Motorola 89FT4885 Users Manual

CP185

™

Quick Reference Guide
Guide de Référence Rapide

more information
autres informations

GO TO /ALLER Á

accessories and user’s guide:
accessoires et guide de l’utilisateur :

www.motorola.com/business

Congratulations on your purchase of the CP185
Two-Way Radio.

This is a Quick Reference Guide; for more inf or m at ion
on this radio features please download the full User
Guide from https://motonline.mot.com or
www.motorola.com/business or call our Customer
Care Service at 1-800-422-4210.

English

1

Radio Overview

English

1
2
3

CP185

9

10

4
5

6

11
12

7

8

2

Radio Control Indicators

Channel Selector Knob

1

ON/OFF/Volume Control Knob

2

LED Indicator

3

Speaker

4

Microphone

5

Liquid Crystal Display (LCD)

6

Push-to-Talk (PTT) Button

7

Side Programmable Buttons

8

Accessory Connector

9

Programming Port

10

Left/Right Buttons

11

Front Programmable Buttons

12

English

3

Menu Navigation Buttons

A

English

B

Front Left/Right Buttons

A

Front Programmable Buttons

B

Programmable Buttons

The following functions can be assigned as
short press (press and release) or long press
(press and hold for more than 1 second):

Button Function

Backlight Toggles backlight display between ON

Channel Alias Toggles display between Channel

4

and OFF.

Number and Channel Alias.

Button Function

Keypad Lock Locks or unlocks all buttons except

Monitor Monitors the channel for any activity as

Nuisance
Channel
Delete

TPL/DPL
Enable

Power Level Selects required power level: High or

Reverse
Burst

PTT, Side Programmable Button 1 and
Side Programmable Button 2, Channel
Selector Knoband ON/OFF/Volume
Knob. Applicable for Long Press Only.

long as the button is pressed.
Removes unwanted channel(s)

temporarily from scan list during Scan.
Applicable for Long Press Only.

Enables or disables radio from
requiring matching TPL/DPL to
unsquelch.

Low.
Select the Reverse Burst Type: None,

180 or 240.

English

Channel
Scan

Scrambling
Code Select

Starts or stops Channel Scan.

Toggles between the two scrambling
codes available.

5

Button Function

Scrambling
Enable/
Disable

English

Squelch
Level

Sticky
Monitor

Talkaround/
Repeater
Mode

Unassigned No function is programmed to this

Volume Set Controls the audio level. The button

VOX Enables or disables VOX feature for

Enables or disables scrambling feature
for the selected channel. Applicable for
Long Press only.

Selects desired squelch level: Normal
or Tight.

Toggles the permanent monitor
function until the button is pressed
again. Applicable for Long Press Only.

Enables toggle between repeater and
talkaround mode operations.

button.

emits a continuous tone to indicate the
current volume level. To change
volume level, turn the volume knob to
the desired level while pressing the
programmable button. Applicable for
Long Press Only.

the selected channel.

6

LCD Display Icons

The following are the icons that appear on the
radio’s display

LCD

Indicator

.

Description Function

Signal
Strength
Indicator

Power Level
Indicator

Talkaround
Indicator

Monitor
Indicator

Voice
Inversion
Scrambling
Indicator

Shows the signal
strength. More bars
indicate a stronger
signal received by
radio.

“L” illuminates to
indicate radio is
configured to transmit
in low power; “H”
illuminates when radio
transmits in high power.

Illuminates when radio
is not transmitting
through the repeater.

Illuminates when
monitoring a selected
channel.

Illuminates when
Scrambling Mode is
ON.

English

7

English

LCD

Indicator

Description Function

Scan
Indicator

Prog. Mode
Indicator

Keypad Lock
Indicator

Blinks without dot when
normal scan is
activated.Illuminates
without dot when there
is some activity on a
non-priority channel.
Illuminates with dot
blinking to indicate that
there is some activity
on the priority channel.

Illuminates when
Programming Mode is
ON.

Illuminates when
keypad is locked.

Battery Level
Indicator

Shows remaining
charge in battery based
on how many bars (1 –

3) are displayed. Blinks
when the battery is low.

8

LED Color Indicators

LED

Color

Green

Amber Illuminated Monitor activated.

State Indication

Illuminated Radio is transmitting in

normal mode. Radio is
transmitting in
Scrambling Mode.

Normal
Blinking

Normal
Blinking

Radio is receiving in
normal mode.
Channel is busy.
Radio passed self-test
during powering up.

Permanent Sticky
Monitor activated.

Radio is in active Scan
Mode. Radio is
receiving in
Scrambling Mode.

English

9

LED

Color

Red Normal

English

10

State Indication

Radio is transmitting in

Blinking

Fast
Blinking

normal mode. Radio is
transmitting in
Scrambling Mode
while battery is low.

Radio failed self-test
during powering up.

Attaching/Removing the Antenna

Threaded End

of Antenna

CP185

To attach, fasten the antenna to the radio by placing
the threaded end of the antenna into the Antenna
Connector and rotate clockwise until tight.
To remove, turn the antenna in a counterclockwise
direction until it disengages from the radio.

Antenna
Connector

English

11

Attaching/Removing the Battery

Battery
Latch

Grooves

Battery Slots

English

To attach, fit the battery slots with the grooves on the radio
and slide the battery upwards until a click is heard.
To remove, slide the battery latch away from the radio,
slide the battery downwards and pull it away from the radio.

12

Attaching/Removing the Belt Clip

Release Tab

Mounting
Grooves

To attach, align mounting rails of the belt clip with the grooves
of the radio.
To remove, safely insert a flat tool between release tab and the
back surface of the radio and lift the release tab.
Slide the belt clip upwards.

English

13

Charging the Battery

English

Make sure radio is OFF , and plug the power supply into an electric outlet
and into the rear of the desktop charging tray. The LED on the charger
blinks green once to indicate the charger is turned ON.

Turn the radio OFF before charging the battery. Insert a battery, or a
radio with a battery into the charger’s pocket. The charger’s LED color
will indicate the battery charging status. (See “Charging Status” on
page 11 of the User Guide On-Line.

CP185

Battery insert
visual guide line

Battery
charging tray

14

Receiving Transmission

1 Turn the radio ON and adjust volume to the

desired level.
2 Select desired channel/talkgroup.
3 Listen for voice activity. The LED indicator

blinks red while receiving.

Transmitting a Message

1 Hold the radio vertically at 1 to 2 inches (2.5 to

5cm) from your mouth. Press the PTT button to

talk. The LED indicator illuminates a steady red

light while transmitting.
2 Release PTT button to listen.

English

15

Scan

Two types of scan are supported: Normal Scan and
Priority Scan. Normal Scan searches all channels
sequentially in the radio’s scan list, whereas Priority

English

Scan allocates 50% of the scanning time to the
Priority Channel (the first channel in the designated
scan list).

Start

Ch. 1

Ch. 2

Home

Ch. 3

Normal Scan

Ch. 16

Ch. 4

Ch. 14

Ch. 15

Start

Ch. 1

Ch. 2

Channel 1 Prioritized

Home

Ch. 1

Priority Scan

Ch. 1

Ch. 3

Ch. 1

Ch. 16

During scan, when activity is detected that meets
the unsquelch condition, the radio stops scanning
and switches to that channel; the

indicator is

illuminated, and the channel number is displayed.

16

When no activity is detected for a pre-set time, the
radio resumes scanning.

Nuisance Channel Delete

A channel with unwanted activity is called a
Nuisance Channel. You can remove a Nuisance
Channel from the scan list temporarily.

To remove a Nuisance Channel

Press the Nuisance Channel Delete programmable

when your radio stops on a Nuisance

button,
Channel. A high-pitched tone is heard. You cannot
remove the Home or Priority Channel from the scan
list. If attempted, a low-pitched tone is heard, and
no action is taken.

To reinstate the deleted channel(s) into the scan
list, restart scan, or simply turn OFF your radio and
turn it ON again.

17

English

Voice Operated Transmit VOX

When the VOX headset/microphone is connected,
your radio may be used in hands-free operation.

English

To start VOX

1 Connect the VOX headset to the accessory

connector of the radio. Make sure the radio is

turned OFF before connecting the VOX

accessory.
2 Turn the radio ON.

To disable VOX

1 Press the PTT button on the radio. This allows

you to use the VOX headset, but you must

press the radio PTT to transmit.

To re-enable VOX

1 Turn the radio OFF, and turn it ON again, with

the headset connected to the accessory

connector, or
2 Change channel with the VOX headset

connected.

Note: VOX needs to be enabled for each channel in the

CPS before VOX accessories can be used with
radio.

18

Voice Inversion Scrambling

Your radio has the Voice Inversion Scrambling
feature which gives you an extra layer of privacy.
This scrambling function is implemented via a
frequency inversion in analog mode using two
standard codes.

To Enable and Disable the Scrambling Mode

Configure one of the programmable buttons for
Scrambling Mode via the CPS. Press this button to
enable or disable the function. You can also
configure this function via the Front Panel Feature
and Button Configuration Mode. See the Front Panel
Feature and Button Configuration Mode chapter of
the User Guide

To Change the Scrambling Code

Configure one of the programmable buttons for
Scrambling Code. Press this button to toggle
between the two codes. You can also configure this
function via the Front Panel Feature and Button
Configuration Mode. See the Front Panel Feature
and Button Configuration Mode chapter of the User
Guide.

.

English

19

Product Safety and RF Energy Exposure
for Portable Two-Way Radios

The information provided i n thi s do cum e nt supersedes the general
safety information in user’s guides published prior to February 2002.

English

032374o

BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH
CONTAINS IMPO RTANT OPERATING INSTRUCTIONS FO R
SAFE USAGE AND RF ENERGY AWARENESS A ND CONTROL

Caution

INFORMATIO N AND OPERATIONAL INS TRUCTIONS FOR
COMPLIANCE WITH RF ENERGY EXPOSUR E LIMITS IN
APPLICABLE NATIONAL AND INTERNATIONAL
STANDARDS . ALS O RE AD TH E OP E RATIONAL INSTRUCTIO NS
FOR SAFE USAGE. FOR RADIOS THAT HAVE BEEN APPROVED
AS INTRINSICALLY SAFE, READ THE INSTRUCTIONS AND
INFORMATIO N O N INTRIN SIC S AFETY ON THIS BOOKLET.

Symbol Key

Your battery, charger, or radio may contain symbols, defined as follows:

Symbol Definition

Restricted to occupational use to satisfy FCC RF
exposure limits. See User’s Manual for operating
requirements.

This product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC and all other relevant EU
Directives.

032374o

Important safety information follows.

WARNING

20

Symbol Definition

032376o

Do not dispose of your battery or radio in a fire.

Do not throw your battery in the trash.

Do not throw your radio in the trash.

Battery or radio may require recyclin g in accordance
with local laws. Do n o trow you r batter y or radi o in the
trash. www.motorola.com/recycling.

RF Energy Exposure Awareness and Control Information and
Operational Instructions for Occupational Use

NOTICE: This radio is intended for use in occupational/controlled
conditions where users ha v e f ull knowledge of their exposure and can
exercise control over their exposu re to me et the occupational limits in
FCC and International s tandards. This radio dev i c e is NOT authorized
for general population consumer use.
This two-way radio uses electromagnetic energy in the radio frequency
(RF) spectrum to provide communications between two or more users
over a distance. It uses radio frequency (RF) energy or radio waves to
send and receive calls . RF energ y is one fo rm of elec tromagne tic energ y .
Other forms include, but are not limited to, sunlight and x-rays. RF
energy, however, should not be confused with these other forms of
electromagnetic energy, which when used improperly, can cause
biological damage. Very high levels of x-rays, for example, can damage
tissues and genetic material.

21

English

Experts in science, en gineering, me dicine, health , and indust ry work with
organizations to develop standards for safe exposure to RF energy.
These standards provide recommended levels of RF exposure for both
workers and the general public. These recommended R F exposure
levels include substantial margins of protection.
All Motorola two-way radios are designed, manufactured, and tested to
ensure they meet government-established RF exposure levels. In

English

addition, manufacturers also recommend specific operating instructions
to users of two-way radi os . These instructions are impo rtant because
they inform users about RF energy exposure and provide simple
procedures on how to control it.
Please refer to the following websites for more information on what RF
energy exposure is and how to control your exposure to assure
compliance with established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html

Federal Communication Commission (FCC) Regulations
The FCC rules require manu facturer s to comply w ith the FCC RF energy
exposure limits fo r po rt a ble t wo- w ay r adio s be f ore t hey ca n b e m ark ete d
in the U.S. When two-way radios are used as a consequence of
employment, the FCC requires users to be fully aware of and able to
control their exposure to meet occupati onal requirements. Exposure
awareness can be facilitated by the use o f a product label d irecting users
to specific user awareness information. Your Motorola two-way radio has
a RF Exposure Product Label. Also, your Motorola user manual, or
separate safety booklet includes information and operating instructions
required to control your RF exposure and to satisfy compliance
requirements.

Compliance with RF Exposure Standards
Your Motorola two-way radio is designed and tested to comply with a
number of national and International standards and guidelines (listed
below) for human exposure to radio frequency electromagnetic energy.
This radio complies with the IEEE (FCC) and ICNIRP exposure limits for
occupational/controlled RF exposure environments at operating duty

22

factors of up to 50% talk-50% listen and is authorized by the FCC for
occupational use only. In terms of measuring RF energy for compliance
with these exposure guidelines, your radio generates measurable RF
energy only while it is transmitting (du ring t alkin g), not when it is receivi ng
(listening) or in standby mode.

Note:

The approved batteries, supplied with this radio, are rated for a

5-5-90 duty factor (5% talk-5% listen-90% standby) even though
this radio complies with FCC occupational exposure limits and
may operate at duty factors of up to 50% talk.

Your Motorola two-way radio complies with the following RF energy
exposure standards and guidelines :

•

United States Federal Communications Commission, Code of
Federal Regulations; 47CFR part 2 sub-part J

•

American National Standards Institu te ( AN S I) I Inst i tu te of
Electrical and Electroni c Eng i ne er s (IEEE) C95.1-1992

•

Institute of Electrical and Electronic Engineers (IEEE)
C95.1-2005 Edition

•

International Commission on Non-Ioniz i ng Radiation Protection
(lCNIRP) 1998

•

Ministry of Health (Canada) Safety Code 6. Limits of Human
Exposure to Radio frequenc y Electromagnetic Fields in the
Frequency Range from 3 kHz to 300 GHz, 1999

•

Australian Communications Authority Radiocommunications
(Electromagnetic Radiation - Human Exposure) Standard, 2003

•

ANATEL ANNEX to Resolution No. 303 of July 2, 2002
“Regulation of limitation of exposure to electrical, magnetic and
electromagnetic field in the radio frequency range betwee n 9
KHz and 300GHz “and “Attachment to resolution # 303 from July
2, 2002."

23

English

RF Exposure Compliance and Control Guidelines and Operating
Instructions

To control your exposure and ensure compliance with the occupational/
controlled environment exposure limits, always adhere to the following
procedures.
Guidelines:

•

Do not remove the RF Exposure label from the device.

English

•

User awareness instructions should accompany device when
transferred to other users.

•

Do not use this device if the operational requirements described
herein are not met.

Operating Instructions

•

Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the Push-To-Talk (PTT) button. To receive
calls, release the PTT button. Transmitting 50% of the time, or less,
is important because this radio generates measurable RF energy
exposure only when transmitting (in terms of measuring for
standards compliance).

Two-W ay Radio Operation

•

Hold the radio in a vertical position in front of the
face with the microphone (and other parts of the
radio including the antenna) at least one inch (2.5
centimeters) away from the nose or lips. Antenna
should be kept away from the eye. Keeping the
radio at a proper distance is important since RF exposures
decrease with increasing distance from the antenna.

Body Worn Operation

•

When worn on the body, always place the radio in a
Motorola-approved clip, holder, holster, case, or body harness for this
product. Using approved bodyworn accessories is important because

24

the use of non-Motorola-approved accessories may result in
exposure levels, which exceed the FCC occupational/controlle

environment RF exposure limits.

•

If you are not using a body-worn accessory and are not using the
radio in the intended use position in front of the face, ensure the
antenna and the radio are kept at least one inch (2.5 centimeters)
from the body when transmitting. Keeping the radio at a proper
distance is important because RF exposures decrease with
increasing distance from the antenna.

•

DO NOT hold the antenna when the radio is transmitting. Holding
the antenna affects call quality and may cause the radio product to
operate at higher or lower level than needed.

•

DO NOT touch the metal surface of the antenna (in extended
position) when he radio is transmitting. RF discomfort may result.

Approved Accessories

•

Use only Motorola-approved supplied or replacement antennas,
batteries, and accessories. Use of non-Motorola-approved
antennas, batteries, and accessories may exceed the FCC (IEEE)
and ICNIRP RF exposure guidelines.

•

For a list of Motorola-approved accessories, visit the following
website, which lists approved accessories for your radio model:
http://www.motorola.com/business.

Additional Information
For additional information on exposure requirements or other training
information, visit http://www.motorola.com/rfhealth.

Electromagnetic Interference/Comp atibility

Note:

Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed, or
otherwise configured for electromagnetic compatibility.

d

English

25

Facilities
To avoid electromagnetic interference and/or compatibility conflicts,
turn OFF your radio in any facility where posted notices instruct you
to do so. Hospitals or health care facilities may be using equipment
that is sensitive to external RF energy.

English

Aircraft
When instructed to do so, turn OFF your radio when on board an
aircraft. Any use of a radio must be in accordance with applicable
regulations per airline crew instruct ions.

Medical Devices
Pacemakers

The Advanced Medical Technology Association (AdvaMed)
recommends that a minimum separ ation of 6 inches (15 centim eters)
be maintained between a handheld wireless radio and a pacemaker.
These recommendations are cons is tent with those of the U.S. Food
and Drug Administration.
Persons with pacemakers should:

•

ALWAYS keep the radio more than 6 inches (15 centimeters)
from their pacemaker when the radio is turned ON.

•

DO NOT carry the radio in the breast pocket.

•

Use the ear opposite the i m pl a ntable medical device to mi n imi ze
the potential for interference .

•

Turn OFF the radio immediately if you have any reason to
suspect that interfer ence is taking place.

Hearing Aids
Some digital wirel ess ra dios ma y inte rfere with so me hear ing a ids. In
the event of such interference, you may want to consult your hearing
aid manufacturer or physician to discuss alternatives.

26

Other Medical Devices
If you use any other personal medical devices, consult your
physician or the manufacturer or your device to determine if it is
adequately shielded from RF energy. Your physician may be able to
assist you in obtaining this information.

Use of Communication Devices While Driving
Always check the laws and regulations on the use of radio products
in the area where you drive.

When using your radio product while driving, please:

•

Give full attention to driving and to the road. Using a radio may
be distracting. Discontinue a call if you can’t concentrate on
driving.

•

Use hands free operation, if available.

•

Pull OFF the road and park before making or answering a call if
driving conditions so require.

Operational Warnings

032374o

For Vehicles With Air Bags:
Refer to vehicle manufacturer's manual pri or to ins t a llation
of electronic equipment to avoid interference with air bag

WARNING

wiring.
DO NOT place a portable radio in the area over an air bag
or in the air bag deployment area. Air bags inflate with
great force. If a portable radio is placed in the air bag
deployment area and the air bag inflates, the radio may b e
propelled with great force and cause serious injury to
occupants of the vehicle.

Potentially Explosive Atmospheres:
(Explosive atmospheres refers to hazard classified
locations that may contain hazardous gas, vapors, or
dusts.) Turn OFF y our radio prior to entering any area with
a

English

27

032374o

potentially explosive atmosphere unless it is a portable
radio type especially qualified for use in such areas as
Intrinsically Safe (for example, Factory Mutual, CSA, UL,

WARNING

or CENELEC).

English

DO NOT remove, install, or charge batteries in such areas.
Sparks in a potentially explosi ve atmosph ere can ca use an
explosion or fire resulting in bodily injury or even death.
The areas with potentially explosive atmospheres referred
to above include fueling areas such as below decks on
boats, fuel or chemical transfer or storage facilities, and
areas where the air contains chemicals or p articles such as
grain, dust or metal powders. Areas with potentially
explosive atmospheres are often, but not always, posted.

Blasting Caps and Blasting Areas:
To avoid possible interference with blasting operations,
turn OFF your radio when you are near electrical blasting
caps, in a blasting area, or in areas posted: “Turn OFF
two-way radio.” Obey all signs and instructions.

28

Operational Cautions

032374o

Antennas
DO NOT use any portable radio that has a damaged
antenna. If a damaged antenna comes into contact with

WARNING

your skin, a minor burn can result.
Batteries
All batteries can cause property damage and/or bodily
injury, such as burns, if a conductive material such as
jewelry, keys, or beaded chains touches exposed
terminals. The conductive material may complete an
electrical circuit (short circuit) and become quite hot.
Exercise care in handling any charged battery,
particularly when placing it inside a pocket, purse, or
other container with metal objects.

Intrinsically Safe Radio Information

The Intrinsically safe approval unit refers to a product that has been
approved as intrinsically safe by an approval agency (for example
FM Approvals, CSA, UL, or Cenelec) and certifies that a particular
product meets the Agency's applicable intrinsic safety standards for
specific types of hazardous classified locations. A portable radio that
has been approved for intrinsic safety will have Approval label
attached to the radio to identify the unit as being Approved for
specified hazardous atmospheres. This label specifies the
hazardous Class/Division/Gr oup along with the part number of the
battery that must be used. The Intrinsically Safe Approval Label will
be located on the portable radio unit.

29

English

Operational Cautions for Intrinsic Safe Equipment

032374o

•

DO NOT operate radio communications equipment in a
hazardous atmosphere unless it is a type especially

WARNING

English

Warnings for Radios Approved as Intrinsically Safe
Radios must ship from the Motorola manufacturing facility with the
hazardous atmosphere capabilit y and the intrinsic safety approva l
labelling (FM, UL, CSA, CENELEC). Radios will not be upgraded to
this capability and labeled once they have been shipped to the field.

qualified (for example, FM, UL, CSA, or CENELEC
approved). An explosion or fire may result.

•

DO NOT operate a radio unit that has been approved as
intrinsically safe product in a hazardous atmosphere if it
has been physically damaged (for example, cracked
housing). An explosion or fire may result.

•

DO NOT replace or charge batteries in a hazardous
atmosphere. Contact sparking may o ccur while i nstall ing
or removing batteries and cause an explosion or fire.

30

A modification changes the unit’s hardware from its original design

G

configuration. Modifications can only be made by the original product
manufacturer.

032374o

•

DO NOT replace or change accessories in a
hazardous atmosphere. Contact sparking may occur

WARNIN

while installing or removing accessories and cause an
explosion or fire.

•

Turn the radio OFF before removing or installing a
battery or accessory .

•

DO NOT disassemble an intrinsically safe product in
any way that exposes the internal circuits of the unit.

•

Failure to use an intrinsically safe approved battery or
Approved accessories specifically approved for the
radio unit may result in the dangerously unsafe
condition of an unapproved radio combination being
used in a hazardous location.

•

Unauthorized or incorrect modification of the
intrinsically safe approved Product will negate the
approval rating of the product.

•

Incorrect repair or relabeling of any intrinsically safe
Agency approved radio could adversely affect the
approval rating of the unit.

•

Use of a radio that is not intrinsically safe in a
hazardous atmosphere could result in serious injury or
death.

Repair

032374o

REPAIRS FOR MOTOROLA PRODUCTS WITH
INTRINSICALLY SAFE APPROVAL ARE THE
RESPONSIBILITY OF THE USER.

WARNING

Repairs to a Motorola FM approved radio product should
only be done at a location that has been FM audited under
the FM 3605 repairs and service standard.
Contact Motorola for assistance regarding repairs and
service of Motorola intrinsically safe equipment.

31

English

A repair constitutes somethi ng done internally to the unit that would
bring it back to its original condition.

Items not considered as repairs are those in which an action is
performed on a unit which does not require the outer casing of the
unit to be opened in a manner that exposes the internal electrical
circuits of the unit.

English

Do Not Substitute Options or Accessories
The Motorola communications equipment certified as intrinsically
safe by the approving agency, (FM, UL, CSA, CENELEC) is tested
as a complete system which consists of the listed agency Approved
portable, Approved ba ttery, and Appr ove d accesso ries or opti ons, or
both. This Approved portab l e an d ba tte r y combi n ation must be
strictly observed. There must be no substitution of items , ev en if the
substitute has been previously Approved with a different Motorola
communications equipment unit . Approved configurations are lis ted
by the Approving Agency (FM, UL, CSA, CENE LEC).
The Intrinsically Safe Approval Label affixed to radio refers to the
intrinsically safe classification of that radio product, and the approved
batteries that can be used with that system.

The manual PN referenced on the Intrinsically Safe Approval Label
identifies the approved Acc essories and or options that can be used
with that portable radio unit.

Using a non-Motorola-intrinsically-safe battery and or accessory with
the Motorola approved radio unit will void the intrinsically safe
approval of that radio unit.

32

Motorola Limited Warranty for the United
States and Canada

Warranty

What Does this Warranty Cover?

Subject to the exclusions contained below, Motorola, Inc. warrants its
manufactured Radius Communication Products (“Products”),
Motorola-branded or certified ac c essories sold for use with these
Products (“Accessories”) and Motorola software contained on
CD-ROMs or other tangible media and sold for use with thes e
Products (“Software”) to be free from def ects in materials and
workmanship under normal consumer usage for the period(s)
outlined below. This limited warranty applies as follows to new
Motorola Products, Accessories and Software purchased by
consumers in the United States or Canada, which are accompanied
by this written warranty:

Products and Accessories

Products Covered Length of Coverage
Motorola CP185 Radio

Kit

Motorola Accessories
Mag One Accessories

Products and
Accessories that are
Repaired or Replaced.

Two (2) years

One (1) year
Six (6) months

The balance of the original
warranty or for ninety (90) days

from the date returned to the
consumer, whichever is longer.

33

English

Exclusions

Normal Wear and Tear.

replacement of parts due to normal wear a nd tear are excluded from
coverage.

Batteries.

Only batteries whose fully charged capacity falls below

80% of their rated capacity and batteries that leak are covered by

English

this limited warranty.

Abuse & Misuse.

operation, storage, misuse or abuse, accident or neglect, such as
physical damage (cracks, scratches, etc.) to the surface of the
product resulting from misuse; (b) contact with liquid, water, rain,
extreme humidity or heavy perspira tion, sand, dirt or the like,
extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting t he Product or Accessory to
abnormal usage or conditions; or (d) other acts which are not th e
fault of Motorola, are excluded from coverage.

Use of Non-Motorola Products and Accessories.

damage that result from the use of non-Motorola branded or certified
Products, Accessories, Software or other peripheral equipment are
excluded from coverage.

Unauthorized Service or Modification.

resulting from servic e, testing, adjustment, installation, maintenance,
alteration, or modificati on in any way by someone other than
Motorola, or its authorized service centers, are excluded from
coverage.

Altered Products.

or date tags that have been removed, al tered or obliterated;
(b) broken seals or that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or non-Motorola
housings, or parts, are excluded from coverage.

Communication Services.

Products, Accessories or Software due to any communication
service or signal you may subscribe to or use with the Products
Accessories or Software is excluded from coverage.

Periodic maintenance, repair and

Defects or damage that result from: (a) improper

Defects or

Defects or damages

Products or Accessories with (a)serial numbers

Defects, damages, or the failure of

34

Software

Products Covered Length of Coverage
Software.

Applies only to physical
defects in the media that embodies
the copy of the software (e.g.
CD-ROM, or floppy disk).

Exclusions

Software Embodied in Physical Media.

software will meet your requirements or will work in combination with any
hardware or software applications provided by third parties, that the
operation of the software products will be uninterrupted or error free, or
that all defects in the software products will be corrected.

Software NOT Embodied in Physical Media.

embodied in physical media (e.g. software that is downloaded from the
internet), is provided “as is” and without warranty.

Who Is Covered?
This warranty extends only to the first consumer purchaser, and is not
transferable.

What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund the
purchase price of any Products, Accessories or Software that does not
conform to this warranty. We may use functionally equivalent
reconditioned/refurbished/pre-owned or new Products, Accessories or
parts. No data, sof tware or applic ations adde d to your Produc t, Accessor y
or Software, including but not limited to personal contacts, games and
ringer tones, will be reinstalled. To avoid losing such data, software and
applications please create a back up prior to requesting service.

Ninety (90) days

the date of purchase.

No warranty is made that the

Software that is not

from

35

English

How to Obtain Warranty Service or Other Information

USA
Canada
TTY

English

For
number designated above for the product with which they are
used.

You will receive instructions on how to ship the Products,
Accessories or Software, at y our expense, to a Motorola Autho rized
Repair Center. T o obtain service, you must include: (a) a copy of your
receipt, bill of sale or other comparable proof of purchase; (b) a
written description of the problem; (c) the name of your service
provider, if applicable; (d) the name and location of the installation
facility (if applicable) and, most importantly; (e) your address and
telephone number.

Accessories

1-800-422-4210
1-800-461-4575
1-888-390-6456

and

Software

, please call the telephone

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT , OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR
SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR

36

DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS
ARISING OUT OF OR IN CONNECTION WITH THE ABILITY

OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR
SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE
DISCLAIMED BY LAW.

Some states and jurisdic tions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation
on the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that
vary from state to state or from one jurisdiction to another.

Laws in the United States and other countries preserve for Motorola
certain exclusive rights for copyrighted Motorola sof tware such as
the exclusive rights to repr od u c e an d di str i b ut e c op i es of th e
Motorola software. Motorola software may only be copied into, used
in, and redistributed with, the Products associated with such
Motorola software. No other use, including without limitation
disassembly of such Motorola software or exercise of the exclusive
rights reserved for Motorola, is permitted.

37

English

Software Copyright Notice

The Motorola products described in t his manual may include
copyrighted Motorola and third-party software stored in
semiconductor memories or other media. Laws in the United States
and other countries preserve for Motorola and third-party software
providers certain exclusive rig hts for c opyrighted software, such as

English

the exclusive rights to distribute or reproduce the copyrighted
software. Accordingly, any copyrighted software contained in the
Motorola products may not be modified , reverse-engineered,
distributed, or reproduced in any manner to the extent allowed by
law. Furth ermor e, the purc hase of the Motoro la prod uct s shall not be
deemed to grant either directly or by implic ation, estoppel, or
otherwise, any license unde r the cop yr i ghts, patents, or patent
applications of Motorola or any third-party software provider, except
for the normal, non-exclusive, royalty-free license to use that arises
by operation of law in the sale of a product.

38