Motorola DTR2450 User Manual 2
M
QUICK REFERENCE
DTR SERIES™ PORTABLE RADIO
ENGLISH
Antenna
Volume Controls
2450
Push-to-Talk (PTT)
Button
Menu Key
Speaker
Plug-in Charging
and Connect Data
Accessories
Audio Jack
Connect audio accessories
Option Keys
To select display options
Home Key
Use to exit the current
menu and return to the
idle screen
Power Button
Navigation Keys
Use to scroll menu
settings
Microphone
Programming
Your radio is ready to use after a fully-charged battery has been installed.
However, your radio should be programmed to ensure compatibility with existing
DTR Series radios and to fully utilize all features.
To enter Programming Mode:
1.Hold down and press the PTT button three times.
2.Press the Right .
3.Press .
4.Press the Left .
5.Hold down and press the PTT button three times.
Program Menu
Contacts
Text Messages
Settings
Select
Reset
Scroll List
Display
Contacts
Program
Menu
* DTR2450 only.
For further information, refer to your specific product User Guide included on the CD-ROM.
Text Messaging
Settings
VibraCall
Clock/Alarm
Volume
Ambient Noise
Advanced
Scan Lists
Call Forward
Radio History
Reset Defaults
Manager Mode*
See All Groups
Language
GETTING STARTED
1. INSTALL THE BATTERY
Push down on the latch at the top of the battery door and lift
ENGLISH
off the radio. Insert the battery, as shown, into the battery
compartment and press down to secure in place
2. CHARGE THE BATTERY
Connect the charger to the drop-in charging tray and insert
the radio. The battery meter on the radio display will stop
flashing when fully charged.
3. TURN THE RADIO ON
Press the Power Button (hold to turn off)
NOTE:Batteries are shipped uncharged from the factory. Always charge a new
battery to capacity before initial use, charge time is dependent upon
charger type.
SENDING A VOICE CALL
1. Turn the radio on and select the recipient(s) by either:
• Selecting from the scroll list, using the navigation keys
• Selecting from Contacts by pressing Menu and using the navigation keys
• Selecting from Recent Calls by pressing Menu then selecting Recent Calls
2. Press and hold the PTT button on the side of the radio
until the talk permit tone is received, then speak clearly
into the microphone. If “User Not Available” displays, the
recipient is either in another radio call, out of range, or
turned off. Try to connect again. When making a group
call, at least one member of the group must be available.
3. Release the PTT button to listen.
MAN WITH RADIO
RECEIVING A VOICE CALL
1. Turn radio on and set volume level.
2. Switch to desired Public Group using the navigation keys
3. When a Private or Group call is received, it will be heard at the volume level
you have set. Press the PTT to respond.
MOTOROLA, the Sylized M Logo, are registered in the
U.S. Patent and Trademark Office. All other product or
service names are the property of their respective
owners.
©Motorola, Inc. 2006. All rights reserved.
@6864243V01@
6864243V01 (EN)
Loading...