Motorola 89182N, H680 User Manual
d
m
o
BEFORE Y
O
Before using this product, read the Important Safety an
Take a moment before you get started to fa
Bluetooth Handsfree Headset. Along with y
both charging and storage.
motorola
H680
Quick Start Guide
U BEGIN
Legal Information pamphlet and follow its instructions.
iliarize yourself with your new H680
ur headset, a charger case is provided for
Speaker
Power
Switch
1
Your Headset's Battery
Important: Your headset must be turned off
when charging. If you turned the headset on,
see “Turning Headset On and Off” on reverse
side for details on turning headset off.
Call
Button
CHARGE
Volume
Buttons
Indicator
Light
Charging
Contacts
(on reverse
side)
Microphone
Charger
Cover
Charger
Por t
Charging
Contacts
START HERE >
Plug the Motorola charger into the port on the
1
charger case.
Place headset into charger case ensuring that
2
charging contacts on the headset and charging
case connect.
Charging
Contacts
The indicator light turns red when the battery is
charging. It may take up to 1 minute for the
indicator light to turn on. When the headset's
battery is fully charged (about 2.5 hours), the
indicator light turns off.
Disconnect the charger.
3
2
p
START BLUETOOTH
FEATURE
Your Phone
3
PAIR
Your Headset
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
M
Press (
1
Menu) > Settings > Connection >
Bluetooth Link > Setup.
2
Scroll to Power.
3
Select Change.
Scroll to On.
4
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Remove headset from charging base and
power on by sliding Power switch to the On
position (towards Power symbol on headset).
The indicator light flashes to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
Indicator Light
(steadily blue
for pairing mode)
If the headset does not enter pairing mode,
see TROUBLESHOOTING for hel
.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809510A87-O
Bluetooth ID: B012842
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2007.
3
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
On your Motorola phone, press (
1
PAI R
CONTINUED
Your Phone
M
Menu) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H680.
2
Select OK or Ye s to pair your headset with
3
your phone.
4
Enter the passkey: 0000
Select OK.
5
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Loading...