Page 1
MOT OROLA INC FCC ID: AZ489FT4827
INSTRUCTION MANUAL
X Preliminary Manual attached.
Complete Manual attached.
Page 2
MOT OROLA INC FCC ID: AZ489FT4827
FP7 SLK Manual updates ver 0.1
TEXT REMOVALS:
• Remove 3rd Note under To Set
Channel and Code regarding
voice verification of settings.
• Remove section on To Check
Channel and Code
Remove Belt Clip
•
FEATURE REVISIONS:
After Let’s Talk About Your New Radio
Batteries
Talk About SLK radios operate on either 3 AA alkaline batteries
or a nickel metal hydride rechargeable battery pack, providing
????
• installati on of both types to be noted
Set Th e Chan nel And Code
1. Current channel is the large number on the LCD
.
section, insert:
2. Press t he M ode But ton onc e, C han nel in dica tor will ap pea r on
display. Use the Scroll Button to set new channel.
3. P ress the Mode Button twice, current code (small number)
will
flash and radio beeps to indicate code change mode.
4. Use Scroll buttons to select a new code while number is
flashing.
Note:
• To talk to other radios that do not have Interference Eliminator
Codes, set your code to 0.
• Radio automatically saves new code after 3 seconds.
Lock
Lock allows you to disable the radios primary settings so they
can not be changed accidentally. To activate the Lock feature,
pres s the Lo ck b utton. T he r adio will be ep a nd t he Lock
indica tor will ap pea r on the disp lay. Only th e P ush -To-Talk
(PTT ), Mon itor, Light, an d Powe r bu ttons w ill rem ain a ctive.
• verify wi th software statement of work
The radio will b eep if an y disable d bu ttons a re p res sed. To
disable the Lock feature, press the Lock button again. T he radio
will bee p and th e Lo ck in dicator will dis appear .
Light
Talk About radios have a backlit display for usage in low-light
conditions. T o activate the Light, press the Light button. T he
light will t urn on f or f ive seconds. Pressing any other buttons on
the r adio will ext end the period o f tim e the dis play is ba cklit.
Scan (TalkAbout SLK 200 onl y)
Page 3
MOT OROLA INC FCC ID: AZ489FT4827
Scan allows you to monitor the radio’s channels and code. When
the radio detects channel activity on your radio’s code, it stops
Scanning and locks in on the active channel. It allows you to
listen and talk back automatically to the person transmitting
without having to switch channels.
The Scan function is user adjustable to monitor either selected
Interference Eliminator Codes, all Interference Eliminator Codes,
or all frequency usage.
Note:
• To communicate in selected Interference Eliminator Code
Scan, your radio must be set to the same code as the other
radio(s) in your group. If your radio is set to a different code,
the S can fea tur e in t his sett ing will n ot dete ct c han nel activ ity in
your group.
• When selected Scan type is all Interference Eliminator Codes,
you will hear all chann el ac tivit y except fro m ra dios without
codes (CSQ). T o hear uncoded radios, set the Scan type to
setting 3 to hear all Interference Eliminator Codes and CSQ.
To use Scan Fe at u re
Pre ss the S can button , radio will beep a nd
1.
flash ing Scan in dica tor will appea r on the
display.
When the radio detects channel activity,
2.
you will hear the mes sage . The Sca n
indica tor will st op f lashing an d th e
displa y will indica te t he a ctive
channel.
Press Push-To-T alk button to talk back on
3.
the active channel. If channel activity ceases,
the r adio will re tur n to Sca n mo de a fter
three seconds. T he display will return to
the primary channel and the Scan indicator
will begin to flash again .
In Scan, you will a lway s trans mit b ack
4.
to the channel visible on the display.
To turn off Scan, press the Scan
5.
butt on again. T he radio will be ep a nd the
Scan indicato r will d isappea r.
Notes:
• In Scan, after you receive a message, the radio will re main on
the active channel for three seconds before returning to Scan
mode . T his w ill be in dicated by t he f lashing Sc an in dica tor.
• In Scan, you will not b e ab le to cha nge t he p rimary c han nel o r
code setting. T o change the primary channel or code, first
disable Scan operation by pressing the Scan button again.
Call ( TalkAbout SLK 200 only)
The TalkAbout SLK 200 has 9 user-selectable call alert tones
to alert other radio users to an incoming message and identify
the t ransmit ting r adio. Othe r ra dio user s will h ear your call
Page 4
MOT OROLA INC FCC ID: AZ489FT4827
alert tone before receiving the incoming message. To use the
call feature, press the Call Button before pressing the Push-ToTalk button.
To ch an ge Call Tone
Press the Mode button four times, the call indicator will
1.
appe ar on th e dis play and the call n umber w ill app ear on the
display.
Use the Scroll buttons to change the call tone.
2.
VOX REVISIONS:
To Use VOX Feature:
Make sure the radio is off.
1.
Open accessory jack cover and plug
2.
accessory’s connector into jack.
Turn radio on and lower volume before
3.
placing accessory on head or in ear. The
VOX ind icator w ill app ear on the d ispla y to
indicate that the VOX feature is active.
Press Monitor button while rotating Volume
4.
Dial to adjust volume to a comfortable
listening level.
To transmit, speak into accessory
5.
microphone. To receive, stop talking.
The re will be a brie f de lay betw een whe n you start or stop
Note:
talking and radio transmission.
Reset to Push-To-Talk Mode:
Press Push-To-T alk button once. T he VOX
1.
indica tor will dis app ear .
To transmit, press P ush-To-Talk button on
2.
radio. To receive, release the Push-To-Talk.
To return to VOX mode, turn the radio off,
3.
then on again.
The accessory jack cover is not detachable and should be
Note:
closed when not in use.
EXHIBIT 11
Loading...