Motorola 6809496A47-A User Manual

Start Here > > >

HT820

Bluetooth®

Stereo Headphones

USE THE HT820

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

You can use your HT820 headphones simultaneously with a Bluetooth A2DP enabled audio device and your Bluetooth cell phones!

Listen to music, hear a beep, and transfer to take the call on the headphones. Hang up the call with a push of a button and your music automically continues playing.

Any Bluetooth Enabled Audio

Device*

HT820

Bluetooth Enabled

Ready to make it work?

Phone

- Charge your Headphones for 2 Hours (CHARGE)

- Pair headphones & audio device (PAIR)

- Pair phone & headphones (back side of this guide)

- Listen to music and take calls!

*The Bluetooth Enabled Audio Device must be A2DP compatible

CHARGE

Your Headphones' Battery

Before using your HT820 for the first time, charge the headphones for 2 hours:

Charger

Plug the Motorola charger into the headphones. The indicator light turns on when the battery is charging. When the headphones' battery is fully charged, the indicator light turns off.

Disconnect the charger.

Note: Headphones do not function while charging.

You can also use a Motorola Original™ Vehicle Power Adapter to charge your headphones while in your vehicle.

A fully charged battery provides approximately: 14 hrs of music listening, 17 hrs of talk time, or 500 hrs of standby time.

Insert Charger

Here

Music Button

Indicator

Light

(Right Side)

PAIR

Before you can use your headphones with a Bluetooth enabled product, you must pair it with that product. To pair:

Make sure your headphones are turned off

(see Turning On and Off ) and press and

hold the left side Call

button for 6 seconds until the indicator light turns on and remains steadily lit.

Call Button with

Indicator Light

(Left Side)

Next, put your Bluetooth Enabled audio

device in pairing mode so the devices can "talk" to each other.

For details about putting Bluetooth Enabled devices in pairing mode, refer to

the device's User's Guide for directions.

Note: To pair the headphones with your phone, see "Pair with your Phone," on the reverse side of this guide.

TEST AND USE

Your Headphones & Audio Device

Your headphones are successfully paired with a device and ready to use when the blue indicator lights changes from steadily lit, flashes rapidly, and then slowly flashes.

To confirm they are operating properly:

Place the headphones on your head. See

Wear the Headphones in this guide.

Start playing music on the audio device. If

your headphones are successfully paired, you will hear music in the headphones.

Note: You may need to wait several seconds before hearing music in the headphones while the devices

connect.

See Music Controls for information about using the HT820 volume and playback controls.

After successfully pairing, you do not need to repeat these initial setup steps each time you use the headphones. Just power on both devices and they automatically connect.

Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA

www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada)

6809496A47-A

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005.

TURN ON AND OFF

To turn your headphones on, press and hold

the left side Call m button until the indicator light flashes 3 times (about 3 seconds).

Then,

release the button.

To turn your headphones off, press and hold the left side Call m button until the indicator

light flashes seconds)

rapidly and then turns off

(about 3

To conserve battery power, turn off the headphones when you will not be using it.

WEAR THE HEADPHONES

Your headphones are designed to be worn comfortably with the neck band positioned behind your head.

The microphone is located in the right ear-piece. Digital Signal processing is used for clear pickup of your voice during voice calls.

CONNECT SIMULTANEOUSLY

Simultaneous connect your headphones with a music device AND your phone!

Pair the headphones to the music device (PAIR). Then pair the headset with your phone (backside of guide). Power your headphones off and then back on. After a few moments it will connect with both the music device and phone.

Any Bluetooth Enabled Audio

Device*

Bluetooth Enabled Phone

Note: The remote control functions only work when the headphones are directly connected to source device. via Bluetooth.

Left Side

Call Button

To adjust the volume, press the

headphones.

To Skip Back to the previous song: Press the Skip Reverse Button

side of your headset. To Skip forward to the next song: Press the

Skip Forward Button

To Play, Pause, or Stop music: Press the Music Button

music.

To connect non-Bluetooth Devices to your headphones: Use the headphone jack and

the included cable.

MUSIC CONTROLS

Volume

Buttons

Indicator

Headphone

Jack

buttons on the left side of your

to play, pause, or stop the

Right Side

Skip Reverse

Music Button

Skip Forward

+ or

on the right

TROUBLESHOOTING

Are you having sound interruption or connection issues?



Bluetooth as a wireless technology could be subject to interference of other wireless traffic existing in your environment. Try turning your headphone off and back on. This automatically resets the connection.



If you experience audio interruptions while the headphone is connected to both music source and a Bluetooth phone, disconnecting the phone will eliminate the audio interruptions.

Support.

If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click

Support.

Features and

Functions Guide

HT820 Bluetooth®

Stereo Headphones

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side

of this guide

to complete initial setup

of your HT820.

PAIR

with YOUR PHONE

START BLUETOOTH Feature

Your phone's Bluetooth feature is off by default. So, to use your headset, you must turn on the Bluetooth feature in your phone.

For most Motorola phones:

Select (

Bluetooth Link > Setup.

Scroll to Power.

Press Change.

Scroll to On.

Press Select to turn on the Bluetooth

feature. Bluetooth feature remains on until you turn it off.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

Menu) > Settings > Connection >

Step

PUT HEADPHONES IN PAIRING

Make sure your headphones are turned off. If your headset is on, turn it off by

pressing and holding the left side Call

button until the indicator light flashes 3 times (about 3 seconds).

Music Button with

Indicator Light

(Right Side)

Call Button with

Indicator Light

(Left Side)

Note: For more details, see "Pair," Step 1 on the reverse side of this guide.

Step

SET THE PHONE TO LOOK FOR

YOUR HEADPHONES

For most Motorola phones:

Select (

Bluetooth Link > Handsfree > Look for Devices.

The phone lists all Bluetooth devices it finds. Select Motorola HT820.

Press OK or Yes to pair (link) the handsfree

device. Enter the passkey 0000 and press OK.

Note: Passkey cannot be changed from 0000.

When your headphones are successfully paired with your phone, the blue indicator light rapidly flashes and then resumes regular flashing.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

Menu) > Settings > Connection >

Your phone and headphones are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:

Place the headphones over your ear. See

Wear the Headset on the reverse side of this guide.

On your phone, dial the number you want

to call and press the Send key.

If your phone and headphones are

successfully paired, you will hear ringing in the headphones.

See Make Calls for details regarding answering and ending calls using the headset.

After you have successfully paired your phone and headphones, you do not need to repeat these initial setup steps each time you use the headphones. Just turn the power on and they will automatically connect.

TEST AND USE

Your Headphones & Phone

FOR MORE INFORMATION ON USING YOUR MOTOROLA HT820

Visit us at www.hellomoto.com/bluetooth and click Support.

SUPPORT

If you need more help, contact us at

1-877-MOTOBLU.

This symbol on a Motorola product means the product

should not be disposed of with household waste. Please

do not dispose of mobile telephones or electric

accessories, such as chargers or headsets, with your

household waste.

MAKE CALLS

Function Action

Make a voice dial call Short press left m button & speak the name after the tone

End a call Short press left

button

Receive a call Short press left

button

Reject a call Long press left

button until ringing

stops. Call ignored.

Redial last call Long press left button

Answer a second Press and hold the incoming call Call button (places first call on hold)

Note: Your HT820 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.

MAKE CALLS

Function Action

Use Call Waiting Long press left m button, 1st call put on hold. 2nd call becomes active.

Join a 3-way call Press both volume (Note: Feature is phone/ buttons network dependent.) at the same time. Both calls become active.

Put an active call on Long press left hold or resume a call button on hold

Mute a call Press the volume buttons at the same time.

Unmute a call Press either the

to unmute the mic.

CONTINUED

+ -

+ or the -

The indicator light provides information about your headphone status.

Headphone Indicator Status

On (steady) Charging Off Charging complete

Headphone Indicator Status

Off Power off On (steady) Pairing mode 10 rapid flashes Pairing successful Slow pulse Connected

To turn off the indicator lights, press both and indicator lights back on, press both

INDICATOR LIGHTS

With the Charger Plugged In

With No Charger Plugged In

at the same time. To turn the

at the same time.

and

AUDIO TONES

The audio tones provide information about your headphone status.

Audio Tone Headphone Status

Single high tone when Volume at minimum pressing volume button or maximum

Five rapid high tones Low battery repeated every 60 sec.

No audio indications; Out of range deteriorating quality

Ring tone Incoming call Single high tone Pairing confirmation Single low tone Voice activation Dual high/low tone Voice tag not

recognized Single high tone End call Low to high tone Phone network

not available Two tones Mute on / off Single tone Power on / off