Motorola 89FT4852 Users manual

@6864110R05@
6864110R05-O
Model T6410
2
Contents
Safety/General Information . . . i
FCC License Information . . . . 1
Installing Batteries . . . . . . . . . . .4
CommPort™ Charging Dock . .7
Basic Operation of Radio . . . 10
Belt Clip . . . . . . . . . . . . . . . .10
Backlight . . . . . . . . . . . . . . . . .14
Talking . . . . . . . . . . . . . . . . . . 15
Before You Can Talk . . . . . . . .15
To Talk . . . . . . . . . . . . . . . . . .17
Call Tone and Call Display . . .19
Alerts . . . . . . . . . . . . . . . . . . .20
VibraCall® Alert . . . . . . . . . . .20
Keeping Time . . . . . . . . . . . . .21
Setting the Time . . . . . . . . . . .21
Setting the Alarm . . . . . . . . . . .22
Stopwatch . . . . . . . . . . . . . . . .23
Hands-Free Use (VOX) . . . . . 24
Privacy . . . . . . . . . . . . . . . . . .25
Eavesdrop Reducer . . . . . . . . .25
QuieT6000 . . . . . . . . . . . . . .26
Advanced Two-Way . . . . . . .27
Lock . . . . . . . . . . . . . . . . . . . . .27
LockPlus . . . . . . . . . . . . . . . . .27
Channel Scanning . . . . . . . . . .27
Talk Confirmation Tone . . . . . .28
Button Beeps . . . . . . . . . . . . . .28
Automatic Power Off . . . . . . . .29
Monitor . . . . . . . . . . . . . . . . . .29
Reset . . . . . . . . . . . . . . . . . . . .31
Setting the Battery Type . . . .31
Use and Care . . . . . . . . . . . . .31
Frequency and Code Charts 34
Troubleshooting . . . . . . . . . .37
Motorola Limited Warranty . . 40
PRELIMINARY
SAFETY AND GENERAL INFORMATION
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION READ THIS INFORMATION BEFORE USING YOUR RADIO. The information provided in this document supersedes the general safety information contained in user guides published prior to July 2000. For information regarding radio use in a hazardous atmosphere please refer to the Factory Mutual
(FM) Approval Man ual Supplement or Instruction Card, which is included with rad io models that offer this capability.
RF Operational Characteristics
Your radio contains a transmitter and a receiver. When it is ON, it receives and transmits radio frequency(RF) energy. The radio operates in the frequency range of
462.5625 MHz to 462.7250 MHz and employs analogue modulation techniques.
Exposure To Radio Frequency Energy
Your Motorola radio is designed to comply with the following national and international standards and guidelines regarding exposur e of human beings to r adio frequency electromagnetic energy:
United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J
American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
National Council on Radiation Protectio n and Measurements ( NCRP) of the
United States, Report 86, 1986
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
PRELIMINARY
SAFETY AND GENERAL INFORMATION
i
Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the F requency Range from 3 kHz to 300 GHz, 1999
Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 1999 (applicable to wireless phones only)
To assure optimal radio performance and make su re human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:
PORTABLE RADIO OPERATION AND EME EXPOSURE
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the radio and may violate FCC regulations. DO NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects call quality and may cause the radio to operate at a higher power level than needed.
Two-way Radio Operation
When using your radio as a traditional two-way radio, hold the radio in a vertical
position with the microphone one to two inches (2.5 to 5 cm) away from the lips.
SAFETY AND GENERAL INFORMATION
ii
PRELIMINARY
Body-worn Operation
To maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in a Motorola
supplied or approved clip, holder, holster, case, or body harness for this
product. Use of non-Motorola-approved acc essories may exceed FCC/Health
Canada RF exposure guidelines. If you do not use a body-worn accessory, and are not using the radio held in the normal use position at the ear, ensure the radio
and its antenna are at least one inch (2.5 cm) from your body when
transmitting.
Data operation
When using any data f eature of the radio, with or without an accessory cable,
position the radio and its antenna at least one inch (2.5 cm) from the body.
Approved Accessories
For a list of approved Motorola accessories visit our website at www.mot.com.
ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY
Note: Nearly every electronic de vice is susceptib le t o electromagnetic in terf eren ce
(EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility.
FACILITIES
To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.
PRELIMINARY
SAFETY AND GENERAL INFORMATION
iii
AIRCRAFT
When instructed to do so, turn off your rad io when on board an aircraft. An y use of a radio must be in accordance with applicable regulations per airline crew instructions.
MEDICAL DEVICES
Pacemakers
The Advanced Medical Technology Association recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless radio and a pacemaker.These recommendations are consistent with the independent research by, and recommendations of, the United States Food and Drug Administration. Persons with pacemakers should:
ALWAYS keep the radio more than six inches (15 centimeters) from their pacemaker when the radio is turned ON.
not carry the radio in the breast pocke t.
use the ear opposite the pacemaker to minimize the potential for
interference.
turn the radio OFF immediately if you have any reason to suspect that interference is taking place.
Hearing Aids
Some analogue wireless radios ma y interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.
SAFETY AND GENERAL INFORMATION
iv
PRELIMINARY
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
SAFETY AND GENERAL USE WHILE DRIVING
Check the laws an d regulatio ns on the use of r adio in the area where y ou driv e . Always obey them. When using your radio while driving, please:
Give full attention to driving and to the road.
Use hands-free operation, if available.
Pull off the road and park before making or answering a call if driving
condtions so require.
OPERATIONAL WARNINGS
FOR VEHICLES WITH AN AIR BAG
Do not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflat e with grea t f orce . If a portable r adio is placed in the air bag deployment area an d the air bag inf lates , the r adio may be propelled with great force and cause serious injur y to occupants of the vehicle.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn off your radio prior to entering any area with a potentially explosive atmosphere, unless it is a radio type especially qualified f or use in such are as as "Intrinsically Safe." Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.
PRELIMINARY
SAFETY AND GENERAL INFORMATION
v
Note: The areas with potentially explosive atmospheres referred to above include
BLASTING CAPS AND AREAS
fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or par tic les, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted.
To avoid possible inte rf er ence with b lasting oper ations , turn off y our r adio wh en you are near electrical b lasting caps , in a bl asting area, or in areas posted: “Turn off two-way radio. Obey all signs and instructions.
OPERATIONAL CAUTIONS
ANTENNAS
Do not use any portable radio that has a damaged antenna. If a damaged
antenna comes into contact with your skin, a minor burn can result.
BATTERIES
All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains to uch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or othe r container with metal objects.
SAFETY AND GENERAL INFORMATION
vi
PRELIMINARY
DCharging Safety Instructions
Before using the battery charger, read all instructions and cautionary markings on the:
1. battery
2. battery charger, and
3. radio using the battery. Caution: To reduce the risk of injury , charge only the rechargeab le batteries listed.
Other types of batteries may burst, causing personal injury and damage.
Single-Unit Charger
Kit Number Description
NTN9393 110V - NiMH Charging Adapter
Batteries
Kit Number
NTN9395 550 mAH T6000-Series NiMH
Save these Instructions
1. Do not expose the ch arg e r to rain or snow.
2. Do not operate the charger if it has received a sharp blow , or h as been drop ped or damaged in any way.
Capacity in milliampere-hour mAH
Description Composition
PRELIMINARY
SAFETY AND GENERAL INFORMATION
vii
3. Do not disassemble the charger if it has received a sharp blow, or has been dropped or damaged in any way.
4. Never alter the AC cord or plug provided with the unit. If plug will not fit the out­let, have proper outlet installed by a qualified electrician. An improper condition can result in a risk of electric shock.
5. To reduce risk of damage to cord or plug, pull the plug rather th an the cord when disconnecting charger from AC receptacle.
6. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning.
7. Use of an attachment not recommended or sold b y Mot orola may result in a risk of fire, electric shock, or personal injury.
8. Make sure that the cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress.
9. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and/or electric shock. If an extension cord must be used, make sure:
That the pins on the plug of the extension cord are the same number, size
and shape as those on the plug of the charger.
That the extension cord is pro perly wired and in good electrical condition,
and
That the cord size is18 AWG for lengths up to 100 feet, and 16 AWG for
lengths up to 150 feet.
10. The supply cord of this charger cannot be replaced. If the cord is damaged, the charger should be discarded or returned to the point of purchase if within 90
SAFETY AND GENERAL INFORMATION
days of purchase.
viii
PRELIMINARY
FCC Licensing Information
Your Motorola radio operates on General Mobile Radio Service (GMRS) frequencies and is subject to the Rules and Regula tion s of the Federal Communications Commission (FCC). The FCC requires that all operators using General Mobile Radio Service (GMRS) frequencies obtain a r adio license before operating their equipment.
To have the FCC forms faxed to you, contact the Fax-On-Demand 1-202-418-0177 from your fax machine and request document 000605 for all forms
and instructions. To have the forms mailed to you, call the FCC forms hotline at: 1-800-418-FORM (1-800-418-3676) For questions about the license application, contact the FCC at:
1-888-CALL-FCC (1-888-225-5322)
Or: http://www.fcc.gov Before filling out your application, you must decide which frequency(ies) you can
operate on. See on page 34. For questions on determining your radio frequency, please call Motorola Product Services at: 1-800-448-6686
system at:
PRELIMINARY
FCC Licensing Information
1
Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules.
Note: Use of this radio outside the country where it was intended to be
distributed is subject to gove rnment regulations and may be prohibited.
FCC Licensing Information
2
Getting Started
Hi, I’m QuickStart and I’m going to help you get started!
The Motorola way radio that allows you to stay connected to family, friends, and companions. The T6410 operates on
General Mobile Radio Service (GMRS) frequencies;
GMRS are subject to FCC licensing requirements. These radios offer more than just a way of keeping in
touch. They also help you and your group stay on schedule because a clock, alarm, and stopwatch are built into each model.
Talkabout® T6410 radio is a durable two-
A detachable Quick Reference Card is included.
Please read this manual to aid in understanding how your radio works.
PRELIMINARY
Getting Started
3
Installing Batteries
Your radio uses three AA batteries or a rechargeable Nickel-Metal Hydride (NiMH) battery.
Latch
Turn off the radio
Getting Started
(see page 13).
Push latch up until it clicks.
Lift back cover off.
Note: The radio keeps the clock settings if battery changes are made in less than
20 seconds. Try replacing one battery at a time.
Remove and replace batteries so the + and ­markings match the ones in the compartment or the NiMH charge contacts are facing out.
Hook back cover on the hinges.
Align tabs.
Close battery door,
pressing lightly until latch clicks.
4
The battery meter on the top-left corner of the display shows how much battery power you have. It shows d (full), b (two-thirds full), c(one-third full) and a (almost empty). When it’s c, the radio beeps every ten minutes. So, change or charge those batteries!
Charging the NiMH battery (Optional Accessory, part number 56319)
Charge the NiMH overnight (12 to 16 hours) before using it for the first time, it will need up to four hours of charging thereafter.
PRELIMINARY
Getting Started
5
Turn off the radio (see page 13) or place the NiMH battery in the charger adapter cover.
Plug in the charger.
At the contacts on the back of the r adio, or if charging just the battery, at the
battery contacts:
Position the cha rger with the hook o n the LED end of the charger placed o v er the larger slot.
Snap the hook on the cord end into the smaller slot.
Note: If you notice the LED flashing red for more than a minute while clamping
the charger onto the charger adapter cover, the battery is faulty and must be replaced.
When the LED turns solid green, the battery is fully charged. Note: When charging the battery by itself, remove the charger from the charger
adapter cover before removing the battery.
Getting Started
6
CommPort Charging Dock (Included with Optional Accessory, part number 56319)
The CommPort charging dock provides drop-in charging convenience. The charging dock can be mounted or placed on any flat surface (such as a wall or workbench) and turns your radio into a stat ion ary intercom while k eeping it cha rged and ready for any adventure.
To mount the charging do ck:
Wrap the power cord under the charging dock.
Use the cutouts to hold the cord in place.
Attach using two #6 x ¾” screws appropriate for the mounting surface.
Cutouts
PRELIMINARY
Getting Started
7
Position the charger with the hook on the
LED end over the left slot.
Snap the hook on the cord end into the right slot, clamping the charger onto the charging dock contacts
Plug in the charger.
Place the radio, or the NiMH battery in the
charger adapter cover, into the CommPort
Getting Started
charging dock.
When the LED turns solid green, the battery is fully charged.
8
Charging Status
The LED charger indicates charging status when the charger is connected to the radio, the NiMH battery, or the CommPort charging dock.
Color
Solid Red Rapid charging Up to 90% Flashing Green Top-off charging 90% to 100% Solid Green Charging complete 100%
Flashing Red
Flashing Yellow
Charging Status and Description
Battery faulty . If flashing red persists for more than
one minute, the battery is faulty and should be replaced.
Standby Battery waiting to charge. Temperature out of range for charging;
must be between 5
o
to 104
F
o
to 40o C or 41o
Charging Level Complete
-
-
PRELIMINARY
Getting Started
9
Loading...
+ 44 hidden pages