unit with a towel or blanket.

Camera Unit and all its functions so that you are familiar with it

Camera Unit near a heat source.

Camera Unit that will provide the

：：：：：：：：

Important instructions:

• Read and Follow Instructions - Please read all the safety and operating

instructions before operating the product.

• Retain Instructions - The safety and operating instructions should be retained for future reference.

ENGLISH

Safety Instructions

• Heed Warnings - Comply with all warnings on the product and in the operating instructions.

• Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your location, consult your camera dealer or local power company.

• Overloading - Do not overload wall outlets or extension cords as this can result in the risk of re or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or re hazard. Periodically examine the cord, and if its appearance indicates damage or deteriorated insulation, have it replaced by your service technician.

• Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

• Surge Protectors - It is highly recommended that the camera equipment be connected to a surge protector. Doing so will protect the equipment from damage caused by power surges. Surge protectors should bear the CE approval mark.

• Uninterruptible Power Supplies (UPS) - Because this product is designed for continuous, 24/7 operation, it is recommended that you connect the product to an uninterruptible power supply. An uninterruptible power supply has an internal battery that will keep the product running in the event of a power outage. Uninterruptible power supplies should bear the CE approval mark. CAUTION: Maintain electrical safety. Power line operated equipment or accessories connected to this product should bear the CE approval mark on the accessory itself and should not be modied so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or re. If in doubt, contact qualied service personnel.

• Attachments - Do not use attachments unless recommended by the product manufacturer, as they may cause a hazard.

• Heat - The product should be located away from heat sources such as radiators, heat registers, stoves, or other products (including ampliers) that produce heat.

Safety Instructions

• Any mounting of the product should be according to the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer.

• Camera Extension Cables - Check the rating of your extension cable to verify its compliance prior to installation.

• Mounting - The cameras provided with this system should be mounted only as instructed in this guide or the instructions that came with your cameras.

• Camera Installation - Cameras are not intended for submersion in water. When installing cameras outdoors, installation in a sheltered area is recommended.

2. System Requirements

Web Portal

• Windows® 7

• Mac OS® 10.7

• Chrome™ 24

• Internet Explorer® 9

• Safari® 6

• Java™ 7

• Firefox® 18.0

• Adobe® Flash® Player 15.0

Android™ System

• Version 4.2 or above

iPhone®/iPad

• Version 7.0 or above

Wi-Fi

• At least 0.6 Mbps upload bandwidth per camera. Test your Internet speed at: http://www.speedtest.net/

iOS

requirements:

ENGLISH

System Requirements

3. Getting started - Connecting Devices

How does it work?

FOCUS72

FOCUS66S

Camera

When a user tries to access the Camera, our secure server authenticates the user’s identity and permits access to the Camera.

3.1 How to register your Camera to Hubble account

3.1.1 Setting Up the Camera

Via WIFI

Step 1: Connect the antenna with the connector on the rear surface of the camera.

Wi-Fi Router

Access your

Camera locally

Hubble Service

Pair button

View your Camera from any compatible device remotely

Getting started - Connecting Devices

Step 3: Press and hold the pair button for 3 seconds or more until both RED and GREEN LEDs blink together. Step 4: From the APP, press "+" camera to search for the Focus72, then follow the instructions from the APP.

Via LAN

Step 1: Connect the LAN cable to the camera's LAN socket and the other end to your router, and screw in the waterproof cover.

Step 2: Insert the power adapter connector into the camera's power socket and screw in the waterproof cover. Connect the power adaptor plug to a suitable mains socket and wait for the LED to start blinking RED. Step 3: Press and hold the pair button for 3 seconds or more until both RED and GREEN LEDs blink together. Step 4 : From the APP, press "+" camera to search for the Focus72, then follow the instructions from the APP.

3.1.2 Install your Camera

NOTE: We recommend you set up your camera with your router and make sure that the camera operates fully with your Wi-Fi / LAN in the location you are going to mount it, before you start to drill holes for the installation.

A. Drill the Screw Holes

• Mark the position on the wall using the camera base plate as a template, making sure the cable guide in the base plate is correctly aligned for the direction you want the camera wires to leave the mounting, unless you pass them directly through the wall behind the base plate.

• Drill 3 holes (4.5mm diameter) and hammer the expansion plugs (included) into the holes as needed.

• If you want to pass the camera wires through the wall behind the base plate, drill a 22mm diameter hole in the midpoint between the screw holes.

ENGLISH

Getting started - Connecting Devices

4.5m m

39.6 0 mm

45.7 3 mm

B. Fixing the Camera unit to the wall or ceiling

• Pass the camera wires through the cable guide of the base plate or through a hole in the wall or ceiling directly behind the base plate.

• Fasten the base plate on the wall or ceiling with the 3 screws provided.

• Make sure the unit is fixed firmly on the wall or ceiling.

C. Adjust angle and secure the camera unit

• Loos

en the tamper-proof screws with the wrench key (provided).

• Adjust the camera angles to give your required field of view, then tighten the tamper-proof screws.

D. Connecting LAN with the Camera Unit

• The LAN socket provides an option for you to connect directly via a LAN cable if necessary. Insert the LAN jack into the LAN socket through the water proof cover and fasten the cover, as shown.

Getting started - Connecting Devices

3.1.3 How to assemble the waterproof plug for the LAN cable

Ring

Step 1: Place the O-Ring washer over the end of the LAN socket.

Lan Socket

Step 2: Pass the LAN plug and cable through Part 1, the Rubber Gasket and Part 2 in the order shown below.

Part2

Part 1

Rubber gasket, please clasp it

around the cable and insert

Step 3: Connect the LAN plug into the LAN socket.

Step 4: Turn and lock Part 2 to the LAN socket.

Step 5: Make sure the Rubber Gasket is inserted into the rear of Part 2 and screw Part 1 to Part 2 to finalise the connection.

ENGLISH

NOTE

If the LAN is not being connected, t the waterproof blanking cap (provided) over the end of the camera's LAN socket.

Getting started - Connecting Devices

+ 23 hidden pages