Page 1
Warning: Charge the cordless audio conferencing unit for 24 hours before
use.
Motorola AC1001C
Digital Cordless Audio
Conferencing Unit
Easy to use cordless
conferencing unit,
ideal for the home
or oice.
Page 2
Welcome...
to your new Motorola AC1001C Digital Cordless Audio Conferencing
Unit!
• Large speaker for quality sound.
• Full duplex for simultaneous talking.
• Dynamic noise reduction.
• Echo cancelling.
• Cordless audio conferencing unit for convenient and flexible positioning.
• 100 name and number phonebook.
• Bright backlit display.
• Copy phonebook entries between cordless units.
• All cordless units are fully cordless for locating anywhere within range.
• Screensaver clock display.
• Caller ID shows you who’s calling and see details of the last 30 callers in a Calls list.
1
• Redial up to 20 of the last numbers called.
• Register up to 4 cordless units to a single base and register each cordless unit with up
to 4 dierent bases.
• Make internal calls, transfer external calls, hold 3-way conversation between two
internal callers and an external caller.
• Choose from 20 dierent ringtones for internal and external calls as well as numbers
stored in the phonebook.
Need help?
If you have any problems setting up or using your AC1001C, please contact Customer
Services on 1800 2700 361. Alternatively, you may nd the answer in the ‘Help’ section
at the back of this guide.
1
You must subscribe to your network provider’s Caller ID service for this feature to
work. A subscription fee may be payable.
Page 3
This User Guide provides you with all the information you need to get the
most from your phone.
Before you make your rst call you will need to set up your phone. Follow
the simple instructions in ‘Getting Started’, on the next few pages.
IMPORTANT
Only use the telephone line cord supplied.
Please note that this equipment is not designed for making emergency telephone
calls when the power fails. Alternative arrangements should be made for access to
emergency services.
Got everything?
• AC1000C cordless audio conferencing unit
• AC1000C base
• 6 x AAA rechargeable Ni-MH battery pack
• Power adaptor for the base
• Telephone line cord
Page 4
4
1. Getting started ........................................................... 7
2. Getting to know your phone .................................... 10
3. Using the phone ...................................................... 15
3.1 Switch the conferencing unit on / o ............................................................15
3.2 Calls ...............................................................................................................15
3.2.1 Make a call ...........................................................................................15
3.2.2 Preparatory dialling .............................................................................15
3.2.3 Make a call using fast call keys ............................................................15
3.2.4 End a call .............................................................................................15
3.2.5 Receive a call ......................................................................................15
3.3 Adjust the speaker volume ............................................................................16
3.4 Mute ...............................................................................................................16
3.5 Intercom.........................................................................................................16
3.5.1 Make an internal call ...........................................................................16
3.5.2 Receive an internal call .......................................................................16
3.5.3 Transfer a call .......................................................................................16
3.5.4 3-way conference call .........................................................................17
3.6 Redial .............................................................................................................17
3.6.1 Dial an entry ........................................................................................17
3.6.2 Copy a Redial list number to the phonebook ....................................17
3.6.3 Delete an entry ....................................................................................18
3.7 Lock / unlock the keypad ..............................................................................18
3.8 Paging / Find conferencing unit ...................................................................18
4. Phonebook ............................................................... 19
4.1 Store a name and number .............................................................................19
4.2 View the details or dial an entry .....................................................................20
4.3 Search an entry ..............................................................................................21
4.4 Edit a name and number ...............................................................................21
4.5 Copy an entry to another conferencing unit ................................................21
4.6 Assign a ringtone ...........................................................................................22
4.7 Delete an entry ..............................................................................................22
4.8 Store a fast call number .................................................................................22
4.9 Clear a fast call number .................................................................................22
4.10 Access the phonebook during a call .............................................................23
4.11 Copy the phonebook to another cordless unit .............................................23
4.12 Check the memory status .............................................................................23
4.13 Delete all entries ............................................................................................23
Page 5
5
5. Calls list ..................................................................... 24
5.1 New calls alert ................................................................................................24
5.2 Dial a number in the Calls list ........................................................................24
5.3 View the details of an entry ............................................................................25
5.4 Copy a Calls list number to the phonebook .................................................25
5.5 Delete an entry ..............................................................................................25
5.6 Delete the entire Calls list ..............................................................................26
7. Clock ........................................................................ 27
7.1 Set the date and time.....................................................................................27
7.2 Time format ....................................................................................................27
8. Conferencing unit settings ...................................... 28
8.1 Ringtone ........................................................................................................28
8.2 Ringer volume ................................................................................................28
8.3 Speaker volume .............................................................................................28
8.4 Name ..............................................................................................................29
8.5 Display language ...........................................................................................29
8.6 Screensaver ...................................................................................................29
8.7 Light timeout..................................................................................................29
8.8 Auto talk .........................................................................................................29
8.9 Key beep ........................................................................................................30
8.10 PABX access code .........................................................................................30
9. Base settings ............................................................. 31
9.1 Dialling mode ................................................................................................31
9.2 Ring priority ...................................................................................................31
9.3 Recall mode ...................................................................................................31
9.4 First ring .........................................................................................................32
9.5 Change the System PIN ................................................................................32
9.6 Restore default settings .................................................................................32
9.7 Default settings .............................................................................................. 33
10. Using additional cordless units ................................. 34
10.1 Registering an additional cordless unit .........................................................34
10.2 Register a dierent make of cordless unit to your AC1001C base ...............34
10.3 Select a base ..................................................................................................35
10.4 De-register a cordless unit .............................................................................35
Page 6
6
11. Help ........................................................................... 36
12. General information ................................................. 38
Page 7
7Getting started
1. Getting started
IMPORTANT
Do not place your AC1001C in the bathroom or other humid areas.
Location
You need to place your AC1001C base within 1.5 metres of the mains power socket and
telephone wall socket so that the cables will reach. The socket-outlet shall be installed near
the equipment and shall be easily accessible.
Make sure that it is at least 1 metre away from other electrical appliances to avoid
interference. Your AC1001C works by sending radio signals between the conferencing
unit and base. The strength of the signal depends on where you place the base. Placing it
as high as possible ensures the best signal.
HANDSET RANGE
The unit has a range of up to 300 metres outdoors when there is a clear line of sight between
the base and conferencing unit. Any obstruction between the base and conferencing unit
will reduce the range signicantly. With the base indoors and the conferencing unit either
indoors or outdoors, the range will normally be up to 50 metres. Thick concrete and stone
walls can severely aect the range.
SIGNAL STRENGTH
The icon on your conferencing unit indicates that you are within range of the base.
When out of range of the base,
Searching
will be displayed and the icon flashes. If you
are on a call, you will hear a warning beep.
The line will hang up if the conferencing unit moves out of range of the base. Move closer
to the base, the conferencing unit will automatically reconnect to the base.
Setting up
IMPORTANT
The base station must be plugged into the mains power at all times. Use only the power
adaptor and telephone line cord supplied with the product.
Connecting the base
Page 8
8 Getting started
1. Plug the telephone line cord into the socket marked on the rear of the base.
2. Plug the power adaptor into the socket marked on the rear of the base and plug the
other end into the mains power wall socket. Switch on the mains power.
Installing and charging the conferencing unit
1. Remove the battery cover from the back of the conferencing unit and plug in the
rechargeable Ni-MH battery pack supplied.
2. Clip the battery cover back into place.
3. If you are charging the batteries for the rst time, place the conferencing unit on the
base to charge for at least 16 hours continuously.
4. When the conferencing unit is fully charged, icon will appear steady on the
display. Plug the other end of the telephone line cord (make sure that one end is
already plugged into the base) into the telephone wall socket.
IMPORTANT
Warning! Use only the approved rechargeable Ni-MH battery pack (1500mAh Ni-MH
rechargeable battery pack) supplied with your AC1001C.
BATTERY LOW WARNING
If icon is displayed on the screen, you must charge the conferencing unit before use
it again.
When charging, icon will scroll on the display.
BATTERY PERFORMANCE
In ideal conditions, fully charged batteries should give up to 7 hours talk time or up to 72
hours standby time on a single charge.
1
Note that new batteries do not reach their full capacity until they have been put to normal
use for several days.
To keep your batteries in the best condition, leave the conferencing unit o the base for a
few hours at a time.
Running the batteries right down at least once a week will help them last as long as
possible.
The charge capacity of rechargeable batteries will reduce with time as they wear out,
giving the conferencing unit less talk / standby time. Eventually they will need to be
replaced.
After charging your conferencing unit for the rst time, subsequent charging time is about
6–8 hours a day. Batteries and conferencing unit may become warm during charging.
This is normal.
1
All talk and standby times are approximate and depend on features selected and usage
pattern.
Page 9
9Getting started
Date and time
If you have subscribed to a Caller ID Service, the date and time is set automatically for all
cordless units when you receive your rst call.
If you do not have a Caller ID service, you can set the date and time manually.
1. Press
Menu
, scroll d to
Date & Time
and press
Select
.
2.
Set
is highlighted. Press
Select
.
3. Enter the date using the format YY/MM/DD e.g. 16/08/04 for 4 August 2016 and press
Save
.
4. Enter the time (HH:MM) and press
Save
.
If the current time format setting is 12 hour, scroll u or
d
to select
am
or pm.
5. Press e to return to standby.
Your AC1001C is now ready for use.
Page 10
10 Getting to know your phone
2. Getting to know your phone
Overview of your conferencing unit
A Speaker
B Display
See page 12 for an overview of the display icons.
C Talk
Make or answer a call.
D Menu / OK / Left softkey
In standby mode, press to open the Menu.
Press to select menu options and to conrm a displayed option.
A
B
C
D
E
F
G
H
M
L
K
I
J
Page 11
11Getting to know your phone
E Redial list / Scroll up / Volume up / Pause
In standby mode, press to open the redial list.
Scroll up through lists and menus.
During a call, press to increase the earpiece and hands-free volume.
When the phone is ringing, press to increase the conferencing unit ringer volume.
Press and hold to enter a pause (P) when pre-dialling or storing numbers.
F Calls list / Scroll Down / Volume down / Intercom
Open the call list.
Scroll down through lists and menus.
During a call, press to decrease the earpiece and hands-free volume.
When the phone is ringing, press to decrease the conferencing unit ringer volume.
Press and hold to make an internal call.
G * / Ringer o
Dial a *.
In standby, press and hold to switch handset ringer on or o.
H End / Exit / Switch conferencing unit on/o
End a call.
When in a menu, go back to standby mode.
Press and hold to switch conferencing unit o (when in standby) or on.
I Phonebook menu / Clear / Back / Right softkey
In standby mode, press to open the phonebook menu.
Clear incorrect input during text editing.
Return to previous menu.
J Recall
Use recall (R) functions.
K Mute with LED indicator
During a call, press to turn mute on / o.
L Change case / Keypad lock / #
Press to change the case when entering letters / editing.
Press and hold to lock the keypad.
Dial a #.
M Microphone
Page 12
12 Getting to know your phone
Conferencing unit LCD Display
Steady when the conferencing unit is registered and within
range of the base. Flashes when the conferencing unit is out of
range or searching for base.
Conferencing unit ringer is o.
Keypad is locked.
You have a voicemail message.
1
You have missed calls.
2
The approximate power levels of your battery are indicated as below:
The battery is fully charged.
Battery is partially charged.
The battery is low.
The battery is almost empty.
1
This feature is dependent on your Network Service provider supporting the service. A
subscription fee may be payable..
2
For this feature to work, you must subscribe to Caller ID Service from your network
operator. A subscription fee may be payable.
Page 13
13Getting to know your phone
Overview of the base
A Page
In standby, press to ring the cordless unit(s).
Press and hold to enter registration mode when registering cordless units.
Navigating the menu
Your AC1001C has an easy to use menu system on the conferencing unit.
Each menu has a list of options, which you can see on the menu map on the following
page.
When the conferencing unit is in standby:
1. Press the left softkey
Menu
. The main menu is opened.
2. Then use u or d buttons to scroll through the menu.
3. Soft key options
Select
and
Back
are displayed.
Press the left softkey
Select
to open a sub-menu or validate an option.
Press the right softkey
Back
to go back to the previous menu level, correct a character
or cancel an action.
NOTE
If no buttons are pressed for 30 seconds or the conferencing unit is placed on the base, the
conferencing unit returns to standby.
A
Page 14
14 Getting to know your phone
Menu map
Calls Lists
Missed Calls
Received Calls
Dialled Calls
Delete Calls
Date & Time
Set
Time Format
Settings
Set Handset
Ringtone
Ringer Volume
Handfree Volume
Handset Name
Screensaver
Light Timeout
Auto Talk
Key Beep
PABX Access Code
Set Base
Dialling Mode
Ring Priority
Recall Mode
First Ring
System PIN
Master Reset
Registration
Register Handset
Select Base
De-register
Names
From menu in standby:
Search
Add Entry
Copy Phonebook
Memory Status
Delete Phonebook
Once in the phonebook
list press
Options
.
Show Details
Edit Entry
Copy Entry
Ringtone
Delete Entry
Fast Call
Press Names during
a call
Phonebook list is
displayed, select
Options
:
Add Entry
Show Details
Edit Entry
Delete Entry
Page 15
15Using the phone
3. Using the phone
NOTE
Your conferencing unit will automatically time the duration of all external calls, the call
timer will display on the screen. When the call ends, the total duration of your talk time is
shown for 5 seconds.
3.1 Switch the conferencing unit on / o
Press and hold e to switch the conferencing unit on or o.
3.2 Calls
3.2.1 Make a call
1. Press t.
2. When you hear the dial tone, dial the number.
3.2.2 Preparatory dialling
1. Dial the number rst. If you make a mistake press
Clear
to delete the last digit.
2. Press t, to dial the number.
NOTE
To enter a pause (P) when pre-dialling, see page 19.
3.2.3 Make a call using fast call keys
1. Press and hold the relevant keypad number to dial the pre-stored number directly.
NOTE
To store a fast call number, see page 23.
3.2.4 End a call
Press e, or place the conferencing unit back on the base.
3.2.5 Receive a call
When you receive an external call, the phone rings and
External Call
shows on the display.
1. If the conferencing unit is o the base then press t to answer the call, or if the
conferencing unit is on the base simply lift the conferencing unit to answer the call.
NOTE
If you prefer to press t when you lift up the conferencing unit to answer a call, you will
need to switch Auto Talk o, see page 33.
Page 16
16 Using the phone
3.3 Adjust the speaker volume
During a call:
Press u or d to increase or decrease the volume. There are 8 levels to choose from.
From standby:
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll d to
Handfree Volume
and press
Select
.
4. Scroll u or d to adjust the receiver volume level and press
Save
.
5. Press e to return to standby.
3.4 Mute
You can mute your conferencing unit so that you can talk to someone nearby without your
caller hearing.
1. During a call, press m. The display shows
Secrecy On
, the LED lights up and your caller
cannot hear you.
2. Press m again to resume your call.
3.5 Intercom
3.5.1 Make an internal call
If you have more than one unit registered to the base, you can make internal calls between
two units.
Internal Call
and
Handset X
displays to indicate an internal call.
1. Press and hold d followed by the number (1-4) of the unit you want to call.
2. Press OK.
3.5.2 Receive an internal call
When you receive an internal call,
Internal Call
and
Handset X
is displayed.
1. Press t to answer the call.
3.5.3 Transfer a call
You can transfer an external call to another unit registered to the base.
During an external call:
1. Press and hold d followed by the number (1-4) of the unit you want to transfer to.
2. Press OK.
3. When the unit answers, press e or
End
to complete the transfer.
NOTE
If there is no answer from the other conferencing unit and you wish to return to your
external caller, press and hold d.
Page 17
17Using the phone
3.5.4 3-way conference call
You can hold a 3-way conference call between 2 internal callers and 1 external caller.
During a call with an external caller:
1. Press and hold d followed by the number (1-4) that you want to establish a conference
call.
2. Press OK.
3. When the other unit answers, press
Join
to connect all three callers to begin the
conference call.
4. If there is no answer from the other unit, press and hold d to return to your external
caller.
5. Press e to end the call.
3.6 Redial
The last 20 entries dialled are stored in the redial list.
3.6.1 Dial an entry
1. Press u to open the Redial list.
2. The last number dialled is highlighted.
3. Scroll u or d to the entry you want to call.
4. Press t to dial the entry or press
Back
to return to standby.
NOTE
If the caller’s number exactly matches an entry stored in the phonebook, the name is
displayed. Press twice to see the caller’s number and then press d to see the date
and time of the call.
3.6.2 Copy a Redial list number to the phonebook
1. Press u to open the Redial list.
2. Scroll u or d to the entry you want.
3. Press
Options. Show Details
is highlighted. Scroll d to
Save Number
.
4. Press
Select
. The display shows
Enter Name:
.
5. Enter the name and press OK. The number is displayed.
6. Edit the number if necessary, then press
Save
.
7. Press u or d to select the ringer melody you want and press
Select
. The number is
stored.
8. Press e to return to standby.
NOTE
See “ENTERING NAMES” and “WRITING TIPS” on page 20.
Page 18
18 Using the phone
3.6.3 Delete an entry
1. Press u to open the Redial list.
2. Scroll u or d to the entry you want and press
Options
. The display shows
Show Details
.
3. Scroll d to
Delete Call
.
4. Press
Select
to conrm or e to cancel.
3.7 Lock / unlock the keypad
You can lock the keypad so that it cannot be operated accidentally while carrying it
around.
NOTE
When the keypad is locked, you can still answer incoming calls and operate the
conferencing unit as normal. When the call ends, the keypad lock comes on again.
1. Press and hold h.
icon is displayed.
2. To unlock the keypad, press
Unlock
. The display shows
Press # to Unlock Keys
.
3. Press h within 3 seconds.
3.8 Paging / Find conferencing unit
You can alert a conferencing unit user that they are wanted or locate a missing
conferencing unit.
Paging calls cannot be answered by a conferencing unit.
1. Press p on the underside of the base. All units registered to the base will ring and display
Paging Call
.
2. To stop the ringing, press p on the base again or press
Stop
or any button on the
conferencing unit.
Page 19
19Phonebook
4. Phonebook
You can store up to 100 names and numbers in the phonebook. Names can be up to 12
characters long and numbers up to 24 digits. You can also select dierent ringer melodies
for the phonebook entries.
4.1 Store a name and number
If the AC1001C is connected to a switchboard, you may need to enter a pause in a
number. This gives the switchboard time to nd an outside line. A pause is normally stored
after the switchboard access code (e.g. 9). When storing a number, press and hold u until
the display shows P. You can then continue storing the phone number.
If you have subscribed to Caller ID Service and wish to display the name of your caller
instead of the number, save the full telephone number including the area code to your
phonebook.
You can store multiple entries with the same name. However, to prevent unnecessary
duplicated entries, you can only store the same number once.
1. Press
Names
to enter the phonebook menu.
2.
Search
is highlighted.
3. Scroll d to
Add Entry
and press
Select
.
4. Enter a name and press OK.
5. Enter a number and press
Save
.
6. Scroll u or d to the melody you want and press
Select
. The entry is stored.
7. Press e to return to standby.
NOTE
Cancel storing an entry by pressing e at any time during the process.
ENTERING NAMES
Use the alphanumeric keypad to enter names in the phonebook.
For instance to enter the name Paul
P Press 7 once
A Press 2 once
U Press 8 twice
L Press 5 three times
To enter a space, press 0.
WRITING TIPS
Press u or d to move between characters/digits.
Press
Clear
to delete a character, or press and hold
Clear
to delete all characters.
Page 20
20 Phonebook
CHARACTER MAP
Key Case Assigned characters and symbols
1
L / U . , - ? ! ’ @ : ; / 1
2
L a b c 2
U A B C 2
3
L d e f 3
U D E F 3
4
L g h i 4
U G H I 4
5
L j k l 5
U J K L 5
6
L m n o 6
U M N O 6
7
L p q r s 7
U P Q R S 7
8
L t u v 8
U T U V 8
9
L w x y z 9
U W X Y Z 9
0
L / U Space 0
#
L / U
Short press to switch between Abc, abc, ABC and 123
mode
L = Lower case
U = Upper case
4.2 View the details or dial an entry
1. Press
Names
to enter the phonebook menu.
2.
Search
is highlighted. Press
Select
. The rst entry is highlighted on the display.
3. Scroll u or d to the entry you want.
Or
To search alphabetically, press the key with the rst letter of the name, e.g. if the name
begins with N, press 6 twice. The display shows the rst entry beginning with N. If
required, scroll u or d to the exact entry.
3. Press t to dial the displayed entry.
Or
Page 21
21Phonebook
To see the details, press
Options
.
4.
Show Details
is highlighted. Press
Select
. The name, number and ringtone of the entry
are displayed.
5. Press t or
Dial
to dial the displayed entry or press e to return to standby.
4.3 Search an entry
1. Press
Names
to enter the phonebook menu.
2.
Search
is highlighted. Press
Select
. The rst entry is highlighted on the display.
3. Enter the rst letter of the name to search alphabetically then scroll u or d to the exact
entry.
4. Press t to dial the displayed entry or press e to return to standby.
4.4 Edit a name and number
1. Press
Names
to enter the phonebook menu.
1.
Search
is highlighted. Press
Select
. The rst entry is highlighted on the display.
2. Enter the rst letter of the name to search alphabetically then scroll u or d to the exact
entry. Press
Options
.
3. Scroll d to
Edit Entry
and press
Select
.
4. Edit the name and press OK to conrm. Press
Clear
to delete a character, or press and
hold
Clear
to delete all characters.
5. Edit the number and press
Save
. Press
Clear
to delete a character, or press and hold
Clear
to delete all characters.
6. Scroll u or d to the ringtone you want and press
Select
. The entry is stored.
7. Press e to return to standby.
4.5 Copy an entry to another conferencing unit
1. Press
Names
to enter the phonebook menu.
1.
Search
is highlighted. Press
Select
. The rst entry is highlighted on the display.
2. Enter the rst letter of the name to search alphabetically then scroll u or d to the exact
entry. Press
Options
.
3. Scroll d to
Copy Entry
and press
Select
.
4. The display shows
To Handset
, press
Select
.
5. Scroll u or d to the number of the cordless unit you want the entry to be copied to.
Press
Select
.
6. When the message “
Copy Phonebook?
” appears on the destination cordless unit, press
Ye s
on that cordless unit to start the copy process.
Page 22
22 Phonebook
7. Press e to return to standby.
NOTE
If an entry with the same number is already stored in the receiving cordless unit, it will not
be copied.
4.6 Assign a ringtone
1. Press
Names
to enter the phonebook menu.
1.
Search
is highlighted. Press
Select
. The rst entry is highlighted on the display.
2. Enter the rst letter of the name to search alphabetically then scroll u or d to the exact
entry. Press
Options
.
3. Scroll d to
Ringtone
and press
Select
.
4. Scroll u or d to the ringtone you want and press
Select
.
The ringtone is saved.
5. Press e to return to standby.
4.7 Delete an entry
1. Press
Names
to enter the phonebook menu.
1.
Search
is highlighted. Press
Select
. The rst entry is highlighted on the display.
2. Enter the rst letter of the name to search alphabetically then scroll u or d to the exact
entry. Press
Options
.
3. Scroll d to
Delete Entry
and press
Select
.
4. Display shows
Delete <Name>?
. Press
Ye s
to conrm.
5. Press e to return to standby.
4.8 Store a fast call number
1. Press
Names
to enter the phonebook menu.
2.
Search
is highlighted. Press
Select
. The rst entry is highlighted on the display.
3. Enter the rst letter of the name to search alphabetically then scroll u or d to the exact
entry, then press
Options
.
4. Scroll u or d to
Fast Call
, press
Select
to conrm.
5. Scroll u or d to
Key X
where the entry will be stored, press
Select
.
6.
Assign
is highlighted press
Select
to conrm.
7. Press e to return to standby.
4.9 Clear a fast call number
1. Press
Names
to enter the phonebook menu.
2.
Search
is highlighted. Press
Select
. The rst entry is highlighted on the display.
Page 23
23Phonebook
3. Enter the rst letter of the name to search alphabetically then scroll u or d to the exact
entry, then press
Options
.
4. Scroll u or d to
Fast Call
, press
Select
.
5. Scroll u or d to
Key X
where the entry is stored, press
Select
.
6. Scroll d to
Clear Entry
, press
Select
to conrm.
7. Press e to return to standby.
4.10 Access the phonebook during a call
1. During a call, press
Names
.
2. Press
Options
and scroll u or d to select
Add Entry, Show Details, Edit Entry
or
Delete
Entry
.
4.11 Copy the phonebook to another cordless unit
1. Press
Names
to enter the phonebook menu.
2. Scroll d to
Copy Phonebook
and press
Select
.
3. The display shows
To Handset
, press
Select
.
4. Scroll u or d to the number of the cordless unit you want the phonebook to be copied
to. Press
Select
.
5. When the message “
Copy Phonebook?
” appears on the destination cordless unit, press
Ye s
on that cordless unit to start the copy process.
6. Press e to return to standby.
NOTE
If an entry with the same number is already stored in the receiving cordless unit, it will not
be copied.
4.12 Check the memory status
You can check how much phonebook memory you have on your phone.
1. Press
Names
to enter the phonebook menu.
2. Scroll d to
Memory Status
and press
Select
. The display shows the number of used and
free phonebook entries.
3. Press e to return to standby.
4.13 Delete all entries
1. Press
Names
to enter the phonebook menu.
2. Scroll d to
Delete Phonebook
and press
Select
.
3. Display shows
Delete All Entries ?
. Press
Ye s
.
4. Press e to return to standby.
Page 24
24 Calls list
5. Calls list
If you have subscribed to Caller ID service, and provided the identity of the caller is not
withheld, the number of the caller will be displayed together with the date and time of the
call (if provided by the network).
NOTES
If the caller’s number is stored in your phonebook along with a name, the name will also
be displayed.
If the number is unavailable,
Unavailable
will be displayed.
If the caller has withheld their number,
Withheld
will be displayed.
If the call is from an international number,
International
will be displayed.
If the call is from the operator,
Operator
will be displayed.
If the call is from a payphone,
Payphone
will be displayed.
If the call is from a ringback request,
Ringback
will be displayed.
Information about incoming calls is dependent on the country and network operator.
Some operators may charge a subscription for their Caller ID service.
The Calls list contains details of missed and received call. Details include the date and
time of the call. Entries are displayed in chronological order with the most recent call at
the top of the list.
When the list is full, and a new call is received, the oldest entry will be deleted
automatically.
The received and missed Calls list holds details of up to 30 calls.
If you receive more than one call from the same number, only the most recent call is kept
in the Calls list.
5.1 New calls alert
When you have new missed calls (incoming calls that you haven’t answered), the display
shows
You have X new missed call (s)
.
If you press
Back
, the screen returns to standby and the icon is displayed.
Or press
View
to see details of the call.
5.2 Dial a number in the Calls list
1. Press
Menu
, the display shows
Calls Lists
, press
Select
.
2. Scroll u or d to highlight the Calls list (
Missed Calls, Received Calls, Dialled Calls
) you
want.
3. Press
Select
to conrm. The most recent number or name if stored in the phonebook
is displayed.
4. Scroll u or d to the entry you want.
5. Press t to dial the number.
Page 25
25Calls list
5.3 View the details of an entry
1. Press
Menu
, the display shows
Calls Lists
, press
Select
.
2. Scroll u or d to highlight the Calls list (
Missed Calls, Received Calls, Dialled Calls
) you
want.
3. Press
Select
to conrm. The most recent number or name if stored in the phonebook
is displayed.
4. Scroll u or d to the entry you want and press
Options
.
5. Display shows
Show Details
. Press
Select
. The number (or name if stored in the
phonebook) is displayed, scroll d to see the date and time of the call.
6. Press e to return to standby.
5.4 Copy a Calls list number to the phonebook
1. Press
Menu
, the display shows
Calls Lists
, press
Select
.
2. Scroll u or d to highlight the Calls list (
Missed Calls, Received Calls, Dialled Calls
) you
want.
3. Press
Select
to conrm. The most recent number or name if stored in the phonebook
is displayed.
4. Scroll u or d to the entry you want and press
Options
.
5. Scroll d to
Save Number
and press
Select
.
6. Enter a name and press OK.
7. Display shows the number of the call. Edit the number if necessary and press
Save
.
Press
Clear
to delete a character, or press and hold
Clear
to delete all characters.
8. Scroll u or d to the melody you want and press
Select
. The entry is stored.
9. Press e to return to standby.
5.5 Delete an entry
1. Press
Menu
, the display shows
Calls Lists
, press
Select
.
2. Scroll u or d to highlight the Calls list (
Missed Calls, Received Calls, Dialled Calls
) you
want.
3. Press
Select
to conrm. The most recent number (or name if stored in the phonebook)
is displayed.
4. Scroll u or d to the entry you want and press
Options
.
5. Scroll d to
Delete Call
and press
Select
. The call is deleted.
6. Press e to return to standby.
Page 26
26 Calls list
5.6 Delete the entire Calls list
1. Press
Menu
, the display shows
Calls Lists
, press
Select
.
2. Scroll d to
Delete Calls
and press
Select
.
3. Scroll u or d to highlight the Calls list (
Missed Calls, Received Calls, Dialled Calls
or
All
Calls
) you want.
4. Display shows
Delete All Calls ?
. Press
Ye s
to conrm.
5. Press e to return to standby.
Page 27
27Clock
7. Clock
If you have subscribed to your network’s Caller ID service, the base automatically sets the
date and time of all cordless units when you receive the rst call. You can also manually set
the time on the individual conferencing units.
7.1 Set the date and time
1. Press
Menu
, scroll d to
Date & Time
and press
Select
.
2.
Set
is highlighted. Press
Select
.
3. Enter the date using the format YY/MM/DD e.g. 16/08/04 for 4 August 2016 and press
Save
.
4. Enter the time (HH:MM) and press
Save
.
If the current time format setting is 12 hour, select am or pm.
5. Press e to return to standby.
7.2 Time format
1. Press
Menu
, scroll d to
Date & Time
and press
Select
.
2. Scroll d to
Time Format
and press
Select
.
3. Scroll u or d to
12 Hour
or
24 Hour
and press
Select
.
4. Press e to return to standby.
Page 28
28 Cordless unit settings
8. Conferencing unit settings
8.1 Ringtone
You can set dierent ringtones for external calls and internal calls.
Select from 20 ringtones.
You will hear a sample ring as you scroll to each ringtone.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3.
Ringtone
is highlighted. Press
Select
.
4. Scroll u or d to
External Call
or
Internal Call
and press
Select
.
5. Scroll u or d to the ringtone that you want and press
Select
.
6. Press e to return to standby.
8.2 Ringer volume
The conferencing unit has 5 ringer volume settings plus O.
If the volume is set to O, is displayed.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll d to
Ringer Volume
and press
Select
.
4. Scroll u or d to adjust the ringer volume level and press
Save
.
5. Press e to return to standby.
NOTE
When the phone is ringing, you may press
Silence
to silent the ringer for that call.
8.3 Speaker volume
This sets the standard volume level for the conferencing units speaker. There are 8 levels
to choose from.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll d to
Handfree Volume
and press
Select
.
4. Scroll u or d to adjust the receiver volume level and press
Save
.
5. Press e to return to standby.
Page 29
29Cordless unit settings
8.4 Name
If you are using more than one cordless unit with the AC1001C base, you can give each
cordless unit a personalised name to easily distinguish between cordless units.
A name can be up to 10 characters long.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll d to
Handset Name
and press
Select
.
4. Enter the name and press OK. Press
Clear
to delete a character, or press and hold
Clear
to delete all characters.
5. Press e to return to standby.
8.5 Display language
The display language for this model is English only and cannot be updated.
8.6 Screensaver
When the screensaver is set to Clock, an analogue clock is displayed.
The screensaver comes on when the screen backlight switches o in standby. To change
the backlight timeout setting, see “Light timeout” in the next section.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll d to
Screensaver
and press
Select
.
4. Scroll u or d to
Clock
or O then press
Select
.
5. Press e to return to standby.
8.7 Light timeout
Set the duration of the backlight after the conferencing unit’s display returns to standby
screen.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll d to
Light Timeout
and press
Select
.
4. Scroll u or d to set the timeout period you want, choose from either 15, 30 or
45
Seconds
and press
Select
.
5. Press e to return to standby.
8.8 Auto talk
With Auto Talk switched on, you can answer a call just by lifting the conferencing unit o
the base. If switched o, you will have to press t to answer a call.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
Page 30
30 Cordless unit settings
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll d to
Auto Talk
and press
Select
.
4. Scroll u or d to O or On then press
Select
.
5. Press e to return to standby.
8.9 Key beep
When you press a button on the conferencing unit, you will hear a beep. You can switch it
on or o.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll d to
Key Beep
and press
Select
.
4. Scroll u or d to O or On then press
Select
.
5. Press e to return to standby.
8.10 PABX access code
If the AC1001C is connected to a switchboard, you may need to enter a one-digit access
code in the dialling sequence to be able to connect to the outside line.
The access code will be displayed at the beginning of a number on the screen. The code
can be up to 4 digits long.
The access code will not be used when you dial the number manually (such as when you
are not dialling from the phonebook). This allows you to make calls to other switchboard
extensions.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll d to
PABX Access Code
and press
Select
.
4. Scroll u or d to O, On or
Set Code
then press
Select
.
If you select
Set Code
, enter the switchboard access code e.g. 9 then press
Save
.
5. Press e to return to standby.
Page 31
31Base settings
9. Base settings
9.1 Dialling mode
The AC1001C is preset to Tone dialling. It is unlikely that you need to change this setting.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2. Scroll d to
Set Base
and press
Select
.
3.
Dialling Mode
is highlighted. Press
Select
.
4. Scroll u or d to
Pulse
or
Tone
and press
Select
.
5. Press e to return to standby.
9.2 Ring priority
When you have more than cordless unit registered to your base, you can set one cordless
unit to ring before the other cordless units. This allows one cordless unit user to answer all
incoming calls rst, for example, the receptionist.
Choose
All Handsets
if you want all cordless units to ring at the same time or
Select Handset
to nominate one cordless unit to ring before the others.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2. Scroll d to
Set Base
and press
Select
.
3. Scroll d to
Ring Priority
and press
Select
.
4. Scroll u or d to
All Handsets
or
Select Handset
then press
Select
.
If you choose
Select Handset
, all available cordless units are displayed.
• Scroll
u
or d to the cordless unit you want then press
Select
.
• Scroll
u
or d to the number of rings that you want to set: 2, 4 or
6 Rings
and press
Select
.
5. Press e to return to standby.
9.3 Recall mode
Recall is useful to access certain network services and PABX / switchboard services.
The default recall mode preset in the AC1001C is suitable for your country network and
therefore you should not need to change it.
NOTE
The use of the AC1001C cannot be guaranteed on all PABX.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2. Scroll d to
Set Base
and press
Select
.
3. Scroll d to
Recall Mode
and press
Select
.
4. Scroll u or d to
Recall 1
or
Recall 2
and press
Select
.
5. Press e to return to standby.
Page 32
32 Base settings
9.4 First ring
Your AC1001C will automatically detect the Caller identication (Subscription
dependent). If you do not wish to hear the ring before the caller identication is displayed
you can manually set
First Ring
to O. The default setting is O.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2. Scroll d to
Set Base
and press
Select
.
3. Scroll d to
First Ring
and press
Select
.
4. Scroll u or d to O or On then press
Select
.
5. Press e to return to standby.
9.5 Change the System PIN
The System PIN is required when changing certain settings and for registration / deregistration. The default setting is 0000. You can change this to your own preferred number
(up to 8 digits).
When you enter a PIN, the digits are shown as
****
.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2. Scroll d to
Set Base
and press
Select
.
3. Scroll d to
System PIN
and press
Select
.
4. Enter the old PIN (Default setting = 0000) and press OK.
5. Enter the new PIN and press OK.
6. Re-enter the new PIN and press OK.
7. Press e to return to standby.
NOTE
It is advisable to make a note of your new PIN code and keep it somewhere safe.
9.6 Restore default settings
You can restore the AC1001C to its default (original) settings. Resetting the AC1001C will
not aect the phonebook or Calls list, and all cordless units registered to the base will be
retained. Only the cordless unit and base settings will be reset.
1. Press
Menu
, scroll d to
Settings
and press
Select
.
2. Scroll d to
Set Base
and press
Select
.
3. Scroll d to
Master Reset
and press
Select
.
4. Select
Ye s
to conrm or No to cancel.
5. Enter the System PIN (Default setting = 0000) then press OK. The display will show
Reset Complete
and the conferencing unit will restart automatically.
Page 33
33Base settings
9.7 Default settings
Conferencing unit Name Handset
Auto talk On
Ringer melody (EXT) Melody 3
Ringer melody (INT) Melody 1
Ringer volume 3
Speaker volume 2
Phonebook Unchanged
Call list Unchanged
Redial list Unchanged
Recall Mode Recall 1 (300ms)
Master PIN 0000
Clock Unchanged
Dial mode Tone
Page 34
34 Using additional cordless units
10. Using additional cordless units
Up to 4 cordless units can be registered to one base station. Additional cordless units must
be registered to the base before you can use them.
• The instructions described below apply specically to the AC1001C cordless unit. If
you wish to register another manufacturer’s cordless unit, the instructions may vary. In
this case, please refer to the instruction manual of the additional cordless unit.
• The System PIN is required to register or unregister cordless units. The default PIN is
0000.
10.1 Registering an additional cordless unit
NOTE
Cordless unit batteries must be fully charged before you start to register. Hold your
cordless unit close to the base during the registration process. Cordless units that were
supplied with your AC1001C base are already preregistered.
On the base:
1. Press and hold p for 5 seconds. The base will remain in registration mode for 90
seconds.
On the cordless unit:
1. Press
Menu
, scroll d to
Registration
and press
Select
.
2.
Register Handset
is highlighted. Press
Select
.
3. Bases are displayed. If necessary, scroll u or d to a new base you wish to register the
AC1001C cordless unit to and press
Select
.
4. Enter the system PIN and press OK.
5. The display shows
Searching Base X...
.
6. When registration is successful the display shows
Handset Registered
and you hear a
conrmation beep.
NOTE
If registration is not successful the rst time, please repeat the process again in case the
base registration period ran out of time. If the base is not found after a few seconds, the
cordless unit returns to standby. Try registering again.
If there are already 4 cordless units registered to the base, registration will fail. You must
de-register a cordless unit before you can register a new one.
10.2 Register a dierent make of cordless unit to your AC1001C base
IMPORTANT
DECT GAP Prole only guarantees that basic calling functions will work correctly between
dierent makes / types of cordless unit and base. There is a possibility that certain
features such as Caller ID will not work correctly.
Page 35
35Using additional cordless units
On the base:
1. Press and hold p for 5 seconds. The base will remain in registration mode for 90
seconds.
On the cordless unit:
Follow the registration instructions given in your cordless unit’s user guide.
10.3 Select a base
You can register the AC1001C conferencing unit with up to 4 bases. Once registered, you
can switch between bases, for example, bases at home and at work.
1. Press
Menu
, scroll d to
Registration
and press
Select
.
2. Scroll d to
Select Base
and press
Select
.
All the base numbers are displayed.
(In use)
is shown beside the base number where the conferencing unit was previously
registered to. Scroll u or d to the base you want and press
Select
.
3. The display shows
Searching Base X...
. When registration is complete, the
conferencing unit returns to standby.
10.4 De-register a cordless unit
Use one cordless unit to de-register another. You cannot de-register the cordless unit that
you are using.
1. Press
Menu
, scroll d to
Registration
and press
Select
.
2. Scroll d to
De-register
and press
Select
.
3. Enter the System PIN and press OK. (default setting = 0000)
4. Scroll u or d to the cordless unit you want to de-register and press
Select
.
5. Press
Ye s
to conrm or No to cancel.
6. Press e to return to standby.
Page 36
36 Help
11. Help
No dial tone
• Use only the telephone line cord supplied.
• Check that the telephone line cord is connected properly.
• Check that the mains power is connected properly and switched on.
No display
• Check that the batteries are inserted correctly and fully charged. Use only approved
rechargeable batteries supplied.
• Check that the conferencing unit is switched on. Press and hold n.
• Reset the base by removing the batteries and disconnecting the mains power. Wait
for around 15 seconds before connecting it again. Allow up to one minute for the
conferencing unit and base to synchronize.
icon flashes
• Conferencing unit is out of range. Move closer to the base.
• Make sure that the conferencing unit is registered to the base.
• Check that the mains power is connected properly and switched on.
Keypad does not seem to work
• Check that the keypad lock is not on.
icon is not scrolling during charge
• Adjust the conferencing unit slightly on the base.
• Clean the charging contacts with a cloth moistened with alcohol.
• Check that the mains power is connected properly and switched on.
• The battery is full. When the conferencing unit is fully charged, icon will appear
steady on the display.
No Caller ID
• Check your subscription with your network operator.
• The caller may have withheld their number.
• The record cannot be found in your phonebook. Check that you have the correct
name / number stored in your phonebook, with the full area code.
I have forgotten my PIN!
• Remove one battery, press and hold the star button on the conferencing unit and
replace the battery. The display shows
Master Reset
, press OK. The conferencing unit
will automatically reset and the PIN will default back to 0000.
Cannot register a cordless unit to the base
• You can register up to a maximum of 4 cordless units to a AC1001C base. You must
de-register a cordless unit in order to register a new one.
• Check that you have entered the correct PIN code (default = 0000).
• Check that you are at least one metre away from other electrical equipment to avoid
interference when registering.
Page 37
37Help
Conferencing unit does not ring
• The conferencing unit ringer volume may be set to o.
Noise interference on my phone or on other electrical equipment
nearby
• Place your AC1001C at least one metre away from electrical appliances or any metal
obstructions to avoid any risk of interference.
Page 38
38 General information
12. General information
IMPORTANT
This equipment is not designed to make emergency telephone calls when the power fails.
Alternative arrangements should be made for access to emergency services.
This product is intended for connection to analogue public switched telephone networks
and private switchboards in India.
Important safety instructions
Follow these safety precautions when using your phone to reduce the risk of re, electric
shock, and injury to persons or property:
• Keep all slits and openings of the phone unblocked. Do not set the phone on a heating
register or over a radiator. Ensure that proper ventilation is provided at the installation
site.
• Do not use while wet or while standing in water.
• Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
• Do not allow anything to rest on the power cord. Place the power cord so that it will not
be walked on.
• Never insert objects of any kind into the product vents as that may result in re or
electric shock.
• Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
• Do not disassemble this product. If service or repair work is required, contact the
customer service helpline found in this user’s Guide.
• Do not overload wall outlets and extension cords.
• Avoid using during an electrical storm. Use a surge protector to protect the
equipment.
• Do not use this phone to report a gas leak, especially if you are in the vicinity of the gas
line.
IMPORTANT
To reduce the risk of re, use only the supplied power adaptor.
Unplug this cordless phone immediately from an outlet if:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled on the product.
• The product has been exposed to rain or water. Do not retrieve the cordless audio
conferencing unit or base until after you have unplugged the power and phone from
the wall. Then retrieve the unit by the unplugged cords.
• The product has been dropped or the cabinet has been damaged.
• The product exhibits a distinct change in performance.
Page 39
39General information
Installation Guidelines
• Read and understand all instructions and save them for future reference.
• Follow all warnings and instructions marked on the product.
• Do not install this product near a bath tub, sink, or shower.
• Operate this phone using only the power source that is indicated on the marking label.
If you are unsure of the power supply to your home, consult with your dealer or local
power company.
• Do not place this product on an unstable cart, stand, or table. This product may fall,
causing serious damage to the product.
• Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive
work to restore the product to normal operation.
• Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents to
clean this phone.
• Use only the power supply that came with this unit. Using other power supplies may
damage the unit.
• Because this phone operates on electricity, you should have at least one phone in your
home that could operate without electricity in the case the power in your home goes
out.
• To avoid interference to nearby appliances, do not place the base of the phone on or
near a TV, microwave oven, or VCR.
Battery Safety Instructions
• Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic
materials that could be released, resulting in injury.
IMPORTANT
There is a risk of explosion if you replace the battery with an incorrect battery type.
Use only the batteries that came with your phone or an authorized replacement
recommended by the manufacturer.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
• Do not dispose of batteries in re, which could result in explosion.
• The rechargeable batteries that power this product must be disposed of properly and
may need to be recycled. Refer to your battery’s label for battery type. Contact your
local recycling center for proper disposal methods.
SAVE THESE INSTRUCTIONS
Cleaning
• Clean the cordless unit and base with a damp (not wet) cloth, or an anti-static wipe.
• Never use household polish as this will damage the product. Never use a dry cloth as
this may cause static shock.
Environmental
• Do not expose to direct sunlight.
• The cordless unit may become warm when the batteries are being charged or during
Page 40
40 General information
prolonged periods of use. This is normal. However, we recommend that to avoid
damage, do not place the product on antique / veneered wood.
• Do not place your product on carpets or other surfaces which generate bres, or place
it in locations preventing the free flow of air over
its surfaces.
• Do not submerge any part of your product in water and do not use it in damp or humid
conditions, such as bathrooms.
• Do not expose your product to re, explosives or other
hazardous conditions.
• There is a slight chance that your phone could be damaged by an electrical storm. We
recommend that you unplug the power and telephone line cord during an electrical
storm.
Product disposal instructions
Product disposal instructions for residential users
When you have no further use for it, please remove any batteries and dispose of them and
the product according to your local authority’s recycling processes. For more information,
please contact your local authority or the retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check the terms and conditions of the
purchase contract and ensure that this product is not mixed with other commercial waste
for disposal.
Consumer Products and Accessories Warranty
Thank you for purchasing this Motorola branded product manufactured under license
by Suncorp Technologies Limited, 2/F, Shui On Centre, 6-8 Harbour Road, Hong Kong.
(“SUNCORP”)
What Does this Warranty Cover?
Subject to the exclusions contained below, SUNCORP warrants that this Motorola branded
product (“Product”) or certied accessory (“Accessory”) sold for use with this product
that it manufactured to be free from defects in materials and workmanship under normal
consumer usage for the period outlined below. This Limited Warranty is your exclusive
warranty and is
not transferable.
Who is covered?
This warranty extends only to the rst consumer purchaser, and is
not transferable.
What will SUNCORP do?
SUNCORP or its authorized distributor at its option and within a commercially reasonable
time, will at no charge repair or replace any Products or Accessories that do not conform
to this limited warranty. We may use functionally equivalent reconditioned / refurbished /
pre-owned or new Products, Accessories or parts.
Page 41
41General information
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE
THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA OR SUNCORP BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE
PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS
ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE
PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE
DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential
damages, or limitation on the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specic legal rights, and you may
also have other rights that vary from one jurisdiction to another.
Products Covered Length of Coverage
Consumer Products One (1) year from the date of the products
original purchase by the rst consumer
purchaser of the product.
Consumer Accessories (battery,
power supply(s) and line cords)
Ninety (90) days from the date of the
accessories original purchase by the rst
consumer purchaser of the product.
Consumer Products and Accessories
that are Repaired or Replaced
The balance of the original warranty or for
ninety (90) days from the date returned to
the consumer, whichever is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to
normal wear and tear are excluded from coverage.
• Batteries. Only batteries whose fully charged capacity falls below 80% of their rated
capacity and batteries that leak are covered by this
limited warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage,
misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.)
to the surface of the product resulting from misuse; (b) contact with liquid, water, rain,
extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c)
use of the Products or Accessories for commercial purposes or subjecting the Product
or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of
Motorola or SUNCORP are excluded from coverage.
Page 42
42
General information
Use of Non-Motorola branded Products and Accessories. Defects or damage that result
from the use of Non-Motorola branded or certied Products or Accessories or other
peripheral equipment are excluded from coverage.
Unauthorized Service or Modication. Defects or damages resulting from service,
testing, adjustment, installation, maintenance, alteration, or modication in any way by
someone other than Motorola, SUNCORP or its authorized service centers, are excluded
from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that
have been removed, altered or obliterated; (b) broken seals or that show evidence of
tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola
branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories
due to any communication service or signal you may subscribe to or use with the Products
or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call: 1800 2700 361.
You will receive instructions on how to ship the Products or Accessories at your expense
and risk, to a SUNCORP Authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of
purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty
card was included in your box, a completed warranty card showing the serial number
of the Product; (d) a written description of the problem; and, most importantly; (e) your
address and telephone number.
Technical Information
How many telephones can I have?
All items of telephone equipment have a Ringer Equivalence Number (REN), which is
used to calculate the number of items which may be connected to any one telephone line.
Your AC1001C has a REN of 1. A total REN of 4 is allowed. If the total REN of 4 is exceeded,
the telephones may not ring. With dierent telephone types, there is no guarantee of
ringing, even when the REN is less than 4.
Any additional cordless units and chargers that you register have a REN of 0.
Connecting to a switchboard
This product is intended for use within India for connection to the public telephone
network.
Recall
You may need to use the recall function if you are connected to a switch. Contact your
PABX supplier for further information.
Page 43
<This page has been intentionally left blank>
Page 44
Manufactured, distributed or sold by Suncorp
Technologies Ltd., oicial licensee for this
product. MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of Motorola
Trademark Holdings, LLC. and are used under
license. All other trademarks are the property of
their respective owners. © 2016 Motorola Mobility
LLC. All rights reserved.
Version 5 (IN)
Loading...