Motorline professional MPIE10 Assembly And Operating Manual

Automatic Bollard

English

Please read the manual very

carefully before installation

AUTOMATIC BOLLARD

ASSEMBLY AND OPERATING MANUAL

MPIE10

400/600/800

V 2.1

R 03/2018

Page 01

Assembly manual of MPIE10 400/600/800

1) CAUTION: It is important to your safety that these instructions are followed. The
installation or misuse of this product may cause personal injuries or material damages.

A) Warning to the user and/or installer

Automatic Bollard

English

CONFORMITY:

Electrocelos S.A. declares, the automatic bollard MPIE10 follows the european
norms and directives:
2006/95/CE-Low voltage electrical equipment;
89/336/CEE-Electromagnetic compatibility.
EN 60335-1, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3
Electrocelos S.A. declares, the control board follows the directive 95/05/EC (R&TTE)

2) Keep these instructions in a safe place for future reference.

3) This product was designed and produced stricly for the use indicated in this manual.
Any other use other than the ones expressly indicated may damage the product and/or
be a source of danger, invalidating the warranty.

4) Electrocelos S.A. is not liable for the incorrect use of this product, or another use
other than the one for which it was designed.

5) Electrocelos S.A. is not liable if the safety standards were not taken into account
when installing the equipment to be automated, or for any deformation that may occur to it.

6) Before the installation, turn off the power supply.

7) Electrocelos S.A.

is not liable for the safety and proper installation of the product

when are used components that are not sold by itself.

8) Do not make any changes to the motor components and/or accessories.

9) The installer should inform the customer how to operate the product in emergencies
and provide him with a manual of use.

10) Keep the remote control out of reach of children, preventing the bollard to opperate
accidentally.

11) The custommer shall not, in any circunstances, attempt to repair or tune the
bollard. For this purpose, he must call a qualified technician.

12) Connect the bollard to a 230V power supply, with ground wire.

13) The equipment is determined for outdoor use.

Page 02

Model
Input

Power
Intensity
Thermical Protection
Temperature

WING400/600/800

24 VDC

60 W

1.2 - 4A

120ºC

>-20ºC; <+50ºC

Assembly manual of MPIE10 400/600/800

B) Technical Specifications

1) Motor Specifications:

Automatic Bollard

English

PVC 10 mm

Mobile piece
Covers

Anti-Slip Stainless Steel 4mm

Fitted material

INOX 2.5 mm

400 mm

Diameter
Course

370 / 570 / 785 mm

Top flange

204 mm

Fitted material

Weight capacity when closed

320 x 320 x 870 / 320 x 320 x 1080 / 320 x 320 x 1280 (mm)

20.000 Kg

Weight

35 /40 /45 Kg

2) Mechanical Specifications:

3) Physical Specifications: